Degradation of bromoxynil and trifluralin in natural water by direct photolysis and UV plus H2O2 advanced oxidation process

The degradation of two pesticides, bromoxynil and trifluralin, was investigated in ultrapure and natural water solutions under ultraviolet (UV) light and a combination of UV and hydrogen peroxide (H₂O₂). The effect of pH on the photooxidation of the pesticides was also studied. The results indicated that under direct photolysis with monochromatic light at 253.7 nm and different conditions, the photochemical rates followed first-order kinetics, with fluence-based rate constants ranging from 9.15 × 10⁻⁴ to 6.37 × 10⁻³ cm² mJ⁻¹ and 7.63 × 10⁻³ to 1.47 × 10⁻² cm² mJ⁻¹ for bromoxynil and trifluralin, respectively. Quantum yields, in the range of 0.08-0.25 for bromoxynil and 0.12-0.72 for trifluralin, were observed in experiments using ultrapure water. The study also found that the UV/H₂O₂ process enhanced the oxidation rate in comparison to direct photolysis. A 90% degradation with UV dose of 333 and 188 mJ cm⁻² was achieved for bromoxynil and trifluralin, respectively, in natural water, in presence of 8.8 × 10⁻⁴ M H₂O₂. To assess the aquatic toxicity, the Microtox^® 81.9% screening test protocol was used before and after treatment. The test results indicated a decrease in the acute toxicity of the samples after treatment for both pesticides.     

Organochlorine pesticides in colostrums in case of normal and preterm labor (IASI, Romania)

Assessment of organochlorine pesticides (OCPs) in human body is important for human health because they have weak estrogenic or antiestrogenic effects and are considered endocrine disrupters. We used colostrum of women as indicator for levels of OCPs in human body for mothers with normal and preterm labor from eastern part of Romania. Sixty- three samples of colostrum were extracted by solid-phase extraction. Analyses were carried out using gas chromatography coupled to mass spectrometry (GC-MS). OCPs have been detected in all samples, with p,p’-dichlorodiphenyldichloroethylene (p,p’-DDE) and γ-hexachlorocyclohexane (γ-HCH) being at the highest concentrations. Of the organochlorines measured in clostrum samples from women in preterm labor, median levels of DDTs (470 ng/g) and HCHs (99 ng/g) were higher than for the same compounds from women in normal labor (median of DDTs = 268 ng/g and median of HCHs = 96 ng/g). Normal labor had higher median concentrations of HCB (19.5 ng/g) versus preterm labor (14 ng/g). Statistical data show high Spearman correlation coefficients between various OCPs. We found a good correlation between α-, γ-, β- and δ- HCH isomers (p < 0.001) for both normal and preterm labor. The most abundant target compound was p,p’-DDE (median value 96 ng/g, and 137 ng/g for mother with normal and preterm labor, respectively) in all colostrum samples. The estimated daily intakes of HCHs by infants exceeded corresponding Health Canada guidelines.     

Water resistance,mechanical properties,and biodegradability of poly(3‐hydroxybutyrate)/starch composites

Composites of poly(3‐hydroxybutyrate), P(3HB), and starch were prepared by solution casting technique. To improve adhesion of starch to P(3HB), stearic acid was added as a compatibilizer and glycerol as a plasticizer. The water resistance, mechanical, and biodegradable properties of the P(3HB)/starch composites were studied. Diffusion and penetration coefficients of water increased with increasing starch content in the composites. The results showed that the elastic modulus and strain at rupture of the P(3HB)/starch composites were enhanced by increasing starch content upto 10 wt % and the tensile strength increased from 21.2 to 93.9 MPa. The presence of starch content higher than 10 wt % had an adverse effect on the mechanical properties of the investigated composites. The biodegradation rate using Actinomycetes increased proportionally to the starch content in the composite and accelerated in a culture medium of pH ≈ 7.0 at 30°C. Enzymatic degradation experiments showed that lipase produced by Streptomyces albidoflavus didnot degrade P(3HB)/starch composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

PIV/PLIF Study of Impinging Jet Ozone Bubble Column with Mixing Nozzles

This paper introduces the results obtained from a particle image velocimetry/planer laser-induced fluorescence (PIV/PLIF) system used in characterizing an impinging jet ozone bubble column with mixing nozzles. This research aims at evaluating the mixing effect resulting from the nozzle diffusers attached to the outlets of the impinging jets' injectors. The PIV system was used to study the flow patterns of the liquid and gas phases under different superficial gas and liquid velocities (u_G and u_L, respectively) values (from 0.002 to 0.017 m/s and from 0.008 to 0.024 m/s, respectively). Furthermore, a particle dynamics analyzer (PDA) system was used to characterize the bubble sizes under the same operating conditions. The PLIF system was used to determine the liquid axial dispersion coefficient (D_L, m²/s) for the mentioned range of operating conditions. The column average gas hold-up (?_G) and specific interfacial area (a) were then determined in order to evaluate the column's mass transfer efficiency. The results showed that higher mass transfer rates can be obtained by using this column, as high ?_G, and were achieved.     

Experimental and computational studies of multiphase hydrodynamics in a hydrocyclone separator system

The flow patterns within a hydrocyclone separator system have been studied experimentally using particle image velocimetry (PIV) and computationally via large eddy simulations (LES). Various aspects of the flow field such as the process of air core structure formation, pressure and velocity distributions within the system have been characterized. Detailed flow field information in the form of velocity vector maps of entire planes have been obtained experimentally and reproduced computationally. Good qualitative agreements between velocity vector fields, air core structure and averaged velocity distributions have been achieved. LES is deemed to be an adequate methodology for modelling the air core structure and flow patterns of the surrounding liquid in a hydrocyclone separator system.     

