Viscoelastic and thermal properties of natural rubber low-density polyethylene composites with boric acid and borax

The influence of boric acid (BA) and borax (BO) neutron-absorbing fillers on thermal stability and viscoelastic behavior of natural rubber (NR) low-density polyethylene composites has been studied. The thermal degradation and dynamic mechanical properties of the composites have been analyzed as a function of temperature. The results revealed the enhancement of thermal stability of the composites by the addition of BA and BO fillers. The flame resistance of the material was improved by the addition of both the fillers. The storage modulus was found to be dependent upon the temperature and nature of the filler. The amount of NR chains immobilized by filler particles has been quantified from dynamic mechanical analysis and secondary filler/filler interactions have been verified by the Payne effect analysis. Finally, the experimental results have been compared with theoretical predictions.     

Distribution of Partial Digestion Products of Hydroxypropyl Derivatives of Maize (NM), Waxy Maize (WM) and High Amylose (HA) Maize Starches

Porcine pancreatic α-amylase digests of native and hydroxypropyl derivatives of maize, waxy maize and high amylose maize starches were subjected to ethanolic fractionation into oligosaccharide and polysaccharide fractions. Both fractions of the partial digests were analysed for blue values, reducing values, total carbohydrate, average degree of polymerisation and molar substitution (MS). Distribution of hydroxypropyl groups between the fractions varied depending on starch type and level of substitution with the polysaccharide fraction being higher in MS. Blue values (BV) and average degree of polymerisation (DP) tended to decrease with digestion while reducing (RV) increased.     

Effect of pH,Temperature and Reaction Time on Calcium Binding by Hydroxypropyl Rice Starches

Calcium binding by both native and hydroxypropyl starches was studied in aqueous media under different pH, temperature and reaction times at various calcium: starch ratios. Calcium binding was markedly influenced by pHs and temperatures of the reaction mixture. Reaction times did not show marked influence on calcium binding. Maximum calcium binding was observed in alkaline pH and at lower temperature. Most of the calcium bound within the first 20 minutes. Thus, alkaline pH and lower temperature is more favourable for calcium binding by both native and hydroxypropyl rice starches compared to acidic pH and higher temperatures.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Ergogenic Attributes of Young and Mature Coconut (Cocos nucifera L.) Water Based on Physical Properties,Sugars and Electrolytes Contents

The present work aimed to compare the main ergogenic attributes of two commercialized stages (young and mature) of coconut water (CW) obtained from four coconut varieties. The changes of electrolytes and sugars in CW upon maturation were quantified by inductively coupled plasma mass spectrophotometer and high-performance liquid chromatography, respectively. Based on the electrolyte profiling, potassium yielded the highest amount (ranging from 237.41 to 361.20 mg/100 mL) followed by sodium, magnesium, calcium, iron, manganese, copper, selenium, and zinc across all the maturity stages tested. For sugars, there were lower amounts of fructose and glucose, but a higher amount of sucrose with the maturation of the fruits. In conclusion, the amount of beneficial nutrients in the form of sugars and minerals was higher than that of young CW, and the ergogenic attributes of mature CW especially from MATAG variety (M-MATAG) were the best to be exploited further in the development of natural energy drinks.     

Occurrence of two genotypes of tetracycline (TC) resistance gene tet(M) in the TC-resistant bacteria in marine sediments of Japan

The tetracycline (TC) resistance gene tet(M) was monitored in bacteria isolated from Japanese coastal and off-shore marine sediments. The high rate of occurrence of TC resistant (TC(r)) bacteria (120 microg mL(-1) TC) was observed at frequency ranges between 0.0-0.08% in Tokyo Bay, 1.67-1.82% in Sagami Bay and 0.0-4.35% in the open Pacific Ocean. The tet(M) gene was PCR amplified from the TC(r) isolates, showing 127 of 209 isolates (60.8%) as positive. The rate of occurrence of tet(M) was between 32.0-96.0%, 21.1 -28.0% and 0.0-83.3% in the isolates from Tokyo Bay, Sagami Bay and the open Pacific Ocean, respectively. The tet(M) positive isolates belonged to 4 orders of bacteria. Bacillales was the most dominant order (121 strains) among tet(M) possessing bacteria, followed by Actinomycetales (three strains), Flavobacteriales (one strain) and Pseudomonadales (one strain). This indicates that tet(M) is present in various bacterial species and suggests that marine sediments are a natural reservoir of the tet(M) gene. Nucleotide sequence of the tet(M) revealed that two genotypes of tet(M) were found in the bacteria. The two genotypes were placed in genetically distant branches of the phylogenetic tree, suggesting that the two tet(M)s have different origins.     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Occurrence of phthalate metabolites in human urine from several Asian countries

