Fair content dissemination in participatory DTNs

Thanks to advances in the computing capabilities and added functionalities of modern mobile devices, creating and consuming digital media on the move has never been so easy and popular. Most of the DTN routing protocols proposed in the literature to enable content sharing have been exploiting users’ mobility patterns, in order to maximise the delivery probability, while minimising the overall network overhead (e.g., number of message replicas in the system, messages’ path length). Common to all these protocols has been the assumption that devices are willing to participate in the content distribution network; however, because of battery constraints, participation cannot be taken for granted, especially if the very same subset of devices are continuously selected as content carriers, simply because of their mobility properties. Indeed, we demonstrate that state-of-the-art DTN routing protocols distribute load in a highly unfair manner, with detrimental effects on delivery once the assumption of unconditional participation is lifted. To overcome this limitation, we propose a load-balancing mechanism whereby nodes maintain local estimates of network workload, and use them to direct traffic towards the least loaded portion of the network. We implement the mechanism on top of a source-based DTN routing protocol, and demonstrate, by means of simulation using a variety of real mobility traces, that high delivery is now achieved without compromising fairness.     

Prevention of 7-ketocholesterol-induced side effects by natural compounds

Abstract

Cholesterol oxidation products, also named oxysterols, can be formed either by cholesterol auto-oxidation, enzymatically or both. Among these oxysterols, 7-ketocholesterol (7KC) is mainly formed during radical attacks that take place on the carbon 7 of cholesterol. As increased levels of 7KC have been found in the tissues, plasma and/or cerebrospinal fluid of patients with major diseases, especially age-related diseases (cardiovascular diseases, eye diseases, neurodegenerative diseases), some cancers, and chronic inflammatory diseases, it is suspected that 7KC, could contribute to their development. Since 7KC, provided by the diet or endogenously formed, is not or little efficiently metabolized, except in hepatic cells, its cellular accumulation can trigger numerous side effects including oxidative stress, inflammation and cell death. To counteract 7KC-induced side effects, it is necessary to characterize the metabolic pathways activated by this oxysterol to identify potential targets for cytoprotection and geroprotection. Currently, several natural compounds (tocopherols, fatty acids, polyphenols, etc) or mixtures of compounds (oils) used in traditional medicine are able to inhibit the deleterious effects of 7KC. The different molecules identified could be valued in different ways (functional foods, recombinant molecules, theranostic) to prevent or treat diseases associated with 7KC.     

Simultaneous influence of uni-univalent salt aqueous solutions and sodium dodecyl sulfate surfactant on interfacial tension of toluene-water

The simultaneous influence of NaCl, KCl and KI salts and well known sodium dodecyl sulfate (SDS) surfactant on the interfacial tension (IFT) of conventionally used chemical system of toluene-water was studied. The concentration range of salts was within (0.010 to 0.075) mol/dm³ and of surfactant within (1.7 to 26.0)×10^?5 mol/dm³. SDS adsorption on interface is highly intensified in the presence of salts and IFT can reach to 67.1% of its initial value. Accordingly, the role of ions was investigated and the order of salts effectiveness was revealed as KI?KCl>NaCl. The obtained data, with both effects, were nicely reproduced using an equation of state, based on Gibbs adsorption equation and the Langmuir isotherm. Two relevant important adsorption parameters exhibited reasonable variations. Furthermore, the general revealed linear variation of IFT with a previously defined “effective concentration” indicates the strong influence of the surfactant counterions.     

Dye removal from colored‐textile wastewater using chitosan‐PPI dendrimer hybrid as a biopolymer: Optimization,kinetic, and isotherm studies

Preparation of a biopolymer chitosan‐polypropylene imine (CS‐PPI) as a biocompatible adsorbent and its reactive textile dyes removal potential were performed. Chemical specifications of CS‐PPI were determined using Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR. The surface morphology of the CS‐PPI surface was characterized by scanning electron microscopy. Results confirmed that the linkages between the NH₂ groups of PPI dendrimer and carboxylic groups of modified Chitosan were accomplished chemically. Two textile reactive dyes, reactive black 5 (RB5) and reactive red 198 (RR198), were used as model compounds. A response surface methodology was applied to estimate the simple and combined effects of the operating variables, including pH, dye concentration, time contact, and temperature. Under the optimal values of process parameters, the dye removal performance of 97 and 99% was achieved for RB5 and RR198, respectively. Furthermore, the isotherm and kinetic models of dyes adsorption were performed. Adsorption data represented that both examined dye followed the Langmuir isotherm. The adsorption kinetics of both reactive dyes were satisfied by pseudo‐second order equation. Based on this study, CS‐PPI due to having high adsorption capacity (6250 mg/g for RB5 and 5882.35 mg/g for RR198), biocompatibility and ecofriendly properties might be a suitable adsorbent for removal of reactive dyes from colored solutions. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Application of a biopolymer chitosan-poly(propylene)imine dendrimer hybrid as an antimicrobial agent on the wool fabrics

