Network‐coded multiple‐source cooperation aided relaying for free‐space optical transmission

A network‐coded cooperative relaying aided free‐space optical (FSO) transmission scheme is designed. The resultant multiple‐source cooperation diversity is exploited by the relay to mitigate the strong turbulence‐induced fading experienced in FSO channels. At the destination, an iterative multiple source detection algorithm is proposed in conjunction with a chip‐level soft network decoding method. Our performance evaluation results using simulation analysis demonstrate that the proposed FSO multiple source detection is capable of approaching the single‐user‐bound for transmission over Gamma–Gamma turbulence channels. Also, the network‐coded cooperative FSO scheme can achieve a significant BER improvement in comparison with conventional noncooperation schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

An energy-aware distributed clustering protocol in wireless sensor networks using fuzzy logic

Clustering is an effective approach for organizing a network into a connected hierarchy, load balancing, and prolonging the network lifetime. On the other hand, fuzzy logic is capable of wisely blending different parameters. This paper proposes an energy-aware distributed dynamic clustering protocol (ECPF) which applies three techniques: (1) non-probabilistic cluster head (CH) elections, (2) fuzzy logic, and (3) on demand clustering. The remaining energy of the nodes is the primary parameter for electing tentative CHs via a non-probabilistic fashion. A non-probabilistic CH election is implemented by introducing a delay inversely proportional to the residual energy of each node. Therefore, tentative CHs are selected based on their remaining energy. In addition, fuzzy logic is employed to evaluate the fitness (cost) of a node in order to choose a final CH from the set of neighboring tentative CHs. On the other hand, every regular (non CH) node elects to connect to the CH with the least fuzzy cost in its neighborhood. Besides, in ECPF, CH elections are performed sporadically (in contrast to performing it every round). Simulation results demonstrate that our approach performs better than well known protocols (LEACH, HEED, and CHEF) in terms of extending network lifetime and saving energy.     

Design of efficient power amplifier for low power transmitters

This paper presents a fully integrated, low transmit-power and high-efficiency 2.4 GHz class-E power amplifier (PA) in TSMC 0.18 μm CMOS process for low-power transmitters such as wireless sensor networks (WSN). In this paper, a new output load has been proposed. Also, analytical design equations have been included to design an efficient low power circuit. This PA, employs the pad capacitance and bond-wire inductance of the output node, for satisfying class-E zero-voltage switching (ZVS) condition and matching the antenna’s 50 Ω resistance. By using bond-wire inductance instead of inductor in the output filter, smaller chip size and higher efficiency has been achieved compared to other works for low transmit-power applications. Also, the effectiveness of bulk-drive technique on faster switching and increasing efficiency have been evaluated. It has been proved that this technique leads to increase the efficiency of switching PAs. This PA delivers a range of output power from 2.7 to 7.2 dBm with a supply voltage range from 500 to 850 mV while achieving overall power efficiency range of 57.3–60.7%.     

Advent of 2D Rhenium Disulfide (ReS2): Fundamentals to Applications

Rhenium disulfide (ReS₂) is a two‐dimensional (2D) group VII transition metal dichalcogenide (TMD). It is attributed with structural and vibrational anisotropy, layer‐independent electrical and optical properties, and metal‐free magnetism properties. These properties are unusual compared with more widely used group VI‐TMDs, e.g., MoS₂, MoSe₂, WS₂ and WSe₂. Consequently, it has attracted significant interest in recent years and is now being used for a variety of applications including solid state electronics, catalysis, and, energy harvesting and energy storage. It is anticipated that ReS₂ has the potential to be equally used in parallel with isotropic TMDs from group VI for all known applications and beyond. Therefore, a review on ReS₂ is very timely. In this first review on ReS₂, we critically analyze the available synthesis procedures and their pros/cons, atomic structure and lattice symmetry, crystal structure, and growth mechanisms with an insight into the orientation and architecture of domain and grain boundaries, decoupling of structural and vibrational properties, anisotropic electrical, optical, and magnetic properties impacted by crystal imperfections, doping and adatoms adsorptions, and contemporary applications in different areas.     

