Improved electrochemical performance of nitrocarburised stainless steel by hydrogenated amorphous carbon thin films for bone tissue engineering

In this study, hydrogenated amorphous carbon thin films, structurally similar to diamond‐like carbon (DLC), were deposited on the surface of untreated and plasma nitrocarburised (Nitrocarburizing‐treated) stainless steel medical implants using a plasma‐enhanced chemical vapour deposition method. The deposited DLC thin films on the nitrocarburising‐treated implants (CN+DLC) exhibited an appropriate adhesion to the substrates. The results clearly indicated that the applied DLC thin films showed excellent pitting and corrosion resistance with no considerable damage on the surface in comparison with the other samples. The CN+DLC thin films could be considered as an efficient approach for improving the biocompatibility and chemical inertness of metallic implants.Inspec keywords: tissue engineering, bone, biomedical materials, electrochemistry, amorphous state, carbon, hydrogen, thin films, plasma CVD, adhesion, corrosion resistance, surface hardeningOther keywords: electrochemical performance, plasma nitrocarburised stainless steel medical implants, hydrogenated amorphous carbon thin films, bone tissue engineering, plasma‐enhanced chemical vapour deposition method, adhesion, corrosion resistance, biocompatibility, chemical inertness, metallic implants, C:H     

Effect of microwave sintering on the microstructure and electrical properties of low-voltage ZnO varistors

Coarse-grained ZnO varistors for low-voltage applications were prepared by microwave sintering technique under different soaking times of 5–150?min. For comparison, a low-voltage ZnO varistor was also prepared through a conventional sintering process. Microwave sintering remarkably enhanced the grain growth rate of ZnO varistors. Average grain size of the sample prepared by microwave sintering in 15?min was about 20?µm, which is similar to the grain size of sample prepared conventionally in 150?min time. In addition to grain growth, an increase in microwave sintering time led to precipitation of zinc titanate (Zn₂TiO₄) on the top surface of samples which sintered for long dwell times. X-ray diffraction and scanning electron microscopy results from different points of the samples declared that precipitation of Zn₂TiO₄ phase is due to the high rate of bismuth evaporation of Bi-rich liquid from top surface and the reaction between remaining titanium ions on the surface with ZnO. The results showed that increasing sintering time from 5 to 150?min increased the grain size from 14 to 33?µm, consequently, the breakdown field decreased from 90 to 27?V/mm, respectively. These changes led to a switch in the varistor application, from low to very low voltage.     

A study on the effect of polishing fluid volume in ball end magnetorheological finishing process

Ball end magnetorheological finishing is a unique process that utilizes a magnetically controlled ball of polishing fluid at the tip of the rotating tool to finish workpiece of different materials and shapes. The aim of this research is to study the effect of polishing fluid volume on finishing spot size and the surface finish associated with it. A magnetostatic simulation is done to find the variation of flux density in the working gap and on the workpiece surface. The maximum limit of the polishing fluid volume is selected on the basis of area of threshold magnetic flux density (minimum value required for finishing) region on the workpiece surface. The surface characteristics and the diameter of the finished spot are analyzed by varying the fluid volume. The surface obtained with high fluid volume is poorly finished and has scratch marks as the excess fluid flows out from the working gap and forms a thick ring at the periphery of the tool tip. Contrary to this, if the fluid volume is too less, then it merely rotates over the workpiece surface without causing any finishing action. An optimum range of fluid volume produces a good quality surface finish with constant finished spot size.     

Semisupervised dimensionality reduction for hyperspectral images based on the combination of semisupervised learning and metric learning

This paper presents a semisupervised dimensionality reduction (DR) method based on the combination of semisupervised learning (SSL) and metric learning (ML) (CSSLML-DR) in order to overcome some existing limitations in HSIs analysis. Specifically, CSSML focuses on the difficulties of high dimensionality of hyperspectral images (HSIs) data, the insufficient number of labelled samples and inappropriate distance metric. CSSLML aims to learn a local metrics under which the similar samples are pushed as close as possible, and simultaneously, the different samples are pulled away as far as possible. CSSLML constructs two local-reweighted dynamic graphs in an iterative two-steps approach: L-step and V-step. In L-step, the local between-class and within-class graphs are updated. In V-step, the transformation matrix and the reduced space are updated. The algorithm is repeated until a stopping criterion is satisfied. Experimental results on two well-known hyperspectral image data sets demonstrate the superiority of CSSLML algorithm compared to some traditional DR methods.     

