Hard- and soft-modeling approaches for resolution of complex formation of Co2+ and Ni2+ with glycine

Principal component analysis (PCA) was used to obtain information about the number of components in the complex formation equilibria of Co(2+) and Ni(2+) with glycine (Gly). In order to obtain a clearer insight into these complex formation systems, multivariate curve resolution-alternating least squares (MCR-ALS) was used. Using MCR-ALS as a soft-modeling method, well-defined concentration and spectral profiles were obtained under unimodality, non-negativity, and closure constraints. Based on the obtained results, an equilibrium model was proposed and subsequently, a hard-modeling method was used to resolve the complex formation equilibria completely. Due to the presence of multiple equilibria, the resolution of such systems is very difficult. The Co-Gly system was best described by a model consisting of M(GlyH), M(Gly), M(Gly)(2), M(Gly)(2)H, and M(Gly)(3) (M = Co(2+)) with the overall stability constants determined to be 7.10 ± 0.011, 5.14 ± 0.006, 9.28 ± 0.009, 13.75 ± 0.016, and 11.10 ± 0.010, respectively. On the other hand, the system of Ni-Gly was best fitted by a model containing M(GlyH), M(Gly), M(Gly)(2), M(Gly)(3), and M(Gly)(2)(OH) (M = Ni(2+)) with overall stability constants of 10.95 ± 0.04, 6.41 ± 0.03, 11.31 ± 0.03, 15.39 ± 0.06, and 14.32 ± 0.02, respectively.     

Effect of Natural Extracted Antioxidants from Eriobotrya japonica (Lindl.) Fruit Skin on Thermo Oxidative Stability of Soybean Oil During Deep Frying

The effects of ultrasound-assisted, supercritical CO₂ and solvent extraction techniques on antioxidant activity of Eriobotrya japonica (Lindl.) skin extracts were investigated using 2, 2-diphenyl-1-picrylhydrazyl, β-carotene, and Rancimat assays. Solvent extract of skin at 400 ppm had the highest antioxidant activity. Solvent extraction was the most effective method on extraction of phenols and tocopherols. Protective effects of extracts in stabilization of soybean oil during frying were determined by measuring its peroxide value, total polar compounds, carbonyl value, free fatty acids, conjugated dienes, and trienes. Results indicated that solvent extract of skin at 400 ppm exhibited stronger antioxidant activity in oil than tertiary butylhydroquinone.     

Organic-inorganic nanocomposites of methylcellulose as a precursor of nanocrystalline ZnO layers

In this article, we present a sol-gel method to synthesize hybrid nanocomposite films of Zinc oxide (ZnO)/methylcellulose (MC) on microscope glass slides. The zinc/MC solutions were prepared, using different weight ratios of zinc acetate dihydrate to MC, in the presence of acetic acid. Fourier transform infrared spectroscopy (FTIR) investigation of the Zn sol/MC mixture showed coordinating interaction between zinc ions and MC. Thermal gravimetry analysis (TGA) results showed rapid decomposition of organic compounds in the composites at the temperature range of 200-450 degrees C. The UV-Vis spectroscopy was also utilized to identify ZnO nanoparticles in the MC matrix. The generation of ZnO nanoparticles in the MC matrix was then observed to proceed in situ through the annealing of the gel phase at 200 degrees C. Nanocrystalline films of ZnO/MC were subsequently obtained by the calcinations of ZnO/MC nanocomposites at 550 degrees C. The nanocomposite films were transparent in the visible light and showed a higher energy absorption edge compared with the bulk ZnO. Nanocrystallite sizes of ZnO particles were estimated from scanning electron microscopy (SEM) and the X-ray diffraction (XRD) investigations.     

Recent Advancements in Polythiophene-Based Materials and their Biomedical,Geno Sensor and DNA Detection

In this review, the unique properties of intrinsically conducting polymer (ICP) in biomedical engineering fields are summarized. Polythiophene and its valuable derivatives are known as potent materials that can broadly be applied in biosensors, DNA, and gene delivery applications. Moreover, this material plays a basic role in curing and promoting anti-HIV drugs. Some of the thiophene’s derivatives were chosen for different experiments and investigations to study their behavior and effects while binding with different materials and establishing new compounds. Many methods were considered for electrode coating and the conversion of thiophene to different monomers to improve their functions and to use them for a new generation of novel medical usages. It is believed that polythiophenes and their derivatives can be used in the future as a substitute for many old-fashioned ways of creating chemical biosensors polymeric materials and also drugs with lower side effects yet having a more effective response. It can be noted that syncing biochemistry with biomedical engineering will lead to a new generation of science, especially one that involves high-efficiency polymers. Therefore, since polythiophene can be customized with many derivatives, some of the novel combinations are covered in this review.     

Zero-power balancing a two-link robot manipulator for a predefined point-to-point task

Journal of Mechanical Science and Technology - In this paper, a new balancing approach called “zero-power balancing” (ZPB) method is presented for a two-link robot manipulator (TLRM)...     

