Mesoporous Ru/Sn-SBA-15 catalysts: synthesis,characterization and catalytic activity towards hydrogenation of levulinic acid

Journal of Porous Materials - Among the various biomass-derived platform chemicals, levulinic acid (LA) has been identified as one of the top-10 important molecules by Department of Energy, United...     

Solubility enhancement of steviol glycosides and characterization of their inclusion complexes with gamma-cyclodextrin

Steviol glycosidesrebaudioside (reb) A, C and D have low aqueous solubilities. To improve their aqueous solubilities, inclusion complex of steviol glycosides, reb A, C and D and gamma cyclodextrin were prepared by freeze drying method and further characterized by means of differential scanning calorimetry, Fourier transform infrared spectroscopy and Raman spectroscopy. The effect of gamma cyclodextrin on chemical shifts of the steviol glycosides was also studied in proton NMR experiments as well as in solid state (13)C CP/MAS NMR experiments. These results indicated that the steviol glycosides were clearly in inclusion complex formation with the gamma cyclodextrin which also results in solubility enhancement of these steviol glycosides. Phase solubility studies showed that amounts of soluble reb A, C and D increased with increasing amounts of gamma cyclodextrin indicating formation of 1:1 stoichiometric and higher order inclusion complexes.     

The effect of electrochemical lithiation on physicochemical properties of RF-sputtered Sn thin films

Thin films of Sn were deposited on Pt/Si substrates by sputtering technique and subjected to electrochemical lithiation studies. Electrochemical lithiation of Sn resulted in the formation of Sn–Li alloys of different compositions. Charging of Sn-coated Pt/Si electrodes was terminated at different potentials and the electrodes were examined for physicochemical properties. The scanning electron microscopy and atomic force microscopy images suggested that the Sn films expanded on lithiation. Roughness of the film increased with an increase in the quantity of Li present in Sn–Li alloy. Electrochemical impedance data suggested that the kinetics of charging became sluggish with an increase in the quantity of Li in Sn–Li alloy.     

Forming of Protein Bubbles and Porous Films Using Co‐Axial Electrohydrodynamic Flow Processing

Air and 5 wt.‐% BSA solution are used as a model system to generate protein‐coated microbubbles, which are significantly smaller in diameter than the processing needle apertures. The effects of processing parameters (applied voltage and flow rate) on the bubble size distribution and stability are studied. The optimal processing conditions are also explored in terms of heating of the solutions and prepared structures. Both individual microbubbles and porous films were successfully prepared using this method which has significant potential for the preparation of microbubbles for drug delivery systems, porous coatings, thin films, scaffolds and ultrasound contrast agents. The versatile nature of the method implies that many macromolecules and other active agents can be used.

     

Studies on Biocide Free and Biocide Loaded Zeolite Hybrid Polymer Coatings on Zinc Phosphated Mild Steel for the Protection of Ships Hulls from Biofouling and Corrosion

Biocide free and biocide loaded Zeolite epoxy coatings were formulated and covalently linked to diglycidyl ether bisphenol-A type epoxy resin which acts as a base material. These formulations were applied over the zinc phosphated mild steel specimens by a brushing method to give a thickness of 200 ± 10 μm. The effect of biocide on the corrosion and fouling resistance properties were evaluated by Thermo Gravimetric Analysis (TGA), polarization, electrochemical impedance and antifouling testing. The experimental evidence reveals that the linkage of biocide loaded Nano Zeolite has tremendous potential in resisting corrosion and fouling which is ideally required for marine environments and quite superior to the biocide free Zeolite coating. The purity and the structure of these coatings were examined by an FTIR spectral study.     

Service life prediction of organic coatings: electrochemical impedance spectroscopy vs actual service life

Electrochemical impedance spectroscopy (EIS) is used to derive an expression for predicting the service life of organic coating in a C4-type environment (industrial and costal areas with moderate salinity) as defined in ISO 12944 standard for paints and varnishes—corrosion protection of steel structures by protective paint systems. Three coating systems with a record of 2, 5, and 10 years of durability were selected for the study. The selection was also based on proven composition and dry film thickness (DFT) of the coatings as per ISO 12944. Electrochemical impedance measurements of the paint-coated panels were carried out by exposing the coated mild steel panels without scribe in different corrosive environments such as immersion in NaCl solution, neutral salt spray, etc. Neutral salt spray exposure was found to be the most severe corrosive environment among all the three coating systems. In most of the cases, EIS gave early indication of coating failure when compared to visual defects such as blistering and over-film corrosion.     

