Effects of molasses grass,Melinis minutiflora volatiles on the foraging behavior of the cereal stemborer parasitoid,Cotesia sesamiae

Olfactory responses of the cereal stemborer parasitoid Cotesia sesamiae to volatiles emitted by gramineous host and nonhost plants of the stemborers were studied in a Y-tube olfactometer. The host plants were maize (Zea mays) and sorghum ( Sorghum bicolor), while the nonhost plant was molasses grass (Melinis minutiflora). In single-choice tests, females of C. sesamiae chose volatiles from infested and uninfested host plants and molasses grass over volatiles from the control (soil). In dual-choice tests, the wasp preferred volatiles from infested host plants to those from uninfested host plants. There was no discrimination between molasses grass volatiles and those of uninfested maize, uninfested sorghum, or infested maize. The wasp preferred sorghum volatiles over maize. Combining uninfested maize or sorghum with molasses grass did not make volatiles from the combination more attractive as compared to only uninfested host plants. Infested maize alone was as attractive as when combined with molasses grass. Infested sorghum was preferred over its combination with molasses grass. Local growth conditions of the molasses grasses influenced attractiveness to the parasitoids. Volatiles from Thika molasses grass were attractive, while those from Mbita molasses grass were not. Growing the Thika molasses grass in Mbita rendered it unattractive and vice versa with the Mbita molasses grass. This is a case of the same genotype expressing different phenotypes due to environmental factors.     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

A new technique for the construction of confusion component based on inverse LA-semigroups and its application in steganography

The present article introduced a novel idea for information hiding namely steganography. We have used new notions for the construction of the nonlinear component for block cipher based on inverse LA-semigroups. This nonlinear component fundamentally provides confidentiality in the proposed steganographic algorithm. The construction of the algorithm is fundamentally twofold. Firstly, we have constructed a novel scheme to design confusion component namely substitution box (S-box). Secondly, we have utilized the anticipated nonlinear component in digital steganography. The suggested algorithm is tested for different standard digital images. The authentication of the proposed algorithm is confirmed through statistical analysis.

     

PCA-DTT 2D-DHCES based attack resilient imperceptible image watermarking

Most schemes exhibit low robustness due to LSB’s (Least Significant Bit) and MSB’s (Most Significant Bit) based information hiding in the cover image. However, most of these IW schemes have low imperceptibility as the cover image distortion reveals to the attacker due to information hiding in MSB’s. In this paper, a hybrid image watermarking scheme is proposed based on integrating Robust Principal Component Analysis (R-PCA), Discrete Tchebichef Transform (DTT), and Singular Value Decomposition (SVD). A grayscale watermark image is twisted/scrambled using a 2D Discrete Hyper-chaotic Encryption System (2D-DHCES) to boost up the robustness/heftiness and security. The original cover image is crumbled into sparse components using R-PCA and using DTT the substantial component is additionally decomposed and the watermark will be embedded in the cover image using SVD processing. In DTT, scarcer coefficients hold the utmost energy, also provide an optimum sparse depiction of the substantial image edges and features that supports proficient retrieval of the watermark image even after unadorned image distortion based channel attacks. The imperceptibility and robustness of the proposed method are corroborated against a variety of signal processing channel attacks (salt and pepper noise, multi-directional shearing, cropping, and frequency filtering, etc.). The visual and quantifiable outcomes reveal that the proposed image watermarking scheme is much effective and delivers high forbearance against several image processing and geometric attacks.

     

Sensor Fault Diagnosis and Unknown Disturbances Estimation of High Switching Frequency Single-phase PWM Rectifier

International Journal of Control, Automation and Systems - The fault and disturbances estimation has an important role in the modern traction railway system. This paper proposes a unique method for...     

Automatic Quality Inspection of Bakery Products Based on Shape and Color Information

基于形状和颜色信息的烘焙产品的自动质量检测

Babar Khan,韩芳*,王直杰,Ather Iqbal

（东华大学 信息科学与技术学院,上海 201620）

创新点说明：

利用支持向量机和基于生物启发式HMAX模型的形状辨识器与RGB对抗颜色通道辨识器集成而形成一种有效的智能分类系统,并将其用于烘焙产品的质量检测。

研究目的：

本文要对烘焙产品进行更有效的质量检测,需要提出一种智能方法。

研究方法：

本文采用了支持向量机、基于生物启发式HMAX模型的形状辨识器与RGB对抗颜色通道辨识器集成,形成一种高级自动分类系统,对烘焙产品根据其形状和颜色（烘焙时间）进行对应分类。

结果：

利用本文方法对烘焙产品进行质量检测的结果与其它方法相比较,发现本文提出的基于生物启发的机器视觉系统运行更加精确和有效,同时发现采用One Versus One支持向量机和Directed Acyclic Graph支持向量机可以得到最大的分类精确率。本文方法对饼干形状和颜色的辨识分别达到了95%和100%的分类精确率。同时,算法稳定。

