Pd/Cu-Free Cobalt-Catalyzed Suzuki and Heck Using Green Bio-Magnetic Hybrid and DFT-Based Theoretical Study

Catalysis Letters - Several highly efficient and magnetically recyclable cobalt catalytic systems were prepared using magnetic chitosan and some safe and available organic compounds...     

An Insight View on Synthetic Protocol,Surface Activity,and Biological Aspects of Novel Biocompatible Quaternary Ammonium Cationic Gemini Surfactants

In this study, we prepared a novel series of diester-functionalized cationic gemini surfactants (C_m-E2O2-C_m) containing ethylene oxide as a spacer with varying alkyl chain lengths and characterized by ¹H NMR, FT-IR, elemental analysis, and ESI-MS. The physicochemical properties of the geminis were explored by tensiometry, fluorescence, dye solubilization, and Krafft point. These geminis acquire superior surface activity than the conventional surfactants. Fluorescence spectroscopy analysis affirmed that the micropolarity and aggregation number of micelles diminished with increase in the alkyl chain length. These geminis represent a new group of amphiphiles of considerably high biodegradability, better cleavability, and low toxicity as assessed by BOD test, FT-IR analysis, and HC₅₀ analysis, respectively. They also showed significant level of antimicrobial activity toward some specified bacterial strains of Gram-positive and Gram-negative by using agar well diffusion method. Furthermore, the thermogravimetric analysis provided information regarding thermal stabilities of the newly synthesized gemini surfactants.     

Facile Hydrothermal Synthesis of Hierarchical Sodium P Zeolite as a Nonphosphate Detergent Builder

This study reports the preparation of hierarchical NaP zeolite with the aim of obtaining a non-phosphate detergent builder as an alternative for environmental remediation from eutrophication phenomenon. Hierarchically structured NaP zeolite was easily synthesized hydrothermally and under different syntheses conditions. Samples were characterized using several standard techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, and N₂ adsorption–desorption analysis. Three powder detergents were prepared by mixing main components such as linear alkylbenzene sulfonate, sodium sulfate, sodium silicate, and sodium carbonate as well as different amounts of as-synthesized zeolite and sodium tripolyphosphate in the detergent formulation as potential detergency builders. Some different detergency tests as pH value, water insolubility, foam height, moisture content, alcohol insolubility, and surface tension measurement were carried out for all synthetic detergent samples and two commercial ones. The results demonstrated that the high cleaning performance of the powders was obtained as using eco-friendly zeolite builders in comparison with phosphate-based commercial and synthetic detergent samples.     

A review of machine learning applications in IoT-integrated modern power systems

This paper aims to provide a systematic and comprehensive survey of state-of-the-art machine learning techniques and their potential applications in IoT-integrated power systems.     

Machine-Learning based methods in short-term load forecasting

Short-term load forecasting is of great significance to the secure and efficient operation of power systems. However, loads can be affected by a variety of external impact factors and thus involve high levels of uncertainties. So it is a challenging task to achieve an accurate load forecast. This paper discusses three commonly-used machine-learning methods used for load forecasting, i.e., the support vector machine method, the random forest regression method, and the long short-term memory neural network method. The features and applications of these methods are analyzed and compared. By integrating the advantages of these methods, a fusion forecasting approach and a data preprocessing technique are proposed for improving the forecasting accuracy. A comparative study based on real load data is performed to verify that the proposed approach is capable of achieving a relatively higher forecasting accuracy.     

Analytical Modeling of Short-Channel Fully-Depleted Triple Work Function Metal Gate (TWFMG) SOI MESFET

Silicon - In this paper, a new structure: triple work function metal gate SOI MESFET, intended for integration into the deep-submicron CMOS technology, is proposed. The gate of the device consists...     

Perpetual effect of laser surface texturing on tribological properties of Ti3SiC2/GNP composite—A fretting wear study

Tribological properties of Ti₃SiC₂ ceramic and Ti₃SiC₂/GNP composite were investigated using fretting sliding against Si₃N₄ ball counter body at a load of 50 N for a sliding distance of 900 m, under non-textured lubricated (NTL), textured lubricated (TL) condition, and textured lubricated high temperature (TLHT). This paper presents the influence of laser surface texturing (LST) on Ti₃SiC₂ and its graphene nanoplatelets (GNP) reinforced composite established through spark plasma sintering (SPS), tested under fretting wear conditions. The coefficient of friction and wear rate of Ti₃SiC₂ and its graphene nanoplatelets reinforced composites were incontrovertibly enhanced with laser surface texturing as compared to non-textured Ti₃SiC₂ and its GNP composite. The TL surface of Ti₃SiC₂ composite reinforced with 15% GNP showed the lowest COF and wear rate. Almost negligible changes were observed for TLHT tests. The LST proved to an efficient technique for enhancing the friction and wear properties of Ti₃SiC₂ and Ti₃SiC₂/GNP composite.     

A potential trackable bone filler: Preparation and characterization

This study reported the synthesis of fluorescent hydroxyapatite/alginate/carbon quantum dots (HA/Alg/CQDs) nanocomposites via the co-precipitation technique. The N-doped CQDs as a new class of fluorescent materials were prepared by the citric acid pyrolysis method, with an average size around 4 nm. Physical, chemical, and optical properties of the synthesized nanocomposites were investigated by X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), field-emission scanning electron microscopy (FESEM), UV–visible spectroscopy, and photoluminescence (PL) spectroscopy, respectively. The PL spectroscopy data verified the favorable in vitro luminescent emission of the HA/Alg/CQDs nanocomposites in comparison with HA/Alg and HA samples. The XRD patterns of the prepared samples confirmed the formation of crystalline HA in all composites, possessing a Ca/P ratio around 1.5 as obtained by EDX elemental analysis. The FESEM analysis exhibited HA nanoplates that homogeneously distributed throughout the alginate matrix. Therefore, the synthesized nanocomposites could be regarded as potential trackable drug carriers for hard tissue engineering applications.     

Application of neuro-fuzzy techniques in oil pipeline ultrasonic nondestructive testing

This paper presents a novel approach to the problem of nondestructive pipeline testing using ultrasonic imaging. The identification of the flaw type and its dimensions are the most important problems in the pipeline inspection. Unlike typical methods, a decision based neural network is used for the detection of flaws. We train a generalized regression neural network to determine the dimensions of the corrosions and generate the whole image of both the internal and external walls of the oil pipeline. As an improvement to the detection algorithm, we introduce fuzzy decision-based neural network algorithms for the detection and classification of the corrosions. The simulation and experimental systems results show that these new methods outperform the existing methods.     

Fundamental parameters affecting electrospinning of PAN nanofibers as uniaxially aligned fibers

Electrospinning with a collector consisting of two pieces of electrically conductive substrates separated by a gap has been used to prepare uniaxially aligned PAN nanofibers. Solution of 15 wt % of PAN/DMF was used tentatively for electrospinning. The effects of width of the gap and applied voltage on degree of alignment were investigated using image‐processing technique by Fourier power spectrum method. The electrospinning conditions that gave the best alignment of nanofibers for 10–15 wt % solution concentrations were experimentally obtained. Bundles like multifilament yarns of uniaxially aligned nanofibers were prepared using a new simple method. After‐treatments of these bundles were carried out in boiling water under tension. A comparison was made between the crystallinity and mechanical behavior of posttreated and untreated bundles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4350–4357, 2006