CuII Pyrazolyl-Benzimidazole Dinuclear Complexes with Remarkable Antioxidant Activity

Three dinuclear coordination complexes generated from 1-n-butyl-2-((5-methyl-1H-pyrazole-3-yl)methyl)-1H-benzimidazole ( L ), have been synthesized and characterized spectroscopically and structurally by single crystal X-ray diffraction analysis. Reaction with iron(II) chloride and then copper(II) nitrate led to a co-crystal containing 78 % of [Cu(NO₃)(μ-Cl)( L’ )]₂ ( C₁ ) and 22 % of [Cu(NO₃)(μ-NO₃)( L’ )]₂ ( C₂ ), where L was oxidized to a new ligand L^’ . A mechanism is provided. Reaction with copper chloride led to the dinuclear complex [Cu(Cl)(μ-Cl)( L) ]₂ ( C₃ ). The presence of N−H⋅⋅⋅O and C−H⋅⋅⋅O intermolecular interactions in the crystal structure of C₁ and C₂ , and C−H⋅⋅⋅N and C−H⋅⋅⋅Cl hydrogen bonding in the crystal structure of C₃ led to supramolecular structures that were confirmed by Hirshfeld surface analysis. The ligands and their complexes were tested for free radical scavenging activity and ferric reducing antioxidant power. The complex C₁ / C₂ shows remarkable antioxidant activities as compared to the ligand L and reference compounds.     

Nanocrystalline Fe‐Ni alloy/polyamide 6 composites of high mechanical performance made by ultrasound‐assisted master batch technique

The focus of this study is to improve the dispersion state of nanocrystalline (nc) Fe‐Ni particles in polyamide 6 (PA6) matrix and the filler‐matrix interfacial interactions to provide Fe‐Ni alloy/PA6 nanocomposites of remarkable mechanical performance for engineering applications. nc Fe₄₀Ni₆₀ particles were chemically synthesized. Then Fe₄₀Ni₆₀/PA6 nanocomposites of various nanofiller loading were prepared by compounding via a newly modified master batch technique called ultrasound assisted master batch (UMB), followed by injection molding (IM). Their mechanical properties, morphology and structural parameters were characterized and compared with the corresponding properties of Fe₄₀Ni₆₀/PA6 nanocomposites made by solution mixing (SM) and IM. The study reveals that the UMB process is more cost effective and time efficient, simpler and easier to scale up compared with the SM process. In addition, UMB nanocomposites exhibit superior mechanical properties and distinctive morphology compared with the corresponding SM ones. Moreover, structural analyses indicate that physical structural changes occurred in PA6 due to presence of alloy particles are affected differently by the different compounding methods, profound understanding of such phenomenon is focused throughout the article. These distinctive advantages recommend that UMB technique can be of great potential in commercial production of polymer nanocomposites (PNCs). It is concluded that the sonication of nc Fe₄₀Ni₆₀ particles in dilute polymer solution during UMB compounding, a new step that is incorporated for the first time in the master batch process, is mainly responsible for the good wetting between nanoparticles and polymer chains, strong filler‐matrix interactions and consequently the remarkable mechanical performance of UMB PNCs. POLYM. COMPOS., 35:2343–2352, 2014. © 2014 Society of Plastics Engineers     

Edge Computing Platform with Efficient Migration Scheme for 5G/6G Networks

Next-generation cellular networks are expected to provide users with innovative gigabits and terabits per second speeds and achieve ultra-high reliability, availability, and ultra-low latency. The requirements of such networks are the main challenges that can be handled using a range of recent technologies, including multi-access edge computing (MEC), artificial intelligence (AI), millimeter-wave communications (mmWave), and software-defined networking. Many aspects and design challenges associated with the MEC-based 5G/6G networks should be solved to ensure the required quality of service (QoS). This article considers developing a complex MEC structure for fifth and sixth-generation (5G/6G) cellular networks. Furthermore, we propose a seamless migration technique for complex edge computing structures. The developed migration scheme enables services to adapt to the required load on the radio channels. The proposed algorithm is analyzed for various use cases, and a test bench has been developed to emulate the operator’s infrastructure. The obtained results are introduced and discussed.     

Change Point Estimation in the Mean of Multivariate Linear Profiles with No Change Type Assumption via Dynamic Linear Model

Change point estimation is a useful concept that helps quality engineers to effectively search for assignable causes and improve quality of the process or product. In this paper, the maximum likelihood approach is developed to estimate change point in the mean of multivariate linear profiles in Phase II. After the change point, parameters are estimated through filtering and smoothing approaches in dynamic linear model. The proposed change point estimator can be applied without any prior knowledge about the change type against existing estimators which assume change type is known in advance. Besides, sporadic change point can be identified as well. Simulation results show the effectiveness of the proposed estimators to estimate step, drift and monotonic, as well as sporadic changes in small to large shifts. In addition, effect of different values of the Multivariate Exponentially Weighted Moving Average (MEWMA) control chart smoothing coefficient on the performance of the proposed estimator is investigated presenting that the smoothing estimator has more uniform performance. Copyright © 2015 John Wiley & Sons, Ltd.