结论：

本文方法因其更加可靠和精确可用于代替现有的烘焙产品检测方法。

关键词：烘焙产品质量检测,计算机视觉,HMAX, 对抗颜色通道,RGB颜色辨识器,支持向量机

     

Single phase multi color emitting Ca2LuTaO6: Dy3+/Eu3+ double perovskite oxide phosphors

The trivalent rare-earth (RE³⁺) doped phosphors show tremendous achievement in narrow band multicolor line emission for various applications. However, the 4f–4f absorption transition of these ions is forbidden in UV and blue light excitation. Usually, a sensitizer having spin allowed transition was used as a co-dopant to excite these ions via the energy transfer phenomenon. Another approach promisingly using to excite these ions by efficient energy transfer from the intrinsic emission of the Ca₂LuTaO₆ double perovskite phosphors host lattice. Phosphors of Ca₂LuTaO₆ with double perovskite structure were synthesized by using a high-temperature solid-state reaction method. The produced Ca₂LuTaO₆ double perovskite phosphors show an intrinsic broad band emission centered at 424 nm under the excitation of 313 nm UV light. The origin of this broad band blue emission was deeply investigated by using computation and experimental approaches. The trivalent activator Dy³⁺ and Eu³⁺ were doped is a single and co-dopant in the produced Ca₂LuTaO₆ phosphors to check their excitation in UV and near-UV spectral region. X-ray diffraction and scanning electron microscopy were used to investigate the structure and phase analysis. Various characterizations such as photoluminescence excitation, emission, and CIE chromaticity coordinates were measured which illustrate the potential of Dy³⁺ and Eu³⁺ activated Ca₂LuTaO₆ double perovskite phosphors for narrow band multicolor line emission for various applications.     

Fabrication of co-PVDF/modacrylic/SiO2 nanofibrous membrane: Composite separator for safe and high performance lithium-ion batteries

Highly porous free-standing co-poly(vinylidene fluoride)/modacrylic/SiO₂ nanofibrous membrane was developed using electrically-assisted solution blow spinning method. The performance and the potential of the membrane as a lithium-ion battery separator were investigated. The addition of modacrylic enhanced the solution spinnability that resulted in defect-free membranes. Moreover, the presence of modacrylic enhanced the dimensional and thermal stabilities, while the addition of hydrophilic SiO₂ nanoparticle enhanced both mechanical property and ionic conductivity. Combustion test results illustrated that the presence of modacrylic provide flame retarding property over a set of different polymeric-based membranes. Electrochemical performance results showed that the developed membrane can increase the battery capacity compared with the commercial separator.     

Performance tuning of glass fiber/epoxy composites through interfacial modification upon integrating with dendrimer functionalized graphene oxide

In this study, glass fiber/epoxy composites were interfacially tailored by introducing polyamidoamine (PAM) dendrimer functionalized graphene oxide (GO) into epoxy matrix. Two different composites each containing varying loading fraction (0.5, 1.0, and 1.5 wt%) of GO and GO-PAM were fabricated via hot press processing. Composites were evaluated for interlaminar shear strength (ILSS), dynamic mechanical properties and thermal conductivity. The inclusion of 1.5 wt% GO-PAM resulted ~57.3%, ~42.7%, and ~54% enhancement in ILSS, storage modulus and thermal conductivity, respectively. Almost, ~71% reduction in coefficient of thermal expansion was also observed at same GO-PAM loading. Moreover, higher glass transition temperature was observed with GO-PAM addition. GO-PAM substantially improved fiber/matrix interfacial adhesion, which was witnessed through scanning electron microscopy. The enhanced thermo-mechanical performance was attributed to interfacial covalent interactions engendered by ring opening reaction between epoxy and amine moieties of PAM dendrimers. These multiscale composites with extraordinary functional properties can outperform conventional counterparts with improved reliability and performance.     

Receptance coupling for end mills

Identification of chatter free cutting conditions, the chatter stability lobes, requires a measurement of the frequency response function (FRF) of each tool mounted on the spindle. This paper presents a method of assembling known dynamics of the spindle–tool holder with an analytically modeled end mill using the receptance coupling technique. The classical receptance technique is enhanced by proposing a method of identifying the end mill–spindle/tool holder joint dynamics, which include both translational and rotational degrees of freedom. The method requires measurement of FRFs with impact tests applied on the spindle–tool holder assembly and blank calibration cylinders attached to the spindle. The spindle and tool holder characteristics are completely identified from the two experiments, and used for the mathematical prediction of FRF for end mills with arbitrary dimensions. The proposed method is experimentally proven and verified in cutting tests.