Effect of pro‐oxidants on biodegradation of polyethylene (LDPE) by indigenous fungal isolate,Aspergillus oryzae

Proxidant additives represent a promising solution to the problem of the environment contamination with polyethylene film litter. Pro‐oxidants accelerate photo‐ and thermo‐oxidation and consequent polymer chain cleavage rendering the product apparently more susceptible to biodegradation. In the present study, fungal strain, Aspergillus oryzae isolated from HDPE film (buried in soil for 3 months) utilized abiotically treated polyethylene (LDPE) as a sole carbon source and degraded it. Treatment with pro‐oxidant, manganese stearate followed by UV irradiation and incubation with A. oryzae resulted in maximum decrease in percentage of elongation and tensile strength by 62 and 51%, respectively, compared with other pro‐oxidant treated LDPE films which showed 45% (titanium stearate), 40% (iron stearate), and 39% (cobalt stearate) decrease in tensile strength. Fourier transform infrared (FTIR) analysis of proxidant treated LDPE films revealed generation of more number of carbonyl and carboxylic groups (1630–1840 cm⁻¹ and 1220–1340 cm⁻¹) compared with UV treated film. When these films were incubated with A. oryzae for 3 months complete degradation of carbonyl and carboxylic groups was achieved. Scanning electron microscopy of untreated and treated LDPE films also revealed that polymer has undergone degradation after abiotic and biotic treatments. This concludes proxidant treatment before UV irradiation accelerated photo‐oxidation of LDPE, caused functional groups to be generated in the polyethylene film and this resulted in biodegradation due to the consumption of carbonyl and carboxylic groups by A. oryzae which was evident by reduction in carbonyl peaks. Among the pro‐oxidants, manganese stearate treatment caused maximum degradation of polyethylene. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and water absorbency of crosslinked superabsorbent polymers

A series of novel copolymer superabsorbents based on monomer acrylamide (AM), potassium methacrylate (KMA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate (APS) as an initiator and N,N‐methylenebisacrylamide (MBA) as a crosslinking agent. The synthetic variables (the monomer concentration, crosslinker concentration, and initiator concentration) were also studied. The experimental results of superabsorbent polymers (SAPs) show a better absorbency in both water and NaCl solutions. The copolymers were characterized by IR spectroscopy. The water retention in the soil was enhanced using the above superabsorbents. The use of SAPs for the growth of groundnut plants was also investigated. SAPs can be considered for water‐managing materials for agriculture and horticulture purposes in desert and drought‐prone areas. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1795–1801, 2002     

Cellulose acetate and sulfonated polysulfone blend ultrafiltration membranes. I. Preparation and characterization

Modification of polymeric membrane materials by incorporation of hydrophilicity results in membranes with low fouling behavior and high flux. Hence, Polysulfone was functionalized by sulfonation and ultrafiltration membranes were prepared based on sulfonated polysulfone and cellulose acetate in various blend compositions. Polyethyleneglycol 600 was employed as a nonsolvent additive in various concentrations to the casting solution to improve the ultrafiltration performance of the resulting membranes. The total polymer concentration, cellulose acetate, and sulfonated polysulfone polymer blend composition, additive concentration, and its compatibility with polymer blends were optimized. The membranes prepared were characterized in terms of compaction, pure water flux, membrane resistance, and water content. The compaction takes place within 3–4 h for all the membranes. The pure water flux is determined largely by the composition of sulfonated polysulfone and concentration of additive. Membrane resistance is inversely proportional to pure water flux, and water content is proportional to pure water flux for all the membranes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1749–1761, 2002     

Direct Ink-Jet Printing of Vertical Walls

Direct jet printing can assemble ceramic powder into a three dimensional shape by firing droplets of ink through a nozzle to build a multiple layered structure. As with stereolithography and selective laser sintering, the surface texture is expected to witness the layered assembly. The ability to create vertical walls by direct ink-jet printing was explored using a test piece based on a maze. The structure and topography are discussed in terms of droplet spreading and drying.