Research advances on blockchain-as-a-service: architectures,applications and challenges

Due to the complexity of blockchain technology, it usually costs too much effort to build, maintain and monitor a blockchain system that supports a targeted application. To this end, the emerging “Blockchain as a Service” (BaaS) makes the blockchain and distributed ledgers more accessible, particularly for businesses, by reducing costs and overheads. BaaS combines the high computing power of cloud computing, the pervasiveness of IoT and the decentralization of blockchain, allowing people to build their own applications while ensuring the transparency and openness of the system. This paper surveys the research outputs of both academia and industry. First, it introduces the representative architectures of BaaS systems and then summarizes the research contributions of BaaS from the technologies for service provision, roles, container and virtualization, interfaces, customization and evaluation. The typical applications of BaaS in both academic and practical domains are also introduced. At present, the research on the blockchain is abundant, but research on BaaS is still in its infancy. Six challenges of BaaS are concluded in this paper for further study directions.     

Proposition of new computer artificial intelligence models for shear strength prediction of reinforced concrete beams

Engineering with Computers - The study is investigated the capacity of new artificial intelligence (AI) methodologies for shear strength (Vs) computation of reinforced concrete (RC) beams. The...     

Modelling of air damping effect on the performance of encapsulated MEMS resonators

Microsystem Technologies - The dynamic performance of a micro-resonator depends on its energy loss mechanism which is quantified by Q-factor (Quality factor). This paper presents numerical...     

Intrusion Detection Systems Using Blockchain Technology: A Review,Issues and Challenges

Intrusion detection systems that have emerged in recent decades can identify a variety of malicious attacks that target networks by employing several detection approaches. However, the current approaches have challenges in detecting intrusions, which may affect the performance of the overall detection system as well as network performance. For the time being, one of the most important creative technological advancements that plays a significant role in the professional world today is blockchain technology. Blockchain technology moves in the direction of persistent revolution and change. It is a chain of blocks that covers information and maintains trust between individuals no matter how far apart they are. Recently, blockchain was integrated into intrusion detection systems to enhance their overall performance. Blockchain has also been adopted in healthcare, supply chain management, and the Internet of Things. Blockchain uses robust cryptography with private and public keys, and it has numerous properties that have leveraged security’s performance over peer-to-peer networks without the need for a third party. To explore and highlight the importance of integrating blockchain with intrusion detection systems, this paper provides a comprehensive background of intrusion detection systems and blockchain technology. Furthermore, a comprehensive review of emerging intrusion detection systems based on blockchain technology is presented. Finally, this paper suggests important future research directions and trending topics in intrusion detection systems based on blockchain technology.     

Adherence rates to ferric citrate as compared to active control in patients with end stage kidney disease on dialysis

Introduction: Oral phosphate binders are the main stay of treatment of hyperphosphatemia. Adherence rates to ferric citrate, a recently approved phosphate binder, are unknown. Methods: We conducted a post‐hoc analysis to evaluate whether adherence rates were different for ferric citrate vs. active control in 412 subjects with end stage kidney disease (ESKD) who were randomized to ferric citrate vs. active control (sevelamer carbonate and/or calcium acetate). Adherence was defined as percent of actual number of pills taken to total number of pills prescribed. Findings: There were no significant differences in baseline characteristics including gender, race/ethnicity, and age between the ferric citrate and active control groups. Baseline phosphorus, calcium, and parathyroid hormone levels were similar. Mean (SD) adherence was 81.4% (17.4) and 81.7% (15.9) in the ferric citrate and active control groups, respectively (P = 0.88). Adherence remained similar between both groups after adjusting for gender, race/ethnicity, age, cardiovascular disease (CVD), and diabetic nephropathy (mean [95% CI]: 81.4% [78.2, 84.6] and 81.5% [77.7, 85.2] for ferric citrate and active control, respectively). Gender, race/ethnicity, age, and diagnosis of diabetic nephropathy did not influence adherence to the prescribed phosphate binder. Subjects with CVD had lower adherence rates to phosphate binder; this was significant only in the active control group. Discussion: Adherence rates to the phosphate binder, ferric citrate, were similar to adherence rates to active control. Similar adherence rates to ferric citrate are notable since tolerance to active control was an entry criteria and the study was open label. Gender, race/ethnicity, nor age influenced adherence.     

