Low loss optical waveguide crossing based on octagonal resonant cavity coupling

A waveguide crossing utilizing a high index contrast material system is presented. The structure is based on coupling with an octagonal resonant cavity inserted at the waveguide junction. It also employs four identical square metal strips placed at the four comers of the waveguide crossing. The spectral response of the structure calculated using the method of line numerical technique, in general, shows a high power transmission in the forward arm with sufficiently low crosstalk and fraction of radiated power.     

Nanostructured β‐Bi2O3 Fractals on Carbon Fibers for Highly Selective CO2 Electroreduction to Formate

3D Bi₂O₃ fractal nanostructures (f‐Bi₂O₃) are directly self‐assembled on carbon fiber papers (CFP) using a scalable hot‐aerosol synthesis strategy. This approach provides high versatility in modulating the physiochemical properties of the Bi₂O₃ catalyst by a tailorable control of its crystalline size, loading, electron density as well as providing exposed stacking of the nanomaterials on the porous CFP substrate. As a result, when tested for electrochemical CO₂ reduction reactions (CO₂RR), these f‐Bi₂O₃ electrodes demonstrate superior conversion of CO₂ to formate (HCOO^?) with low onset overpotential and a high mass‐specific formate partial current density of ?52.2 mA mg^?1, which is ≈3 times higher than that of the drop‐casted control Bi₂O₃ catalyst (?15.5 mA mg^?1), and a high Faradaic efficiency (FE_HCOO^?) of 87% at an applied potential of ?1.2 V versus reversible hydrogen electrode. The findings reveal that the high exposure of roughened β‐phase Bi₂O₃/Bi edges and the improved electron density of these fractal structures are key contributors in attainment of high CO₂RR activity.     

Formulation of fumed silica grease from waste transformer oil as base oil

This study aimed to formulate fumed silica (FS) grease using waste transformer oil (WTO) and to investigate the grease properties. Various unexplored application of the reused WTO due to its reusable characteristic. WTO and fresh transformer oil (ITO) were used as grease base fluid and the properties of oil and grease were evaluated using ASTM International standards and SKF’s Grease Test Kit. The oil and grease chemical compound were determined using Fourier Transform-Infrared Spectroscopy at wavenumber of 500–4000?cm^?1. It was found that WTO have high viscosity index of 96 and low moisture content of 0.05% after pre-treatment than ITO. FS greases with and without MoS₂ were classified as NLGI 2 greases when FS content was 8%. Grease formulated with MoS₂ shows better performances in term of corrosiveness, oil bleed within ?15% to +15%, oil separation less than 4%, and dropping point of >300?°C. FTIR results shows no significant different between ITO and WTO, and between all formulated greases. Based on the findings, it was concluded that WTO can be utilized as an alternative base oil in grease formulation due to the good properties exhibited by the formulated WTO-based FS grease blended with MoS₂.     

Accurate analysis of MMI devices with two-dimensional confinement

The accurate analysis of multimode interference (MMI) devices with two-dimensional (2-D) confinement has been demonstrated by using the least squares boundary residual (LSBR) method. Accurate modal propagation constants and spatial field profiles in the MMI section are obtained by using the vector H-field based finite element method. The accurate calculation of the excited modal coefficients is achieved by using the LSBR, which satisfies the continuity of the transverse field components more rigorously than using simple overlap integrals     

Heat transfer from a spinning disk during semi-confined axial impingement from a rotating nozzle

Conjugate heat transfer from a uniformly heated spinning solid disk of finite thickness and radius during a semi-confined liquid jet impingement from a rotating nozzle is studied. The model covers the entire fluid region including the impinging jet on a flat circular disk and flow spreading out downstream under the spinning confinement plate and free surface flow after exposure to the ambient gaseous medium. The model examines how the heat transfer is affected by adding a secondary rotational flow under semi-confined jet impingement. The solution is made under steady state and laminar conditions. The study considered various plate materials such as aluminum, copper, silver, constantan and silicon. Ammonia, water, flouroinert FC-77 and MIL-7808 oil were used as working fluids. The range of parameters covered included Reynolds number (220–900), Ekman number (7.08 × 10^?5–∞), nozzle-to-target spacing (β = 0.25–1.0), disk thicknesses to nozzle diameter ratio (b/d_n = 0.25–1.67), Prandtl number (1.29–124.44) and solid to fluid thermal conductivity ratio (36.91–2222). It was found that a higher Reynolds number increased local heat transfer coefficient reducing the interface temperature difference over the entire disk surface. The rotational rate also increased local heat transfer coefficient under most conditions. An engineering correlation relating the Nusselt number with other dimensionless parameters was developed for the prediction of the system performance.     

Structural and opto-electrical properties of pyrolized ZnO-CdO crystalline thin films

A series of ZnO-CdO thin films of different molar ratios of Zn and Cd have been deposited on glass substrate at substrate temperature ~ 360 ℃ by the spray pyrolysis technique at an ambient atmosphere. X-ray diffraction (XRD) studies confirmed the polycrystalline nature of the film and modulated crystal structures of wurtzite (ZnO) and cubic (CdO) are formed. The evaluated lattice parameters, and crystallite size are consistent with literature. Dislocation density and strain increased in the film as the grain sizes of ZnO and CdO are decreased. The band gap energy varies from 3.20 to 2.21 eV depending on the Zn/Cd ratios in the film. An incident photon intensity dependent I-V study confirmed that the films are highly photosensitive. Current increased with the increase of the intensity of the light beam. The optical conductivity and the optical constants, such as extinction coefficient, refractive index and complex dielectric constants are evaluated from transmittance and reflectance spectra of the films and these parameters are found to be sensitive to photon energy and displayed intermediate optical properties between ZnO and CdO, making it preferable for applications as the buffer and window layers in solar cells.     