In this research, chitosan-poly(propylene)imine dendrimer hybrid (CS-PPI) was applied to wool fabrics; and weight gain and antibacterial properties of the grafted wool fabric by CS-PPI were investigated. A response surface methodology employed for optimization of the important factors such as pH, processing time, and CS-PPI and cross-linking agent (CA) concentrations. The physical properties showed sensible changes regardless of weight gain. The maximum weight gain was obtained when the wool fabrics were treated with pH 5, processing time 24 h, CS-PPI 20 %(owf) and CA 5 % over weight of fiber (owf). Scanning electron microscopy analysis showed the presence of foreign particles determinedly fixed to the surface of the wool fabric. Fourier transform infrared spectroscopy and differential scanning colorimetry revealed the grafting of CS-PPI onto wool fabric by forming novel chemical bonds between the wool and CS-PPI molecules. The treated wool fabrics showed broad-spectrum antimicrobial activity against gram-positive and gram-negative bacteria. Antimicrobial activities of the treated wool by CS-PPI at a concentration of 20 % over weight of fiber (owf) demonstrated 100 % bacterial growth inhibition, which was preserved more than 84 % even after being washed in 12 various conditions repeatedly. The grafted wool fabrics have antibacterial potential due to the antibacterial property of CS-PPI molecules. The mechanism of CS-PPI grafting onto wool fabric using CA was proposed. The findings of this study support the potential production of the new environmentally friendly textile fibers.     

Effect on Mechanical Performance of UHMWPE/HDPE-Blend Reinforced with Kenaf,Basalt and Hybrid Kenaf/Basalt Fiber

The aim of this study was to investigate the performance of UHMWPE/HDPE-reinforced kenaf, basalt and hybrid kenaf/basalt composites. Mechanical testing of these samples was carried out such as tensile, flexural (three-point bending) and an impact test (Charpy). Pure resin (UHMWPE/HDPE) samples were tested and compare with reinforced 10% weight fraction of kenaf, basalt and hybrid kenaf/basalt samples to identifying their contribution and potential in this new composite material. UHMWPE/ HDPE sample was produced in constant ratio 60:40 respectively via extrusion process. Basalt reinforced UHMWPE/HDPE generates the highest elastic modulus result compared to kenaf and hybrid kenaf/basalt as a reinforcement material. The tensile results of kenaf reinforcement UHMWPE/HDPE samples are significantly higher (20%) than pure blend resin, which is an indication for good performance of kenaf, basalt and hybrid kenaf/basalt to be used in UHMWPE/HDPE-blend polymers. The flexural and Charpy strengths show the drawback results, where performance of polymer is reduced 5% with the absence of kenaf. It can be concluded that kenaf, basalt and hybrid kenaf/basalt fiber successfully increase the UHMWPE/HDPE blends performance especially under tensile loading.     

Genetic Predisposition to Myelodysplastic Syndromes: A Challenge for Adult Hematologists

Myelodysplastic syndromes (MDS) arising in the context of inherited bone marrow failure syndromes (IBMFS) differ in terms of prognosis and treatment strategy compared to MDS occurring in the adult population without an inherited genetic predisposition. The main molecular pathways affected in IBMFS involve telomere maintenance, DNA repair, biogenesis of ribosomes, control of proliferation and others. The increased knowledge on the genes involved in MDS pathogenesis and the wider availability of molecular diagnostic assessment have led to an improvement in the detection of IBMFS genetic predisposition in MDS patients. A punctual recognition of these disorders implies a strict surveillance of the patient in order to detect early signs of progression and promptly offer allogeneic hematopoietic stem cell transplantation, which is the only curative treatment. Moreover, identifying an inherited mutation allows the screening and counseling of family members and directs the choice of donors in case of need for transplantation. Here we provide an overview of the most recent data on MDS with genetic predisposition highlighting the main steps of the diagnostic and therapeutic management. In order to highlight the pitfalls of detecting IBMFS in adults, we report the case of a 27-year-old man affected by MDS with an underlying telomeropathy.     

Sequential Template Decomposition to Adjust the Performance of Imperfect Zeolite BEA Membranes

Zeolite membranes offer superior thermal, chemical, and mechanical stability compared to polymeric membranes. However, it is still a challenge to prepare completely defect‐free membranes without any intercrystalline voids, which is necessary for gas separation processes. In this study zeolite beta (*BEA) membranes on stainless‐steel supports were prepared by applying the multiple in situ crystallization technique. The membranes were used as a model system to systematically study the decomposition of the organic structure directing agent tetraethylammoniumhydroxide (TEA‐OH). It was evaluated if the organic decomposition products of TEA‐OH can be used for enhancing the membranes selectivity. Post‐treatment experiments have been carried out to adjust surface properties and pore size dimensions in the zeolitic membrane layer. The results show that membranes calcined at lower temperatures exhibit a higher gas selectivity.     

Portable device for the local three-dimensional deformation measurement using a single camera

The aim of this paper is to establish and validate a portable device for the local three dimensional deformation measurements using a single camera combined with a triangular prism mirror and two mirrors. The mirrors were utilized to convert a single camera into a stereo image system, which views a test object from two different directions and records the surface images of the test specimen on the two halves of the camera sensor in order to achieve a three-dimensional measurement. The proposed system consists of a single camera and the reflection system was integrated into a portable device to achieve a truly portable, low-cost,local three-dimensional deformation measurement, one-time calibration and easy implementation in situ. The optical design and measurement procedures to obtain the three-dimensional(3 D) deformation measurements of the proposed system were described in detail. The efficiency and precision of the proposed system were verified by measuring the displacements of a translated flat plate. As a practical application, the proposed system is used to measure the out-of-plane displacement of an aluminum circular plate with a central load. Moreover, the normal strain measurement of a plastic beam under symmetric four-point bending via an outer loading frame was also presented. The measurement results are in good accordance with the data obtained by strain gauges. The experimental results revealed that the proposed system was practicable and effective for the local three-dimensional deformation measurement. This system well-suited to both laboratory and field condition and will have significant application in the fields of engineering.