Association between antiinflammatory cytokine,IL‐10, and sleep quality in patients on maintenance hemodialysis

Elevated proinflammatory cytokines have been attributed to poor sleep quality in patients receiving hemodialysis. This is the first investigation about the relationship between sleep quality and circulating levels of antiinflammatory markers in these patients. A total of 72 patients who were receiving maintenance hemodialysis were enrolled in this cross‐sectional study. The Pittsburgh Sleep Quality Index (PSQI) was used to measure sleep quality. Patients were divided into two groups: good sleepers (PSQI score < 5) and poor sleepers (PSQI score ≥ 5). Assessments were made for serum biochemical parameters (albumin, parathyroid hormone), inflammatory (interleukin [IL]‐6, tumor necrosis factor‐alpha [TNF‐α], and high‐sensitivity c‐reactive protein [hs‐CRP] ) and antiinflammatory (IL‐10) markers. Fifty‐four patients (75%) were classified as poor sleepers. Poor sleepers showed significantly lower levels of serum IL‐10 and higher serum triglyceride and parathyroid hormone concentrations. These patients were more likely to have more comorbidities. The global PSQI score was significantly correlated with serum IL‐10 (p = 0.03) and triglyceride levels (p = 0.01). Multivariate logistic regression analysis showed a direct correlation between PSQI and having comorbidities (p = 0.011, odds ratio [OR] = 3.918; confidence interval 95% [CI] = 2.742–19.031), between PSQI and serum triglyceride (p = 0.027, OR = 1.027 [95% CI = 1.007–1.048] ), and an inverse correlation between PSQI and serum IL‐10 level (p = 0.021, OR = 0.424 [95% CI = 0.195–0.922]). Reduced circulating levels of the antiinflammatory cytokine IL‐10 were significantly associated with poor sleep quality in hemodialysis patients. Factors including serum IL‐10 and triglyceride concentrations and having comorbidities may predict patients prone to poor sleep quality.     

A planar micro-concentrator/injector for low power consumption microchromatographic analysis of benzene and 1,3 butadiene

In the present study, we present the first steps of the development of a low power consumption GC microsystem for the analysis of benzene in the presence of butadiene, involved in petrochemical industrial applications. This system is made by coupling a low power consumption planar microhotplate based on a preconcentrator with good preconcentration capability and a spiral microchromatographic column that presents a separation capability of both compounds at room temperature, when tested in front of a gas sensor. The first characterization results of the device showed a successful injection of benzene and butadiene when placed in front of the micro-separation module.     

通过双级固溶热处理制备新型高强Al−10.5Si−3.4Cu−0.2Mg合金

通过析出硬化提高Al?Si?Cu合金的力学性能.这些合金对时效硬化的反应非常缓慢.为了解决这一问题,在Al?10.5Si?3.4Cu合金中分别加入0.2％、0.4％和0.7％(质量分数)的镁.该新型合金在固溶处理阶段经过两种不同的析出硬化过程.结果表明,添加不同含量的镁可加速该合金对时效处理的响应,提高其硬度和强度.双...     

Distributed algorithms for barrier coverage using relocatable sensors

We study the barrier coverage problem using relocatable sensor nodes. We assume each sensor can sense an intruder or event inside its sensing range. Sensors are initially located at arbitrary positions on the barrier and can move along the barrier. The goal is to find final positions for sensors so that the entire barrier is covered. In recent years, the problem has been studied extensively in the centralized setting. In this paper, we study a barrier coverage problem in the distributed and discrete setting. We assume that we have n identical sensors located at grid positions on the barrier, and that each sensor repeatedly executes a Look-Compute-Move cycle: based on what it sees in its vicinity, it makes a decision on where to move, and moves to its next position. We make two strong but realistic restrictions on the capabilities of sensors: they have a constant visibility range and can move only a constant distance in every cycle. In this model, we give the first two distributed algorithms that achieve barrier coverage for a line segment barrier when there are enough nodes in the network to cover the entire barrier. Our algorithms are synchronous, and local in the sense that sensors make their decisions independently based only on what they see within their constant visibility range. One of our algorithms is oblivious whereas the other uses two bits of memory at each sensor to store the type of move made in the previous step. We show that our oblivious algorithm terminates within \(\varTheta (n^2)\) steps with the barrier fully covered, while the constant-memory algorithm is shown to take \(\varTheta (n)\) steps to terminate in the worst case. Since any algorithm in which a sensor can only move a constant distance in one step requires \(\varOmega (n)\) steps on some inputs, our second algorithm is asymptotically optimal.     

