Soluble soybean polysaccharide/TiO2 nanocomposites: Biological activity,release behavior,biodegradability, and biosafety

This study aimed to produce and characterize eco-friendly SSPS nanocomposites incorporated with various concentrations of TiO₂ nanoparticles (NPs) (1%, 3%, and 7%). The antimicrobial activity of the nanocomposite films against five strains of pathogenic bacteria was examined. Salmonella typhi PTCC 1609 was the most sensitive species to TiO₂ NPs at concentrations equal to the synthetic antibiotic. The migration of TiO₂ to ethanol and acetic acid, as two food simulants increased when the initial nano-TiO₂ content increased. The release profiles for TiO₂ in two simulants of ethanol and acetic acid indicated a non-Fickian release, and the release kinetics were concentration-dependent. SSPS/TiO₂ nanocomposites degraded easily and thus have the potential to be applied as an eco-friendly packaging system. Oral administration of doses of 1, 12.5, 25, 50, and 75 mg/kg TiO₂ revealed that the dose of 50 and 75 mg/kg increased malondialdehyde (p < .001) concentration in the liver tissue. In addition, it decreased glutathione (p < .001) concentration in the liver tissue.     

Simultaneous determination of Sunset yellow and Tartrazine in soft drinks using gold nanoparticles carbon paste electrode

The monitoring of synthetic dyes in foods is very important due to their potential harmfulness to human beings. Herein, a carbon-paste electrode (CPE) that is chemically modified with gold nanoparticles (nAu) was fabricated and used for the determination of Sunset yellow (SY) and Tartrazine (Tz). Cyclic and differential pulse voltammetry (CV and DPV) results revealed two well-resolved anodic peaks for SY and Tz with remarkably increase in oxidation signals of these colourants. Based on this, a novel electrochemical method was developed for the simultaneous determination of SY and Tz. High sensitivity and selectivity, sub-micromolar detection limit, high reproducibility and regeneration of the electrode surface by simple polishing make the nAu-CPE electrode very suitable for the determination of SY and Tz in commercially available soft drinks. The detection limits was 3.0 × 10⁻⁸ and 2.0 × 10⁻⁹ mol l⁻¹ for SY and Tz, respectively, which are remarkably lower than those reported previously for SY and Tz using other modified electrodes.     

Ohmic‐assisted hydrodistillation of essential oils from Zataria multiflora Boiss (Shirazi thyme)

Ohmic‐assisted hydrodistillation (OAHD) is a combination of ohmic heating and distillation, and could be considered as a novel method for the extraction of essential oils. Major problems with traditional methods are long extraction time and lower purity of the extract. In this study, OAHD was applied as an economic and green technology for the extraction of essential oils from Zataria multiflora Boiss. (Shirazi thyme) aerial parts and the results were compared to those obtained from hydrodistillation (HD) as a conventional method. The results showed that OAHD method had the extraction time of 32.21 ± 2.59 min while this value was about 57.21 ± 2.33 min for hydrodistillation (HD). Scanning electron micrographs of thyme leaves showed a sudden eruption of essential oil glands and their surrounding area for OAHD samples. GC–MS analysis indicated that both methods of OAHD and HD can extract the same compounds.     

Effects of L-Cysteine on some characteristics of wheat starch

In this study the effects of L-Cysteine as a food additive on wheat starch characteristics before and after gelatinization were studied. L-Cysteine (63 mg/kg, starch basis) was added to slurry of wheat starch in water (30%, w/w). One set of samples was prepared by mixing it at 40 °C for 45 min. Another set was gelatinized at 100 °C for 45 min. The scanning electro-micrographs of the samples prepared at 40 °C in the presence of L-Cysteine showed some spots on the granules. However, thermal properties, X-ray patterns and the degree of crystallinity of the samples did not obviously change (P > 0.05); while a reduction in intrinsic viscosity, peak and final viscosities of the samples was observed. After gelatinization, intrinsic, peak and final viscosities of the samples were reduced. Some of these changes may indicate degradation of starch molecules in the presence of L-Cysteine, particularly after gelatinization.     

Improved physical stability of docosahexaenoic acid and eicosapentaenoic acid encapsulated using nanoliposome containing α‐tocopherol

This study aimed to develop a nanoliposomal formulation containing α‐tocopherol loaded with eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) and to characterise the formulation by its physical stability. For this purpose, different nanoliposomal formulations with dipalmitoyl phosphocholine were prepared using a modified thin‐film hydration method and evaluated by particle size, polydispersity index (PDI), transmission electron microscopy, differential scanning calorimetry and determining the encapsulation efficiencies of DHA and EPA. A physical stability study was conducted by investigating the change in the vesicle encapsulation efficiency, particle size, PDI and shape when stored at 4, 30 and 40 °C for 3 months. High encapsulation efficiency of DHA and EPA (89.1% ± 0.6% and 81.9% ± 1.4%) and appropriate particle size (82 ± 0.8 nm) were obtained for liposomes composed of α‐tocopherol. The optimum formulation was stable for 90 days when kept at 4 °C. This study demonstrated that α‐tocopherol had a protective effect on the physical stability of the nanoliposomes containing DHA and EPA.     

Electron back-scattered diffraction and nanoindentation analysis of nanostructured Al tubes processed by multipass tubular-channel angular pressing

Microstructural evolution and mechanical properties of nanostructured 1060 aluminum alloy tubes processed by tubular-channel angular pressing (TCAP) process were investigated using electron back-scattered diffraction (EBSD), transmission electron microscopy (TEM) and nanoindentation analyzes. EBSD scans revealed a homogeneous ultrafine grained microstructure after the third passes of the TCAP process. Apart from that the mean grain sizes of the TCAP processed tubes were refined to 566 nm, 500 nm and 480 nm respectively after the first, second and third passes. The results showed that after the three TCAP passes, the grain boundaries with a high angle comprised 78% of all the boundaries. This is in comparison to the first pass processed sample that includes approximately 20% HAGBs. The TEM inspection afforded an appreciation of the role of very low-angle misorientation boundaries in the process of refining microstructure. Nanoindentation results showed that hardness was the smallest form of an unprocessed sample while the largest form of the processed sample after the three passes of TCAP indicated the highest resistant of the material. In addition, the module of elasticity of the TCAP processed samples was greater from that of the unprocessed sample.     

An improved mechanism for capacity payment based on system dynamics modeling for investment planning in competitive electricity environment

Many countries have experienced restructuring in their electric utilities. This restructuring has presented the power industries with new challenges, the most important of which is long-term investment planning under uncertain conditions. This paper presents an improved mechanism for capacity payment. The mechanism has been investigated based on system dynamic modeling. In our proposed mechanism, generators will recover a part of their investment through capacity payment. While the payment for any plant remains constant during the operation period, it depends on the investment needed to build it. The main factors affecting long-term planning have been considered in our model. The approach can be used to investigate the effects of fixed as well as variable capacity payment in market investment. We used the probability density function of load as a new concept to calculate average market price. Delays in unit constructions, estimation of demand, and market capacity growth during construction periods have been included in the proposed algorithm as parameters, which affect the regulator's decision for changing capacity payment. The model can be used by regulators to investigate strategies that may affect the fluctuations in the market.     

基于耗散函数的叶顶泄漏流动非定常数值模拟

更进一步的改善间隙泄漏流动需要对其复杂的流动结构作深入的认识，若不能给出间隙泄漏流动影响更真实的表述将导致对其研究无法进行。为了更深入的认识涡轮叶栅流动粘性耗散的细节及分布，作者采用商用N-S求解器对具有动叶顶部间隙的涡轮级非定常流场进行了数值模拟和研究。本文引入耗散函数对间隙泄漏流动的粘性耗散进行评估，这种方法是对粘性影响带来的粘性耗散的最简单也是最直接模拟和计算方法。     

Environmental sustainability assessment of buildings in hot climates: the case of the UAE

Sustainability has acquired great importance due to the negative impact of various developments on the environment. The rapid growth during the last decade has been accompanied by active construction which, in some instances, neglected the impact on the environment and human activities. The impact of developments on the traditional heritage has not been taken into consideration although the latter represents a rich resource for sustainable building practices. The study aims at examining these developments in the UAE using an assessment tool that measures the performance of buildings in terms of their sustainability. This study attempts to: (a) develop a comprehensive definition of sustainability to suit UAE needs; (b) classify sustainable building practices at international and regional levels; (c) assess building performance in the UAE; and (d) establish guidelines for future sustainable architecture. T-Sol software was used to predict the CO₂ emission level in selected buildings in the UAE. Results illustrate that average energy use/area in domestic buildings is high (213 kWh/m²) and public buildings showed less sustainable measures in terms of energy features, energy performance and environmental features. Issues considered in the assessment of buildings such as energy use per square metre and CO₂ emission are alarming. Traditional buildings in the UAE were more sustainable than contemporary buildings, however.