Improvement of Grain Size and Dome Height of Microalloyed Steels Using Taguchi Method Based on Grey Relational Grade in Controlled Rolling

An efficient approach was introduced for improving the condition of major controlled rolling process parameters of roughing, finishing and coiling temperatures and optimizing these parameters to obtain minimum grain size and maximum dome height simultaneously. Taguchi method combined with grey relational analysis was applied to achieve optimum grain size and dome height during controlled rolling process. For this purpose, four levels for the above temperatures were chosen and sixteen experiments were conducted based on orthogonal array of Taguchi method. Based on Taguchi approach, signal-to-noise (S/N) ratios were calculated and used in order to obtain the optimum levels for every input parameter. Analysis of variance revealed that finishing and coiling temperatures have the maximum effect on the grain size and dome height of microalloyed steels. The confirmation tests with the optimal levels of parameters indicated that the grain size and dome height of controlled rolled microalloyed steels can be improved effectively through this approach.     

Thermogravimetric analysis and kinetic study of heavy oil pyrolysis

Pyrolysis, so-called devolatilization, is one of the first steps of all thermochemical processes occurring in an inert atmosphere. The authors discuss the main kinetic features of heavy oil pyrolysis, on the basis of the data derived m from a TGA analysis and by using a kinetic model. The samples were heated over a range of temperature from 400 K to 430°C at various heating rates between 10 and 80°C/min. Experimental results showed that the effect of time is considerable in the case of tar conversion, compared to char and gases.     

Intelligent energy management of a fuel cell vehicle based on traffic condition recognition

Clean Technologies and Environmental Policy - This paper presents a methodological approach for intelligent control of fuel cell vehicles based on traffic condition recognition. For this purpose,...     

Generalized Gabor filters for palmprint recognition

Orientation-based coding approaches have recently been widely employed for face and palmprint recognition where generally, one starts with a set of Gabor filters to extract orientation information and then proceeds to code dominant orientations as features for each point of the palmprint. However, as the Gabor filter is developed to model two-dimensional receptive fields of simple cells in straits cortex, it might not be our best choice when dealing with curved and complex structures inherent in the palmprint texture. Motivated by this intuition, this paper shows that Gabor filters are a subset of a bigger family of filters which we refer to as generalized Gabor filter (GGF). Depending on the values of its parameters, a GGF takes a rather diverse shapes and orientations, which results in a potentially finer feature extraction capability. We show this improved capability by employing GGFs in the palmprint verification process. In applying our method, two different sub-banks of GGFs are defined for the orientation-based feature extraction of palmprints, and when compared with Gabor filters, it will be shown that GGFs have the upper hand in capturing orientation features. Furthermore, compared with the competitive code—one of the well-known orientation-based coding methods—the number of employed orientations is reduced to half. This would automatically compensate for a double usage of the filter banks, which otherwise could increase the time complexity of using GGFs. These ideas are further elaborated using a set of experiments on PolyU II and PolyU 2D/3D palmprint databases. The results show the preeminence of using GGFs both in terms of accuracy and efficiency.     

Experimental characterization of the small strain shear modulus of soft clay stabilized with cement and nano-SiO2 using bender element tests

Bulletin of Engineering Geology and the Environment - The accurate and efficient modification of the static and dynamic properties of problematic soils is a primary concern in geotechnical...     

Improved physical stability of docosahexaenoic acid and eicosapentaenoic acid encapsulated using nanoliposome containing α‐tocopherol

This study aimed to develop a nanoliposomal formulation containing α‐tocopherol loaded with eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) and to characterise the formulation by its physical stability. For this purpose, different nanoliposomal formulations with dipalmitoyl phosphocholine were prepared using a modified thin‐film hydration method and evaluated by particle size, polydispersity index (PDI), transmission electron microscopy, differential scanning calorimetry and determining the encapsulation efficiencies of DHA and EPA. A physical stability study was conducted by investigating the change in the vesicle encapsulation efficiency, particle size, PDI and shape when stored at 4, 30 and 40 °C for 3 months. High encapsulation efficiency of DHA and EPA (89.1% ± 0.6% and 81.9% ± 1.4%) and appropriate particle size (82 ± 0.8 nm) were obtained for liposomes composed of α‐tocopherol. The optimum formulation was stable for 90 days when kept at 4 °C. This study demonstrated that α‐tocopherol had a protective effect on the physical stability of the nanoliposomes containing DHA and EPA.     

A new compact circuit-level model of semiconductor lasers: investigation of relative intensity noise and frequency noise spectra

We introduce a new compact noise equivalent circuit model of semiconductor lasers (SLs) from the rate equation including Langevin noise sources. The noise sources are described in terms of the spectral properties of the relative intensity noise (RIN) and frequency/phase noise (FN). Unlike the previous noise equivalent circuit models, which are based on two different DC and small-signal circuit models, using only a single circuit model, the static and dynamic responses and also the noise characteristics of SLs, can be investigated. We examine the validity of the presented noise circuit model by comparing the simulated results with the analytical and numerical results available in the literatures.     

Thermal Analysis of Non-linear Convective–Radiative Hyperbolic Lumped Systems with Simultaneous Variation of Temperature-Dependent Specific Heat and Surface Emissivity by MsDTM and BPES

With the advent of temperatures near absolute zero, it is often claimed that at very low temperatures the effect of thermal wave propagation must be included by the hyperbolic heat conduction equation (HHCE). In this paper the non-linear convective–radiative HHCE is investigated. Opposite to common numerical analyses, analytical expressions are obtained for the temperature variations by the multi-step differential transformation method. Some conclusions about alteration of the specific heat of the material, temperature steeping, and Vernotte number have been formulated.