Photothermoelectric (PTE) Versus Photopyroelectric (PPE) Detection of Phase Transitions

The photopyroelectric (PPE) technique is one of the photothermal (PT) methods mostly used for phase transitions investigations. In this paper, we want to compare the PPE results with those obtained using another, recently developed PT method [the photothermoelectric (PTE) calorimetry] for the same purpose of detecting phase transitions. The well-known ferro-paraelectric phase transition of TGS, taking place at a convenient temperature (about \(49\, {}^{\circ }\hbox {C}\)), has been selected for demonstration. A comparison of the two PPE and PTE methods, both in the back detection configuration (in the special case of optically opaque sample and thermally thick regime for both sensors and sample) shows that they are equally suitable for phase transitions detection. Performing a proper calibration, the amplitude and phase of the signals can be used in order to obtain the critical behaviour of all sample’s static and dynamic thermal parameters.     

Novel method to transform ZnO nanorods into interlaced tattered nanosheets by changing the target inclination angle

ZnO nanoparticles were synthesized by liquid-phase pulse laser ablation of a Zn foil target immersed in deionized water. Nanosecond Q-switched Nd:YAG laser pulses of 532 nm were applied to the Zn foil target at a perpendicular and inclined (θ = 45°) angles. X-ray diffraction analysis revealed that both cases feature a ZnO nanostructure with a hexagonal wurtzite structure and that the particle size increases with the inclined target angle. Field emission scanning electron microscopy results of a colloidal drop cast on a glass substrate showed the ZnO has a nanorod structure in the case of a perpendicular target angle and an interlaced tattered nanosheet structure in the case of an inclined target angle. Photoluminescence spectra showed emission peaks in the UV, violet, blue, and green spectral regions, which correspond to excitonic and various defects resulting in an enhancement of emissions at inclined target angle.     

Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

Warm-Mix Asphalt (WMA) is a widely used product, which proved a contribution to the reduction in asphalt mixing and compaction temperatures. This reduction leads to lower fuel consumption and smoke emission in asphalt plants. Most of the characterisation of binders used in WMA has focused in the past on measuring linear viscoelastic properties and associated Superpave parameters. Several studies have shown that the average stresses and strains of the asphalt mixture remain mostly within the linear viscoelastic response. However, localised strains in the binder phase of the mixture could reach values high enough to induce nonlinear viscoelastic and viscoplastic deformations. Therefore, this study focuses on an experimental and analytical evaluation of linear, nonlinear viscoelastic and viscoplastic responses of selected binders modified for use in WMA. The first part of the paper analyses the linear viscoelastic material properties and their ability to evaluate permanent deformation resistance. Then, the non-recoverable creep compliance parameter obtained from the Multiple Stress Creep Recovery (MSCR) test is analysed to assess the nonlinear response and permanent deformation of asphalt binders. The paper utilises a nonlinear plasto-viscoelastic (NPVE) approach to assess and quantify the nonlinear plasto-viscoelastic response of binders by separating the recoverable and irrecoverable strains measured in the MSCR test. Two WMA additives were included in this study by mixing them with polymer-modified and unmodified asphalt binders. Analysis of results showed that the NPVE approach captured a higher percentage of recovery than the NLVE approach. However, binder’s performance evaluation and ranking did not change by adopting the NPVE approach. The nonlinear viscoelastic parameters provided insight on the behaviour of asphalt binders mixed with WMA additives during loading cycles. Sasobit showed higher influence than Advera on binders in resisting permanent deformation by increasing the recoverable strain during the unloading phase.