The occurrence of 14 phthalate metabolites was found in human urine samples collected from seven Asian countries: China, India, Japan, Korea, Kuwait, Malaysia, and Vietnam. Phthalate metabolites were found in all samples, indicating widespread exposure of humans to phthalates in these Asian countries. The highest total (the sum of 14 phthalates) phthalate metabolite concentrations were found in samples collected from Kuwait (median: 1050 ng/mL), followed in decreasing order by samples from India (389 ng/mL), China (234 ng/mL), Vietnam (133 ng/mL), Japan (120 ng/mL), Korea (117 ng/mL), and Malaysia (94.9 ng/mL). The creatinine-adjusted median concentrations of total phthalates for urine samples from Kuwait, India, China, Vietnam, Japan, Korea, and Malaysia were 692, 506, 289, 119, 103, 104, and 169 μg/g creatinine, respectively. Monomethyl phthalate (mMP), monoethyl phthalate (mEP), mono (2-isobutyl phthalate) (miBP), mono-n-butyl phthalate (mBP), and metabolites of di-(2-ethylhexyl) phthalate (DEHP) were the dominant compounds, collectively accounting for >95% of the total concentrations in the samples from the seven countries. The profiles of urinary phthalate metabolite concentrations varied among the samples collected from the seven countries. Urine samples from Kuwait contained the highest concentrations of mEP (median: 391 ng/mL), mBP (94.1 ng/mL), and the metabolites of DEHP (202 ng/mL), whereas samples from China and Japan contained the highest concentrations of miBP (50.8 ng/mL) and mMP (17.5 ng/mL), respectively. mEP was the predominant metabolite in urine samples from India and Kuwait (accounting for 49% of the total), mBP and miBP were the predominant compounds in samples from China (52%), and DEHP metabolites were the predominant compounds in samples from Korea (46%) and Vietnam (52%). Based on the urinary concentrations of mEP, mBP, miBP, and DEHP metabolites of the samples from the seven Asian countries, we estimated daily intake rates of diethyl phthalate (DEP), dibutyl phthalate (DBP), and DEHP. The results indicated that people in the seven Asian countries are exposed to DEP, DBP, and DEHP at levels well below the reference doses (RfD) suggested as unsafe by the U.S. Environmental Protection Agency (EPA). The estimated exposure doses to DEHP in Kuwait, however, were above the RfD recommended by the EPA.     

Mass balance of total mercury and monomethylmercury in coastal embayments of a volcanic island: significance of submarine groundwater discharge

To understand the contribution of submarine groundwater discharge (SGD) to the coastal mass budgets of Hg and monomethylmercury (MMHg), preliminary mass balance estimates were made for Hwasun and Bangdu Bays on Jeju Island, known to have large SGD due to the high permeability of the volcanic rocks. The mass balance results indicate that SGD is a main source of Hg in Hwasun Bay (23 ± 14 × 10(-2) mol yr(-1), 34%) and Bangdu Bay (23 ± 20 × 10(-2) mol yr(-1), 67%), although the contribution from atmospheric deposition was considerable (25% for Hwasun and 23% for Bangdu). MMHg was also discharged primarily from submarine groundwater at Hwasun (0.30 ± 0.17 × 10(-2) mol yr(-1), 55%) and Bangdu (0.65 ± 0.49 × 10(-2) mol yr(-1), 64%), which was higher than atmospheric deposition (6% for Hwasun and 2% for Bangdu) and sediment diffusion flux (5% for Hwasun and 3% for Bangdu). The overall mass balance results suggest that, although there are large spatial variations in SGD rates throughout the region, the coastal mass budgets of Hg and MMHg need to include SGD as well as atmospheric deposition and sediment diffusion as primary sources of Hg and MMHg.     

Effect of processing on the composition and oxidative stability of coconut oil

The effect of various processing procedures on the composition and oxidative stability of coconut oil has been studied. The crude oil is relatively stable but major reductions in oxidative stability occur during the bleaching of oil degummed with phosphoric acid; during alkali refining; during the deodorization of oil degummed with citric acid and bleached; and during the deodorization of oil processed with a combined phosphoric acid degumming and bleaching operation. The reasons for the loss of oxidative stability during processing are discussed with reference to changes in the composition of the oil. Residual traces of citric acid or phosphoric acid play an important role in stabilizing processed oils. The tocopherol content is also important, although no additional stabilization of the oil occurs on adding levels of tocopherol above those present naturally in the crude oil. A combined phosphoric acid degumming and bleaching process leads to smaller losses of tocopherols than sequential treatments.