Extended sliding frame R-Aloha: Medium access control (MAC) protocol for mobile networks

Proliferation of mobile communication devices necessitates a reliable and efficient medium access control (MAC) protocol. In this paper, A MAC protocol, called extended sliding frame reservation Aloha (ESFRA), based on sliding frame R-Aloha (SFRA) is proposed for network access technique. ESFRA is particularly designed to solve the mobile hidden station (MHS) problem in a mobile ad hoc network (MANET) by including relative locations of transmitting stations in the packet frame information header. The MHS problem is unique in mobile networks and occurs if a mobile station enters in a collision free zone of any ongoing communication and disturbs this communication with its transmission. In addition to the MHS problem, ESFRA simultaneously solves hidden station, exposed station, and neighborhood capture problems typically observed in wireless networks. A Markov model of ESFRA is developed and provided here to estimate throughput, delay and collision probabilities of the proposed protocol. The Markov modeling is extended to the analysis of SFRA and IEEE 802.11 to compare these competing MAC protocols with ESFRA. The analysis shows that ESFRA decreases frame transmission delay, increases throughput, and reduces collision probabilities compared to IEEE 802.11 and SFRA. ESFRA improves the network throughput 28 percent compared to that of IEEE 802.11, and 33 percent compared to that of SFRA. The improved performance is obtained at the expense of the synchronization compared to IEEE 802.11, but there is virtually no extra cost compared to SFRA.     

Resource efficient network design and traffic grooming strategy with guaranteed survivability

In WDM networks, path protection has emerged as a widely accepted technique for providing guaranteed survivability of network traffic. However, it requires allocating resources for backup lightpaths, which remain idle under normal fault-free conditions. In this paper, we introduce a new design strategy for survivable network design, which guarantees survivability of all ongoing connections that requires significantly fewer network resources than protection based techniques. In survivable routing, the goal is to find a Route and Wavelength Assignment (RWA) such that the logical topology remains connected for all single link failures. However, even if the logical topology remains connected after any single link fault, it may not have sufficient capacity to support all the requests for data communication, for all single fault scenarios. To address this deficiency, we have proposed two independent but related problem formulations. To handle our first formulation, we have presented an Integer Linear Program (ILP) that augments the concept of survivable routing by allowing rerouting of sub-wavelength traffic carried on each lightpath and finding an RWA that maximizes the amount of traffic that can be supported by the network in the presence of any single link failure. To handle our second formulation, we have proposed a new design approach that integrates the topology design and the RWA in such a way that the resulting logical topology is able to handle the entire set of traffic requests after any single link failure. For the second problem, we have first presented an ILP formulation for optimally designing a survivable logical topology, and then proposed a heuristic for larger networks. Experimental results demonstrate that this new approach is able to provide guaranteed bandwidth, and is much more efficient in terms of resource utilization, compared to both dedicated and shared path protection schemes.     

Label‐QoS switching protocol for quality of service assurance in dynamic swarm robot local network

This paper presents the modeling and analysis of a proposed label–quality of service (QoS) switching protocol for heterogeneous robot in a swarm. Establishing the data communication and network in multirobot task allocation is an important aspect in robot collaboration. Instead of passing the data through the cloud network, each robot can be configured as a node in its swarm for intercommunication. This research was conducted to model and propose aggregation and classification methods in a swarm robot network inspired from multiprotocol label switching, namely, label‐QoS switching protocol. Each packet of data is forwarded with a proposed 2‐side label values that are concerned with addressing and QoS. This proposed protocol was applied in each of the node's routing, and it was set up with forwarding information table. The simulation and analysis were conducted in 2 situations: (1) with a constant n–label switch mobile robot and a number of packet data increasing with time and (2) with a constant number of packet and varying n–label switch mobile robot by time. With reference to the network parameter performances, it shows that the anomaly treatment by the proposed protocol is able to prioritize the data forwarding between the robots at the edge of the swarm with class of service although the robot community at the center is increasing or getting crowded.     

Interconnect limits on gigascale integration (GSI) in the 21stcentury

Twenty-first century opportunities for GSI will be governed in part by a hierarchy of physical limits on interconnects whose levels are codified as fundamental, material, device, circuit, and system. Fundamental limits are derived from the basic axioms of electromagnetic, communication, and thermodynamic theories, which immutably restrict interconnect performance, energy dissipation, and noise reduction. At the material level, the conductor resistivity increases substantially in sub-50-nm technology due to scattering mechanisms that are controlled by quantum mechanical phenomena and structural/morphological effects. At the device and circuit level, interconnect scaling significantly increases interconnect crosstalk and latency. Reverse scaling of global interconnects causes inductance to influence on-chip interconnect transients such that even with ideal return paths, mutual inductance increases crosstalk by up to 60% over that predicted by conventional RC models. At the system level, the number of metal levels explodes for highly connected 2-D logic megacells that double in size every two years such that by 2014 the number is significantly larger than ITRS projections. This result emphasizes that changes in design, technology, and architecture are needed to cope with the onslaught of wiring demands. One potential solution is 3-D integration of transistors, which is expected to significantly improve interconnect performance. Increasing the number of active layers, including the use of separate layers for repeaters, and optimizing the wiring network, yields an improvement in interconnect performance of up to 145% at the 50-nm node