Insight into the Impact of Oxidative Stress on the Barrier Properties of Lipid Bilayer Models

As a new field of oxidative stress-based therapy, cold physical plasma is a promising tool for several biomedical applications due to its potential to create a broad diversity of reactive oxygen and nitrogen species (RONS). Although proposed, the impact of plasma-derived RONS on the cell membrane lipids and properties is not fully understood. For this purpose, the changes in the lipid bilayer functionality under oxidative stress generated by an argon plasma jet (kINPen) were investigated by electrochemical techniques. In addition, liquid chromatography-tandem mass spectrometry was employed to analyze the plasma-induced modifications on the model lipids. Various asymmetric bilayers mimicking the structure and properties of the erythrocyte cell membrane were transferred onto a gold electrode surface by Langmuir-Blodgett/Langmuir-Schaefer deposition techniques. A strong impact of cholesterol on membrane permeabilization by plasma-derived species was revealed. Moreover, the maintenance of the barrier properties is influenced by the chemical composition of the head group. Mainly the head group size and its hydrogen bonding capacities are relevant, and phosphatidylcholines are significantly more susceptible than phosphatidylserines and other lipid classes, underlining the high relevance of this lipid class in membrane dynamics and cell physiology.     

Multi-criteria expertness based cooperative Q-learning

One of the most influential points in cooperative learning is the type of exchanging information. If the content of exchanging information among agents is rich, cooperation gives rise to better results. To extract proper knowledge of agents during the cooperation process, some expertness measures that assign expertness levels to the other agents are used. In this paper, a new method named Multi-Criteria Expertness based cooperative Q-learning (MCE) is proposed that utilizes all of the expertness measures and attempts to enrich the exchanging information more efficiently. In MCE, all expertness measures are considered simultaneously and collective knowledge is equal to the combination of learned knowledge by each of expertness measures. The experimental results confirm outstanding performance of the proposed method on a sample maze world and a hunter-prey problem.     

A primary unit commitment approach with a modification process

This paper introduces an approach to one of the most important problems in electrical power system called the Unit Commitment (UC). The proposed method PUC-MP which stands for the primary unit commitment-modification process, addresses this problem firstly by using a simple and new priority for operating the generating units in each hour, and then, using a modification process which enhances the solution quality with lower cost. The PUC-MP takes advantage of both deterministic and stochastic algorithms in its structure to solve the discrete-variable part of the UC problem for choosing a suitable combination of units in each hour, and also, continuous-variable part of it which is dispatching the operating units’ output power to the power network load economically. The latter part which is called economic dispatch (ED) has been solved using an intelligent algorithm which in turn has been customized by two new ideas to increase its efficiency. Simulation results show that this new approach even without using its modification process can be considered as an effective approach which surpasses some other popular and recently reported methods in producing near-optimal and robust solutions.     

Improvement in corrosion resistance of commercial pure titanium for the enhancement of its biocompatibility

A new surface modification protocol encompassing an anodization treatment has been developed to improve the surface properties of biomedical titanium. Anodization in presence of nickel sulfate is one of a good way to improve the resistance of commercial pure titanium (cp‐Ti) in phosphate saline buffer solution (PSB). The potentiostatic behavior of anodized titanium in sulfuric acid with nickel sulfate differed markedly from that of titanium anodized in sulfuric acid free from nickel sulfate. Polarization and electrochemical impedance spectroscopy (EIS) recorded an increase in the corrosion resistance of the passive film. Scanning electron microscopy (SEM) and energy diffraction X‐ray (EDX) analysis were used to investigate the morphology and structure of the anodized film in absence and in presence of nickel sulfate. On the other hand, sealed anodized titanium samples exposed to PSB for up to 3 days have been studied by EIS to obtain detailed information concerning the electrochemical properties of sealed anodized titanium. An equivalent circuit that reproduces the impedance results of porous cp‐Ti oxide (TiO₂) films is proposed. These observations indicate that anodization of cp‐Ti in presence of nickel sulfate and sealing the anodized film can serve as a simple low‐temperature method to enhance the corrosion resistance of cp‐Ti when used as an implant material.     

Improving the quality of surface in the polishing process with the magnetic abrasive powder polishing using a high-frequency induction heating source on CNC table

In this research, polishing flat surfaces has been done by using a completely new and innovative method. In this method, rotary magnetic tool that carry magnetic abrasive powders, is placed in a very strong thermal induction field, and magnetic rotary tool frequently change its direction from clockwise (CW) to counterclockwise (CCW) and CCW to CW. The frequency of changing rotation direction is an important parameter of this innovation method. The intended pieces for polishing operations have been placed on a synchronic two-axis Cartesian CNC table, and the gap between rotary magnetic tool and the sheet surface can be controlled by a power transmission screw operating in the direction of the vertical axis. Several experiments have proved high performance of the new proposed method in the process of polishing.     

Spontaneous Formation of Liquid Crystals in Ultralarge Graphene Oxide Dispersions

A novel process is developed to synthesize graphene oxide sheets with an ultralarge size based on a solution‐phase method involving pre‐exfoliation of graphite flakes. Spontaneous formation of lyotropic nematic liquid crystals is identified upon the addition of the ultralarge graphene oxide sheets in water above a critical concentration of about 0.1 wt%. It is the lowest filler content ever reported for the formation of liquid crystals from any colloid, arising mainly from the ultrahigh aspect ratio of the graphene oxide sheets of over 30 000. It is proposed that the self‐assembled brick‐like graphene oxide nanostructure can be applied in many areas, such as energy‐storage devices and nanocomposites with a high degree of orientation.