Study on automatic control of arc gap in robotic TIG welding

This paper presents a method for automatic control of arc length in tungsten inert gas (TIG) welding process using the arc voltage. By using this method, the role of operator in arc length control is played by an automatic control system based on a predefined arc voltage value for any special welding operation. A dynamic model for feed-rate mechanism and the relation between variations of arc length and voltage are described in details. Using a proportional-integral controller, variations of arc length in welding path is compensated with an automatic feed-rate mechanism in a normal direction to the welding path. By keeping the voltage constant during the process, a stable weld with higher quality and better appearance is obtained specially in welding of uneven surfaces. Theoretical and practical investigations show that the suggested method is able to control the TIG welding process successfully. Test results show that an accurate weld is obtained without the interference of the operator, and by comparing the predefined values of arc voltage with what is practically obtained, the welding gap is automatically adjusted.     

Inverse radiation-conduction estimation of temperature-dependent emissivity using a combined method of genetic algorithmand conjugate gradient

The solution of an inverse, conduction-radiation problem in a two-dimensional rectangle is analyzed to determine the temperature-dependent emissivity at the boundary. The medium is gray, absorbing, emitting and isotropically scattering. The bounding surfaces are assumed to be opaque and diffuse. The inverse problem is solved by minimizing the performance function, which is expressed by the sum of square residuals between estimated and exact heat fluxes, using a combined method of genetic algorithm and conjugate gradient. The emissivity is assumed to be represented as a function of boundary temperature with unknown variables. Therefore, the inverse problem is treated by the estimation of these variables. Finally, four examples are presented to show the accuracy of the algorithm. The effect of the measurement errors on the accuracy of the inverse analysis is also investigated. Results show the algorithm can estimate the unknown emissivity when the measurement errors are neglected. Also it is found that increasing the measurement error decreases the accuracy of estimation of temperature-dependent emissivity.     

Fault diagnosis of an automobile cylinder head using low frequency vibrational data

This paper proposes a vibration-based fault-diagnosis method for mechanical parts. This method, after algorithm development, only requires a single inexpensive test to inspect the part which could take as short as half a second. The algorithm is developed in three major stages, (i) exciting specimens without or with known faults using a controlled force and recording acceleration of a single point for a short time (ii) finding a signature for each faulty specimen, using Fourier transform and statistical analysis. (iii) Developing a multi-layer perceptron, as a mathematical model, using the results of stage (ii). The elements of a part signature are the inputs to the model. The location (and possibly size and shape factor) of the fault is model output. Stage (i) can be performed experimentally or alternatively with a validated FEM, one experiment or simulation per specimen. The proposed technique was examined to locate (isolate) a fault on an automobile cylinder head. The presented accuracy is considerable, and the data collected at fairly low frequency range (below 1200 Hz) were found to be sufficient for this technique. In the case study of this paper, possible fault locations are on a line; as a result, fault location has one dimension. It is shown that the technique can be extended to higher dimensions.     

Three-dimensional free vibration of variable thickness thick circular and annular isotropic and functionally graded plates on Pasternak foundation

This paper describes a study of three-dimensional free vibration analysis of thick circular and annular isotropic and functionally graded (FG) plates with variable thickness along the radial direction, resting on Pasternak foundation. The formulation is based on the linear, small strain and exact elasticity theory. Plates with different boundary conditions are considered and the material properties of the FG plate are assumed to vary continuously through the thickness according to power law. The kinematic and the potential energy of the plate-foundation system are formulated and the polynomial-Ritz method is used to solve the eigenvalue problem. Convergence and comparison studies are done to demonstrate the correctness and accuracy of the present method. With respect to geometric parameters, elastic coefficients of foundation and different boundary conditions some new results are reported which may be used as benchmark solutions for future researches.     

Natural Rubber Bearing Incorporated with Steel Ring Damper (NRB-SRD)

The present paper is aimed to investigate the behavior of Natural Rubber Bearing incorporated with steel ring damper (NRB-SRD). These types of dampers are integrated of several steel rings which are considered with two configurations namely, continual steel ring damper and separate steel ring damper and are inserted between top and bottom plates. The performance characteristics of the system such as effective horizontal stiffness, energy dissipation, equivalent viscous damping and residual deformation are calculated and then compared with the results of high damping rubber bearings and also shape memory alloy (SMA)-lead core rubber bearing (SMA-LRB). The results show that the energy dissipation in steel rings are mainly based on plastic deformation due to flexural behavior of the rings. NRB-SRD shows better performance in energy dissipation comparing to SMA-LRB and HDRB. These additional dampers show higher stability and energy dissipation in low shear strains due to developing of link between structure and substructure having desirable initial stiffness under weak earthquakes and wind loads and also in higher shear strains due to creation of higher energy dissipation, stability and secondary stiffening.