Proton Conduction in Dense and Porous Nanocrystalline Ceria Thin Films

The electrical conductivity of ceria thin films (epitaxial as well as dense and porous nanocrystalline) is investigated in dry and wet atmosphere at temperatures below 500 °C. For the epitaxial and the fully dense nanocrystalline samples, no significant differences can be observed between dry and wet conditions. In marked contrast, the nanocrystalline porous films obtained via spin coating exhibit a considerable enhancement of the protonic conductivity below 300 °C in wet atmosphere. This outcome reveals that the residual open mesoporosity plays the key role for the enhancement of the proton transport at low temperatures and not the high density of grain boundaries. The quantitative analysis of the various pathways, along which the proton transport can take place, indicates that the observed proton conduction can arise not only from bulk water adsorbed in the open pores but also from the space charge zones on the water side of the water/oxide interface.     

High efficiency,high switching speed,AlGaAs/GaAs P-HEMT DC–DC converter for integrated power amplifier modules

This paper presents a high efficiency, high switching frequency DC–DC buck converter in AlGaAs/GaAs technology, targeting integrated power amplifier modules for wireless communications. The switch mode, inductor load DC–DC converter adopts an interleaved structure with negatively coupled inductors. Analysis of the effect of negative coupling on the steady state and transient response of the converter is given. The coupling factor is selected to achieve a maximum power efficiency under a given duty cycle with a minimum penalty on the current ripple performance. The DC–DC converter is implemented in 0.5 μm GaAs p-HEMT process and occupies 2 × 2.1 mm² without the output network. An 8.7 nH filter inductor is implemented in 65 μm thick top copper metal layer, and flip chip bonded to the DC–DC converter board. The integrated inductor achieves a quality factor of 26 at 150 MHz. The proposed converter converts 4.5 V input to 3.3 V output for 1 A load current under 150 MHz switching frequency with a measured power efficiency of 84%, which is one of the highest efficiencies reported to date for similar current/voltage ratings.     

Characterization of aromatic compounds and biological activities of essential oils from Tunisian aromatic plants

The aromatic compounds and biological activities of essential oils from six Tunisian aromatic plants including Artemisia herba-alba, Rosmarinus officinalis, Thymus capitatus, Mentha piperita, Ocimum basilicum and Artemisia absinthium were investigated. Hydro-distillation was used to extract essential oil from these plants. The identification of compounds from essential oils was performed using GC–MS analysis. Camphor (28.47%) was the major compound of A. absinthium essential oil. High contents of verbenone (20.99%) and camphor (19.72%) were found in R. officinalis. In the case of T. capitatus, carvacrol (81.09%), gamma terpinene (6.61%) and caryophyllene (4.87%) were identified as the major compounds. While eugenol (24.69%), linalool (18.00%) were characteristic compounds of O. basilicum essential oil, camphor (39.10%) and farnesol (14.25%) together with bornyl acetate (12.31%) were the main constituents of A. absinthium. These oils were also subjected to a screening for their antioxidant activity and essential oil from A. absinthium showed a greater antioxidant activity (IC₅₀?=?0.0063 mg/mL) compared to the standard Vitamin E (IC₅₀?=?0.019 mg/mL). The antibacterial activities of the oils against seven pathogenic strains, Pseudomonas aeruginosa, Bacillus cereus, Salmonella, Klebsiella pneumoniae, Escherichia coli, Staphylococcus aureus, Enterococcus faecalis and Micrococcus luteus, were tested. The highest and broadest activity was shown by M. piperita; however, Ocimum basilicum was inactive against all strains. Essential oils were also evaluated for antidiabetic and anti-acetylcholinesterase activities. The IC₅₀ values of A. herba-alba and O. basilicum against α-amylase were respectively 17.76 and 16.32 µg/mL suggesting a powerful anti-diabetic effect comparable to that of acarbose (IC₅₀?=?14.88 µg/mL). R. officinalis, M. piperita and A. absinthium exhibited an interesting acetylcholinesterase inhibition with IC₅₀ equal to 22, 24 and 58 µg/mL respectively.     

Production of bioactive proteins and peptides from the diatom Nitzschia laevis and comparison of their in vitro antioxidant activities with those from Spirulina platensis and Chlorella vulgaris

This research focuses on green production of bioactive proteins and hydrolysates from Nitzschia. A comparison of antioxidant activities was established between protein extracts and hydrolysates from Nitzschia and two other well‐known microalgae, chlorella and spirulina. Protein hydrolysates from these microalgae were produced using Alcalase^®, Flavourzyme^® and Trypsin. The hydrolysis process enhanced the antioxidant activities in general, especially those obtained using Alcalase^®. Nitzschia showed the highest (P < 0.05) total phenolic content/reducing capacity (2.4 ± 0.02 mg GAE/100 g) after 90 min of hydrolysis with Alcalase^®. The ABTS [2,2′‐Azino‐bis(3‐ethylbenzothiazoline‐6‐sulphonic acid)] radical scavenging activity (66.77 ± 0.00%) was highest (P < 0.05) after 120 min of hydrolysis, but DPPH (2,2‐Diphenyl‐1‐picrylhydrazyl radical) was low (29.59 ± 0.02%). A correlation between ABTS activity and total phenolic contents was the highest (P < 0.05) for protein hydrolysates from all three organisms using Alcalase^®, but superoxide anion radical scavenging activity was intermediate for Nitzschia. Therefore, Nitzschia protein hydrolysates have the potential to be used as antioxidants.     

