Evaluation of peanut husk as a novel,low cost biosorbent for the removal of Indosol Orange RSN dye from aqueous solutions: batch and fixed bed studies

The feasibility of using peanut husk biomass for the removal of Indosol Orange RSN dye was explored during this study. Batch experiments were conducted with native, polyethyleneimine (PEI) treated and Na-alginate immobilized biomass. Different important process parameters like pH, contact time, biosorbent dose, initial dye concentration, and temperature were optimized during batch study. Low pH and low biosorbent dose were found to be the feasible conditions for the maximum biosorption of dye. PEI-treated biomass exhibited maximum biosorption capacity (79.5 mg g^?1) for Indosol Orange RSN dye. Pseudo-second-order equation generated the best agreement with experimental data. Different equilibrium isotherm models were applied to the experimental data. Langmuir adsorption isotherm model showed better fitness to the experimental results. Biosorption process was found to be exothermic in nature and thermodynamic study was carried out to check out the feasibility of process. Continuous mode study was performed with native peanut husk biomass to optimize the bed height, flow rate, and initial dye concentration for maximum dye removal. The results indicate that maximum dye removal (8.8 mg L^?1) was obtained with 3 cm bed height and 1.8 mL min^?1 flow rate by using 70 mg L^?1 initial dye concentration. Characterization of biosorbent was carried out by determination of point of zero charge, scanning electron microscopy, and Fourier transform infrared spectroscopy. The findings revealed that peanut husk biomass has a high biosorption potential, and it can be exploited for the treatment of dye containing waste water.     

Esophageal atresia and tracheoesophageal fistula: success and failure rates in the United Arab Emirates

Randomized, prospective trials examining the effectiveness of carotid endarterectomy have given distinct information into the mechanisms and prevention of embolic strokes. The North American Symptomatic Carotid Endarterectomy Trial (NASCET) and the Asymptomatic Carotid Atherosclerosis Study (ACAS) have demonstrated the benefits of carotid endarterectomy for patients who meet the precise selection criteria and are treated according to established study protocols. The existing challenge to clinicians lies in the application of trial results to the individual patient.     

SAPO-34 supported Pt–Sn-based novel catalyst for propane dehydrogenation to propylene

The Pt–Sn-based catalyst was intensified using SAPO-34 as support for direct propane dehydrogenation to propylene. The catalyst was prepared by sequential impregnation method and characterized by XRF, BET, XRD, NH₃-IR, NH₃-TPD, H₂-TPR, HR-TEM and O₂-pulse coke analysis. NH₃-TPD, IR spectra and XRD results suggested that the doping of metals on SAPO-34 did not affect its acidic strength and structural topology of support, respectively. Propylene selectivity of 94% and total olefins selectivity greater than 97% was achieved using Pt–Sn/SAPO-34. The results were compared with Pt–Sn/ZSM-5 under identical conditions. The possible reasons for improvement were the larger surface area, shape selectivity and particular by suitable acidity of SAPO-34.     

Evaluation of process parameter space of bulk FinFETs using 3D TCAD

Using full 3D TCAD, an evaluation of process parameter space of bulk FinFET is presented from the point of view of DRAM, SRAM and I/O applications. Process and device simulations are performed with varying uniform fin doping, anti-punch implant dose and energy, fin width, fin height and gate oxide thickness. Bulk FinFET architecture with anti-punch implant is introduced beneath the channel region to reduce the punch-through and junction leakage. For 30 nm bulk FinFET, anti-punch implant with low energy of 15 to 25 keV and dose of 5.0 × 10¹³ to 1.0 × 10¹⁴ cm⁻² is beneficial to effectively suppress the punch-through leakage with reduced GIDL and short channel effects. Our simulations show that bulk FinFETs are approximately independent of back bias effect. With identical fin geometry, bulk FinFETs with anti-punch implant show same I_ON-I_OFF behavior and approximately equal short channel effects like SOI FinFETs.     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

Exploring Regional Profile of Drought History- a New Procedure to Characterize and Evaluate Multi-Scaler Drought Indices Under Spatial Poisson Log-Normal Model

Water Resources Management - Drought is recurrently occurring in many parts of the globe. In contrast to other natural hazards, drought has complex climatic characteristics. Several environmental...