Functionalized Graphene as Extracellular Matrix Mimics: Toward Well‐Defined 2D Nanomaterials for Multivalent Virus Interactions

Polysulfated nanomaterials that mimic the extracellular cell matrix are of great interest for their potential to modulate cellular responses and to bind and neutralize pathogens. However, control over the density of active functional groups on such biomimetics is essential for efficient interactions, and this remains a challenge. In this regard, producing polysulfated graphene derivatives with control over their functionality is an intriguing accomplishment in order to obtain highly effective 2D platforms for pathogen interactions. Here, a facile and efficient method for the controlled attachment of a heparin sulfate mimic on the surface of graphene is reported. Dichlorotriazine groups are conjugated to the surface of graphene by a one‐pot [2+1] nitrene cycloaddition reaction at ambient conditions, providing derivatives with defined functionality. Consecutive step by step conjugation of hyperbranched polyglycerol to the dichlorotriazine groups and eventual conversion to the polyglycerol sulfate result in the graphene based heparin biomimetics. Scanning force microscopy, cryo‐transmission electron microscopy, and in vitro bioassays reveal strong interactions between the functionalized graphene (thoroughly covered by a sulfated polymer) and vesicular stomatitis virus. Infection experiments with highly sulfated versions of graphene drastically promote the infection process, leading to higher viral titers compared to nonsulfated analogues.     

Reproducible Circularly Secure Bit Encryption: Applications and Realizations

We give generic constructions of several fundamental cryptographic primitives based on a new encryption primitive that combines circular security for bit encryption with the so-called reproducibility property (Bellare et al. in Public key cryptography—PKC 2003, vol. 2567, pp. 85–99, Springer, 2003). At the heart of our constructions is a novel technique which gives a way of de-randomizing reproducible public-key bit encryption schemes and also a way of reducing one-wayness conditions of a constructed trapdoor function family (TDF) to circular security of the base scheme. The main primitives that we build from our encryption primitive include k-wise one-way TDFs (Rosen and Segev in SIAM J Comput 39(7):3058–3088, 2010), chosen-ciphertext-attack-secure encryption and deterministic encryption. Our results demonstrate a new set of applications of circularly secure encryption beyond fully homomorphic encryption and symbolic soundness. Finally, we show the plausibility of our assumptions by showing that the decisional Diffie–Hellman-based circularly secure scheme of Boneh et al. (Advances in cryptology—CRYPTO 2008, vol. 5157, Springer, 2008) and the subgroup indistinguishability-based scheme of Brakerski and Goldwasser (Advances in cryptology—CRYPTO 2010, vol. 6223, pp. 1–20, Springer, 2010) are both reproducible.     

Compact eight-channel wavelength demultiplexer using modified photonic crystal ring resonators for CWDM applications

An eight-channel wavelength demultiplexer by cascading of ring resonators (RRs) in photonic crystal (PhC) structure is proposed in this paper. In designing of this demultiplexer, we used eight square-shaped PhC RRs with different refractive index (RI) of defect rods to generate a distinctive resonance wavelength. Each PhC RR has a specific resonance wavelength with tuning a variety of design parameters such as RI of a whole, defect and inner rods and radius of defect rods. In operating wavelength of λ₀?=?1497 nm, the transmission power and quality factor (Q) of single RR are discovered as 96% and 1000, respectively. The average power transmission, channel spacing, crosstalk and full width at half maximum are found by finite difference time domain method to be about 96?±?1%, 2.25 nm, ??35 dB and 1.5 nm, respectively. Simulation outcomes demonstrate that the designed demultiplexer has a proper operation. The footprint of the designed device is about?~?115 μm², which makes this device a promising for future photonic integrated circuits.

     

Polymeric Nanoparticles as a Self-Adjuvanting Peptide Vaccine Delivery System: The Role of Shape

Antigens incorporated in subunit vaccines are typically poorly immunogenic, so a strong immunostimulant (adjuvant) and/or delivery system is required to boost immunogenicity. In this work, the various functional polymer nanostructures, that is, rods, worms, spheres, and tadpoles are used to develop potent peptide antigen delivery systems. The antigen PADRE-J8 (PJ8), derived from Group A Streptococcus (GAS) M-protein, is either physically mixed or chemically conjugated to polymeric nanoparticles of different shapes. The physical mixture of polymeric nanoparticles and antigen is more effective in inducing antibody production than their chemical conjugates. Moreover, rod-shaped polymeric nanoparticles in physical mixture with PJ8 elicited higher and more opsonic antibody titers than powerful complete Freund's adjuvant (CFA)-adjuvanted antigen. Herein, for the first time it is demonstrated that a) the block copolymer, in nanoparticle form, can act as an immune adjuvant, b) nanoparticle shape plays a crucial role in their immunogenicity, and c) antigen conjugation is not required, nor is antigen encapsulation or absorption.