Hypersonic flight vehicle trajectory optimization using pattern search algorithm

In this work, trajectory optimization of an aerodynamically controlled hypersonic boost glide class of flight vehicle is presented. In order to meet the mission constraints such as controllability, skin temperature, and terminal conditions etc., the trajectory is optimized using a pattern search algorithm with the lift to drag (L/D) ratio as a control parameter. It is brought out that the approach offers a viable tool for optimizing trajectories for the considered class of vehicles. Further, the effects of the constraints on trajectory shape and performance are studied and the analysis is used to bring out an optimal vehicle configuration at the initial stage of the design process itself. The research also reveals that the pattern search algorithm offers superior performance in comparison with the genetic algorithm for this class of optimization problem.     

Silver Nanoflower Decorated Graphene Oxide Sponges for Highly Sensitive Variable Stiffness Stress Sensors

Soft conductive materials should enable large deformation while keeping high electrical conductivity and elasticity. The graphene oxide (GO)‐based sponge is a potential candidate to endow large deformation. However, it typically exhibits low conductivity and elasticity. Here, the highly conductive and elastic sponge composed of GO, flower‐shaped silver nanoparticles (AgNFs), and polyimide (GO‐AgNF‐PI sponge) are demonstrated. The average pore size and porosity are 114 µm and 94.7%, respectively. Ag NFs have thin petals (8–20 nm) protruding out of the surface of a spherical bud (300–350 nm) significantly enhancing the specific surface area (2.83 m² g^?1). The electrical conductivity (0.306 S m^?1 at 0% strain) of the GO‐AgNF‐PI sponge is increased by more than an order of magnitude with the addition of Ag NFs. A nearly perfect elasticity is obtained over a wide compressive strain range (0–90%). The strain‐dependent, nonlinear variation of Young's modulus of the sponge provides a unique opportunity as a variable stiffness stress sensor that operates over a wide stress range (0–10 kPa) with a high maximum sensitivity (0.572 kPa^?1). It allows grasping of a soft rose and a hard bottle, with the minimal object deformation, when attached on the finger of a robot gripper.     

Biosynthesis of SeNPs by Mycobacterium bovis and their enhancing effect on the immune response against HBs antigens: an in vivo study

Conventional hepatitis B vaccine contains alum but is less effective to induce Th1 response. Selenium nanoparticles and Bacillus Calmette–Guerin were reported as immune modulators. In this study, SeNPs were extracted from Mycobacterium bovis and characterised. SeNPs were mixed with HBs‐Ag and administered to the mice to investigate he immune response pattern. With an addition of Se ions at a sub‐inhibitory concentration to the Sauton medium broth after 24 h, SeNPs were extracted from M. bovis and characterised by Fourier transform infrared spectroscopy, dynamic light scattering, atomic forcemicroscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, and thermogravimetric analysis. Furthermore, female inbred BALB/c mice were injected subcutaneously on the first, 14th, 28th day with 100 and 200 µg doses of that SeNPs supplemented with HBs‐Ag vaccine. Later, the total antibody, isotypes of Immunoglobulin G1, Interlukin 4, and interferon‐γ were measured by enzye‐linked immunosorbent assay. The size of the SeNPs was <150 nm. Level of total antibody and immunoglobulin G2a increased significantly in the group that received 200 µg/ml nano selenium extracted from M. bovis. SeNPs in dose of 200 µg coated with organic materials of M. bovis could induce an influential immune response in relation to the conventional HBs‐Ag vaccine.Inspec keywords: selenium, nanoparticles, nanofabrication, microorganisms, Fourier transform spectra, infrared spectra, light scattering, atomic force microscopy, X‐ray chemical analysis, transmission electron microscopy, thermal analysis, nanomedicineOther keywords: biosynthesis, selenium nanoparticles, Mycobacterium bovis, enhnced immune response, HBs antigens, Bacillus Calmette‐Guerin, immune modulators, biogenic SeNPs, immune response pattern, Sauton medium broth, Fourier transform infrared spectroscopy, dynamic light scattering, atomic force microscopy, energy dispersive X‐ray spectrum, transmission electron microscopy, thermogravimetric analysis, female inbred BALB/c mice, antibody, IgG1 isotype, IgG2a isotype, IL₄ isotype, interferon‐γ, enzyme‐linked immunosorbent assay, bacterium, time 24 h, time 14 day, time 28 day, Se