Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Study of the High‐Pressure Vapour‐Liquid Equilibria for Strongly Non‐ideal Binary and Ternary Mixtures

High‐pressure vapour‐liquid equilibria for binary and ternary high polar and asymmetric systems are calculated using the Peng‐Robinson‐Stryjek‐Vera equation of state coupled with the Twu‐Coon (TWMR), the Orbey‐Sandler (OSMR) and the Wong‐Sandler (WSMR) mixing rules. Modified UNIFAC model is used for determining the activity coefficient and excess Gibbs free energy. The calculated results are compared with the experimental data and good agreement is observed. The average absolute deviation percents (AAD%)s indicated that the WSMR has less AAD% than other mixing rules in most of cases.     

Extraction of 2-hydroxyphenol by surfactant coated nanosized magnetic particles

A colloidal suspension of magnetic particles coated with double layer surfactant molecules was prepared, characterized and used for separation of some chemicals. The aqueous magnetic fluid was prepared by chemical precipitation method and characterized by total organic carbon analyzer (TOC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). The TOC and TGA measurements indicate that the prepared magnetic particles are coated with surfactant molecules in double layers. The outer surfactant layer has free polar heads. TEM measurement results show that magnetic particles are nanosized. A mixture of 2-hydroxyphenol (strong polar) and 2-nitrophenol (weak polar) was chosen as the target system. Results show that the magnetic fluid can selectively adsorb 2-hydroxyphenol from the mixture, whereas the adsorption of 2-nitrophenol is insignificant. For 2-hydroxyphenol, the adsorption equilibrium can be described well by Langmuir isotherm, and the adsorption kinetic can be fitted well by a linear driving force mass transfer model.     

Aldol condensation of butanal over alkali metal zeolites

Alkali metal zeolites and metal oxides were used for the aldol condensation of n-butanal to 2-ethyl-2-hexenal. The order of activity at 150 °C and 1 atm. was: CsNaY > NaY > LiNaY > MgO >Al₂O₃. Selectivity to 2-ethyl-2-hexenal was 100% for both pure and mixed isomer feed. Infrared spectroscopic studies showed that stable catalysts were produced by propene pretreatments which blocked Lewis acid sites. Adsorption of ammonia and carbon dioxide on CsNaY during aldol condensation of n-butanal causes a decrease in rate. This result, along with the order of activity, suggests that the presence of both acid and basic sites produce higher activity than strongly basic MgO.Work performed at San Jose State University.     

Effects of refining on chemical and physical properties of palm oil products

Some chemical changes in the composition and physical properties of palm oil products are discussed. The effects of bleaching and deodorization on oxidative properties and possible isomerization and interesterification of the fatty acids were indicated from laboratory refining experiments. Investigation of commercial samples of refined palm oil products showed that the conjugated dienes and trienes formed are minimal, indicating the use of good quality raw materials and mild processing conditions. Very little isomerization occurred in commercial refined products as indicated from the level oftrans acids, and changes in the POP to PPO triglycerides due to possible interesterification were insignificant. Changes in physical properties were inevitable due to the removal of free fatty acids and diglycerides and to minor impurities.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

Deep Neural Networks Regularization Using a Combination of Sparsity Inducing Feature Selection Methods

Neural Processing Letters - Deep learning is an important subcategory of machine learning approaches in which there is a hope of replacing man-made features with fully automatic extracted features....     

Context-aware saliency detection for image retargeting using convolutional neural networks

Multimedia Tools and Applications - Image retargeting is the task of making images capable of being displayed on screens with different sizes. This work should be done so that high-level visual...