An investigation into the effects of fiber architecture on the mechanical behavior of woven preforms

This study attempts to analyze the behavior of different types of woven composite preforms (i.e. plain, twill, and satin) under distinct loading conditions. To this end, fabric elements are modeled using discrete finite element approach. Different loading scenarios such as intra-ply shear, in-plane tension, and simultaneous intra-ply shear and in-plane tension loads are applied to the fabric elements. TexGen software is utilized to develop the geometric model of the fabric elements. Subsequently, the geometric model is exported to ABAQUS FE package and mechanistic analyses are conducted. The FE results reveal that under the same loading conditions, the in-plane tensile stress induced in plain weave elements has the minimum value compared to twill and satin elements. Having said that, the intra-ply shear resistance of the plain element is larger than the other weave types. What’s more, the behavior of the fabric elements under simultaneous intra-ply shear and tension loading scenarios are studied that discloses almost the similar response for all weave types.     

Potassium lactate combined with sodium diacetate can inhibit growth of Listeria monocytogenes in vacuum-packed cold-smoked salmon and has no adverse sensory effects

Growth of Listeria monocytogenes in ready-to-eat fish products such as cold-smoked salmon is an important food safety issue. The objective of this study was to evaluate the antilisterial activity of potassium lactate (PL) in combination with sodium acetate (SA) or sodium diacetate (SDA) in cold-smoked salmon and to determine whether these compounds could be incorporated easily into the formulations and technology currently used by processors. A commercial brine injector was used to inject salmon filets with either saturated saline brine or saturated saline brine supplemented with combinations of PL and SA (PURASAL Opti.Form PA 4) or PL and SDA (PURASAL Opti.Form PD 4). In the brine-injected cold-smoked salmon, 2.1% (water phase) PL and 0.12% (water phase) SDA delayed the growth of L. monocytogenes for up to 42 days of vacuum-packaged storage at 10 degrees C. Storage at 25 degrees C for 6 h resulted in only a 1-log CFU/g increase in L. monocytogenes. Treatments with lower concentrations of PL and SDA or similar concentrations of PL and SA resulted in an extended lag phase and slower growth of L. monocytogenes. It was not possible to incorporate more than 2% (water phase) PL while ensuring a minimum of 3% (water phase) NaCl in the finished product because PL decreased the solubility of NaCl. Sensory analyses revealed that the preservatives did not negatively affect flavor or odor. The combination of PL and SDA is therefore a viable technology for preventing L. monocytogenes growth on cold-smoked salmon.     

Potential Pro-Inflammatory Effect of Vitamin E Analogs through Mitigation of Tetrahydrocannabinol (THC) Binding to the Cannabinoid 2 Receptor

Vitamin E acetate, which is used as a diluent of tetrahydrocannabinol (THC), has been reported as the primary causative agent of e-cigarette, or vaping, product use-associated lung injury (EVALI). Here, we employ in vitro assays, docking, and molecular dynamics (MD) computer simulations to investigate the interaction of vitamin E with the membrane-bound cannabinoid 2 receptor (CB2R), and its role in modulating the binding affinity of THC to CB2R. From the MD simulations, we determined that vitamin E interacts with both CB2R and membrane phospholipids. Notably, the synchronized effect of these interactions likely facilitates vitamin E acting as a lipid modulator for the cannabinoid system. Furthermore, MD simulation and trajectory analysis show that when THC binds to CB2R in the presence of vitamin E, the binding cavity widens, facilitating the entry of water molecules into it, leading to a reduced interaction of THC with CB2R. Additionally, the interaction between THC and vitamin E in solution is stabilized by several H bonds, which can directly limit the interaction of free THCs with CB2R. Overall, both the MD simulations and the in vitro dissociation assay results indicate that THC binding to CB2R is reduced in the presence of vitamin E. Our study discusses the role of vitamin E in limiting the effect of THCs and its implications on the reported pathology of EVALI.     

Performance of RSS Based Cooperative Localization in Millimeter Wave Wireless Sensor Networks

Wireless Personal Communications - Localization in wireless sensor networks (WSNs) is a necessity as there is a vital need to have location information combined with the measured quantities. The...     

Analyzing the Variability in Low-Flow Projections under GCM CMIP5 Scenarios

Water Resources Management - The present study considered the impacts of global climate model (GCM) selection in the Couple Model Intercomparison Phase 5 (CMIP5) scenarios on the low-flow...     

Effect of CO<Subscript>2</Subscript> concentration on the performance of different thermodynamic models for prediction of CH<Subscript>4</Subscript>+CO<Subscript>2</Subscript>+H<Subscript>2</Subscript>O hydrate equilibrium conditions

Accurate prediction of phase equilibria regarding CH₄ replacement in hydrate phase with high pressure CO₂ is an important issue in modern reservoir engineering. In this work we investigate the possibility of establishing a thermodynamic framework for predicting the hydrate equilibrium conditions for evaluation of CO₂ injection scenarios. Different combinations of equations of state and mixing rules are applied and the most accurate thermodynamic models at different CO₂ concentration ranges are proposed.