Using Taguchi method to determine optimum process conditions for flue gas desulfurization through an amine scrubber

This study was done to determine the optimum process conditions for absorption of sulfur dioxide in a mixture of flue gases. Using a selective amine-based absorber; a high amount of SO₂ was absorbed in the scrubbing process. The process was designed to reduce the amount of sulfur dioxide. The pilot plant was designed and set up in the Research Center of Petroleum University of Technology, containing absorption and desorption stages. This paper reports an investigation of the effect and optimization of parameters that improve the efficiency of the whole process. The experiments were conducted under varying levels of desorption temperature, pH of the absorber solution, concentration of SO₂ inlet gas, and flow rate of the absorbing solution. Using Taguchi experimental design method, the optimum conditions were identified for the absorption process. An efficiency of more than 99 % could be obtained by varying the parameters in which all the released SO₂ gas was absorbed from the inlet flue gas; an achievement that is much favorable for industrial purposes.     

Prediction of geological hazardous zones in front of a tunnel face using TSP-203 and artificial neural networks

This research aims at improving the methods of prediction of hazardous geotechnical structures in the front of a tunnel face. We propose and showcase our methodology using a case study on a water supply system in Cheshmeh Roozieh, Iran. Geotechnical investigations had previously reported three measurements of the newly established method of TSP-203 (Tunnel Seismic Prediction) along 684 m of the 3200 m long tunnel up to a depth of 600 m. We use the results of TSP-203 in a trained artificial neural network (ANN) to estimate the unknown nonlinear relationships between TSP-203 results and those obtained by the methods of Rock Mass Rating classification (RMR – treated here as real values). Our results show that an appropriately trained neural network can reliably predict the weak geological zones in front of a tunnel face accurately.     

Development of an efficient stabiliser mixture for physical stability of nonfat unfizzy doogh

The effects of locust bean, carboxymethyl cellulose, a mixture of locust bean and carboxymethyl cellulose and Persian gum on different properties of nonfat doogh were studied over a period of 28 days. The results showed that samples containing a mixture of locust bean and carboxymethyl cellulose had the highest stability. Furthermore, the rheological behaviour of the doogh changed from Newtonian to pseudoplastic. Better sensory acceptability was shown for the treatments containing a mixture of locust bean gum and carboxymethyl cellulose. In general, it was shown that a mixture of locust bean and carboxymethyl cellulose could be of practical use in the industrial production of nonfat doogh.     

Numerical simulation of direct methanol fuel cells using lattice Boltzmann method

In this study Lattice Boltzmann Method (LBM) as an alternative of conventional computational fluid dynamics method is used to simulate Direct Methanol Fuel Cell (DMFC). A two dimensional lattice Boltzmann model with 9 velocities, D2Q9, is used to solve the problem. The computational domain includes all seven parts of DMFC: anode channel, catalyst and diffusion layers, membrane and cathode channel, catalyst and diffusion layers. The model has been used to predict the flow pattern and concentration fields of different species in both clear and porous channels to investigate cell performance. The results have been compared well with results in literature for flow in porous and clear channels and cell polarization curves of the DMFC at different flow speeds and feed methanol concentrations.     

Prioritizing of wind farm locations for hydrogen production: A case study

Many advantages of renewable energies, especially wind energy, such as abundance, permanence, and lack of pollution has encouraged many industrialized and developing countries to focus more on these clean and economic sources of energy. Identifying a good location that is suitable for the construction of a wind farm is one of the important initial steps in harnessing wind energy which is assessed this study. The purpose of this study is to prioritize and rank 13 cities of Fars province in Iran, in terms of their suitability for the construction of a wind farm. Six important criteria were used to prioritize and rank the cities. Wind power density is the most important criterion among these criteria which is calculated by obtaining the 3-h wind speed data between 2004 and 2013. DEA (Data Envelopment Analysis) method is used for prioritizing and ranking cities, and then AHP (Analytical Hierarchy Process), and FTOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) methods are used to assess the validity of results. It is concluded that Izadkhast city is the suggested location for the construction of wind farm. The utilizing a wind-hydrogen energy conversion system will result in a substantial amount of hydrogen production (averagely 21.9 ton/year) when a 900 kW wind turbine is installed in this location.     

Environmental damage costs in Iran by the energy sector

On the basis of the energy supply and demand, this paper assesses the environmental damage from air pollution in Iran using the Extern-E study that has extended over 10 years and is still in progress in the European Union (EU) commission. Damage costs were transferred from Western European practice to the conditions of Iran by scaling according to GDP per capital measured in PPP terms.     

Electrode and electrolyte materials for electrochemical capacitors

Among different electric energy storage technologies electrochemical capacitors are used for energy storage applications when high power delivery or uptake is needed. Their energy and power densities, durability and efficiency are influenced by electrode and electrolyte materials however due to a high cost/performance ratio; their widespread use in energy storage systems has not been attained yet.Thanks to their properties such as high surface area, controllable pore size, low electrical resistance, good polarizability and inertness; activated carbons derived from polymeric precursors are the most used electrode materials in electrochemical capacitors at present. Other electrode materials such as shaped nano-carbons or metal oxides are also investigated as electrode materials in electrochemical capacitors, but only as useful research tools.Most commercially used electrochemical capacitors employ organic electrolytes when offering concomitant high energy and high power densities. The use of aqueous based electrolytes in electrochemical capacitor applications is mainly limited to research purposes as a result of their narrow operating voltage. Recent studies on room temperature ionic liquids to be employed as electrolyte for electrochemical capacitor applications are focused on fine tuning their physical and transport properties in order to bring the energy density of the device closer to that of batteries without compromising the power densities.In this paper a performance analysis, recent progress and the direction of future developments of various types of materials used in the fabrication of electrodes for electrochemical capacitors are presented. The influence of different types of electrolytes on the performance of electrochemical capacitors such as their output voltage and energy/power densities is also discussed.     

Lessons from metal oxides to find why Nature selected manganese and calcium for water oxidation

The problem of finding a way to store energy from abundant sources such as sunlight, wind or geothermal heat is critical. Water splitting toward hydrogen production is a very promising way for the goal. Although the cathodic reaction is of major interest in hydrogen production, the concurrent anodic water oxidation, which provides cheap electrons for the cathodic reaction, is a limitation for hydrogen formation. The best water-oxidizing catalyst was found by Nature million years ago and used in plants, algae and cyanobacteria. We believe learning from the natural system is very promising, because Nature has been successfully splitting water for millions of years, using an inexpensive and environmentally friendly MnCa oxido cluster. Herein we study the phenol oxidation by some nano-sized metal oxides in the presence of H₂O₂. As metal oxides are functional and structural models for the water-oxidizing complex in Photosystem II, the results can be expanded for the natural site. We suggest that low organic compound oxidation under water oxidation is an important issue to select manganese and calcium ions for water oxidation.     

Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit

Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively.