Textural,Rheological and Sensory Properties and Oxidative Stability of Nut Spreads—A Review

Tree nuts are rich in macro and micronutrients, phytochemicals, tocopherols and phenolic compounds. The development of nut spreads would potentially increase the food uses of nuts and introduce consumers with a healthier, non-animal breakfast snack food. Nut spreads are spreadable products made from nuts that are ground into paste. Roasting and milling (particle size reduction) are two important stages for the production of nut spreads that affected the textural, rheological characteristic and overall quality of the nut spread. Textural, color, and flavor properties of nut spreads play a major role in consumer appeal, buying decisions and eventual consumption. Stability of nut spreads is influenced by its particle size. Proper combination of ingredients (nut paste, sweetener, vegetable oil and protein sources) is also required to ensure a stable nut spread product is produced. Most of the nut spreads behaved like a non-Newtonian pseudo-plastic fluid under yield stress which help the producers how to start pumping and stirring of the nut spreads. Similar to other high oil content products, nut spreads are susceptible to autoxidation. Their oxidation can be controlled by application of antioxidants, using processing techniques that minimize tocopherol and other natural antioxidant losses.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

The effect of magnetic and optic field in water electrolysis

Hydrogen production via water electrolysis was studied under the effect of magnetic and optical field. A diode solid state laser at blue, green and red were utilized as optical field source. Magnetic bar was employed as external magnetic field. The green laser has shown a greatest effect in hydrogen production due to its non-absorbance properties in the water. Thus its intensity of electrical field is high enough to dissociation of hydronium and hydroxide ions during orientation toward polarization of water. The potential to break the autoprotolysis and generate the auto-ionization is the mechanism of optical field to reveal the hydrogen production in water electrolysis. The magnetic field effect is more dominant to enhance the hydrogen production. The diamagnetic property of water has repelled the present of magnetic in water. Consequently the water splitting occurs due to the repulsive force induced by the external magnetic field. The magnetic distributed more homogenous in the water to involve more density of water molecule. As a result hydrogen production due to magnetic field is higher in comparison to optical field. However the combination both fields have generated superior effect whereby the hydrogen yields nine times higher in comparison to conventional water electrolysis.     

Correction to: Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Journal of Inorganic and Organometallic Polymers and Materials -     

Reinforcement of graphene nanoplatelets on plasticized poly(lactic acid) nanocomposites: Mechanical,thermal, morphology,and antibacterial properties

Plasticized poly(lactic acid) (PLA)‐based nanocomposites filled with graphene nanoplatelets (xGnP) and containing poly(ethylene glycol) (PEG) and epoxidized palm oil (EPO) with ratio 2 : 1 (2P : 1E) as hybrid plasticizer were prepared by melt blending method. The key objective is to take advantage of plasticization to increase the material ductility while preserving valuable stiffness, strength, and toughness via addition of xGnP. The tensile modulus of PLA/2P : 1E/0.1 wt % xGnP was substantially improved (30%) with strength and elasticity maintained, as compared to plasticized PLA. TGA analysis revealed that the xGnP was capable of acting as barrier to reduce thermal diffusion across the plasticized PLA matrix, and thus enhanced thermal stability of the plasticized PLA. Incorporation of xGnP also enhanced antimicrobial activity of nanocomposites toward Escherichia coli, Salmonella typhimurium, Staphylococcus aureus, and Listeria monocytogenes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41652.     

Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera

This paper deals with the measurement of surface temperature on metal powder during the laser consolidation process with two-color pyrometer. Additionally, the aspect of selective laser sintering (SLS) and selective laser melting (SLM) of metal powder is visualized with high speed video camera. As a result, the surface temperature during the laser irradiation was ranged 1520–1810 °C and the consolidation phenomena was classified according to the melting point of metal powder. The metal powder at the heating process cohered intermittently to the melt pool although the laser beam was continuously irradiated to the powder surface.     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Fabrication of oxide pellets containing lumped Gd2O3 using Y2O3‐stabilized ZrO2 for burnable absorber fuel applications

In this paper, the fabrication of novel burnable absorber fuel concepts with oxide pellets, containing either a lumped Gd₂O₃ rod, a mini‐pellet, or a spherical particle in the centerline of the oxide pellet, is investigated to propose the lumped Gd₂O₃ burnable absorber fuel concept to improve nuclear fuel performance with longer fuel cycle lengths and better fuel utilization. The unique characteristic of the lumped Gd₂O₃ burnable absorber fuel is its high spatial self‐shielding factor that reduces its burnout rate and, therefore, improves the reactivity control. Oxide pellets containing lumped Gd₂O₃ were fabricated by using a combination of cold isostatic pressing and microwave sintering at 1500°C to understand the potential technical issues in the fabrication of duplex burnable absorber fuel. The effect of the sintering temperature on the densification and phase transformation of 8 wt.% yttria‐stabilized zirconia, a surrogate for UO₂, was investigated. Spherical Gd₂O₃ particles were fabricated by the drip casting of a Gd₂O₃‐based Na alginate solution. The fabrication of duplex oxide pellets by using presintered Gd₂O₃ mini‐pellets resulted in internal cracks at the interface between the Gd₂O₃ and 8 wt.% yttria‐stabilized zirconia layers because of the mismatch of their densification. However, the formation of interfacial cracks was eliminated by controlling the initial sintered density of the lumped Gd₂O₃.     

Estimation of optimum binder content of recycled asphalt incorporating a wax warm additive using response surface method

This paper presents a new approach to estimate the optimum binder content (OBC) of recycled asphalts (RAs) incorporating a warm mix additive based on the interaction effects of compaction temperature, RA content and binder content using volumetric and strength characterisation. The experimental design was developed using response surface method (RSM) based on central composite design for various compaction temperatures (130–160 °C), RA contents (30–50%) and binder contents (4.9–6.0%). Laboratory tests were performed and analysed to meet the desired volumetric and strength properties according to the Malaysian specifications for the design of dense asphalt mixtures. Statistical analysis and mathematical models proposed by RSM were used to determine the OBC. The results showed that compaction temperature is the most significant factor in determining the OBC. There are minimum differences in the OBC variation of samples incorporating different dosage of RA. The developed model can be used for quick estimation of OBC for various levels of compaction temperature and RA content.