Water resistance,mechanical properties,and biodegradability of poly(3‐hydroxybutyrate)/starch composites

Composites of poly(3‐hydroxybutyrate), P(3HB), and starch were prepared by solution casting technique. To improve adhesion of starch to P(3HB), stearic acid was added as a compatibilizer and glycerol as a plasticizer. The water resistance, mechanical, and biodegradable properties of the P(3HB)/starch composites were studied. Diffusion and penetration coefficients of water increased with increasing starch content in the composites. The results showed that the elastic modulus and strain at rupture of the P(3HB)/starch composites were enhanced by increasing starch content upto 10 wt % and the tensile strength increased from 21.2 to 93.9 MPa. The presence of starch content higher than 10 wt % had an adverse effect on the mechanical properties of the investigated composites. The biodegradation rate using Actinomycetes increased proportionally to the starch content in the composite and accelerated in a culture medium of pH ≈ 7.0 at 30°C. Enzymatic degradation experiments showed that lipase produced by Streptomyces albidoflavus didnot degrade P(3HB)/starch composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

PIV/PLIF Study of Impinging Jet Ozone Bubble Column with Mixing Nozzles

This paper introduces the results obtained from a particle image velocimetry/planer laser-induced fluorescence (PIV/PLIF) system used in characterizing an impinging jet ozone bubble column with mixing nozzles. This research aims at evaluating the mixing effect resulting from the nozzle diffusers attached to the outlets of the impinging jets' injectors. The PIV system was used to study the flow patterns of the liquid and gas phases under different superficial gas and liquid velocities (u_G and u_L, respectively) values (from 0.002 to 0.017 m/s and from 0.008 to 0.024 m/s, respectively). Furthermore, a particle dynamics analyzer (PDA) system was used to characterize the bubble sizes under the same operating conditions. The PLIF system was used to determine the liquid axial dispersion coefficient (D_L, m²/s) for the mentioned range of operating conditions. The column average gas hold-up (?_G) and specific interfacial area (a) were then determined in order to evaluate the column's mass transfer efficiency. The results showed that higher mass transfer rates can be obtained by using this column, as high ?_G, and were achieved.     

Experimental and computational studies of multiphase hydrodynamics in a hydrocyclone separator system

The flow patterns within a hydrocyclone separator system have been studied experimentally using particle image velocimetry (PIV) and computationally via large eddy simulations (LES). Various aspects of the flow field such as the process of air core structure formation, pressure and velocity distributions within the system have been characterized. Detailed flow field information in the form of velocity vector maps of entire planes have been obtained experimentally and reproduced computationally. Good qualitative agreements between velocity vector fields, air core structure and averaged velocity distributions have been achieved. LES is deemed to be an adequate methodology for modelling the air core structure and flow patterns of the surrounding liquid in a hydrocyclone separator system.     

CuII Pyrazolyl-Benzimidazole Dinuclear Complexes with Remarkable Antioxidant Activity

Three dinuclear coordination complexes generated from 1-n-butyl-2-((5-methyl-1H-pyrazole-3-yl)methyl)-1H-benzimidazole ( L ), have been synthesized and characterized spectroscopically and structurally by single crystal X-ray diffraction analysis. Reaction with iron(II) chloride and then copper(II) nitrate led to a co-crystal containing 78 % of [Cu(NO₃)(μ-Cl)( L’ )]₂ ( C₁ ) and 22 % of [Cu(NO₃)(μ-NO₃)( L’ )]₂ ( C₂ ), where L was oxidized to a new ligand L^’ . A mechanism is provided. Reaction with copper chloride led to the dinuclear complex [Cu(Cl)(μ-Cl)( L) ]₂ ( C₃ ). The presence of N−H⋅⋅⋅O and C−H⋅⋅⋅O intermolecular interactions in the crystal structure of C₁ and C₂ , and C−H⋅⋅⋅N and C−H⋅⋅⋅Cl hydrogen bonding in the crystal structure of C₃ led to supramolecular structures that were confirmed by Hirshfeld surface analysis. The ligands and their complexes were tested for free radical scavenging activity and ferric reducing antioxidant power. The complex C₁ / C₂ shows remarkable antioxidant activities as compared to the ligand L and reference compounds.     

Nanocrystalline Fe‐Ni alloy/polyamide 6 composites of high mechanical performance made by ultrasound‐assisted master batch technique

The focus of this study is to improve the dispersion state of nanocrystalline (nc) Fe‐Ni particles in polyamide 6 (PA6) matrix and the filler‐matrix interfacial interactions to provide Fe‐Ni alloy/PA6 nanocomposites of remarkable mechanical performance for engineering applications. nc Fe₄₀Ni₆₀ particles were chemically synthesized. Then Fe₄₀Ni₆₀/PA6 nanocomposites of various nanofiller loading were prepared by compounding via a newly modified master batch technique called ultrasound assisted master batch (UMB), followed by injection molding (IM). Their mechanical properties, morphology and structural parameters were characterized and compared with the corresponding properties of Fe₄₀Ni₆₀/PA6 nanocomposites made by solution mixing (SM) and IM. The study reveals that the UMB process is more cost effective and time efficient, simpler and easier to scale up compared with the SM process. In addition, UMB nanocomposites exhibit superior mechanical properties and distinctive morphology compared with the corresponding SM ones. Moreover, structural analyses indicate that physical structural changes occurred in PA6 due to presence of alloy particles are affected differently by the different compounding methods, profound understanding of such phenomenon is focused throughout the article. These distinctive advantages recommend that UMB technique can be of great potential in commercial production of polymer nanocomposites (PNCs). It is concluded that the sonication of nc Fe₄₀Ni₆₀ particles in dilute polymer solution during UMB compounding, a new step that is incorporated for the first time in the master batch process, is mainly responsible for the good wetting between nanoparticles and polymer chains, strong filler‐matrix interactions and consequently the remarkable mechanical performance of UMB PNCs. POLYM. COMPOS., 35:2343–2352, 2014. © 2014 Society of Plastics Engineers     

Sleeping with one eye open: Marital abuse as an antecedent of poor sleep.

In a diverse community sample of 241 married couples, we examined received psychological abuse (PA) as a longitudinal predictor of men's and women's sleep. Participants reported on marital functioning and mental health during three assessments (T1, T2, T3) and sleep problems during two assessments (T2, T3), with 1-year lags between waves. Growth curve analyses revealed that for both spouses, higher initial levels of PA and increases in PA over time predicted greater sleep disturbances at T3. For husbands and wives, anxiety and depression mediated some of the associations between PA and sleep problems. For wives, moderation effects highlighted the importance of violence, anxiety, and depression in exacerbating sleep problems associated with PA. Results build on and contribute significantly to the scant literature implicating the importance of the marital relationship for sleep and suggest that simultaneous consideration of intrapersonal and interpersonal variables is critical when explicating sleep disruptions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

US Foreign Affiliates,Technology Diffusion and Host Country Human Development: Human Development Index versus Human Capital

In this study, we use a cross-sectionally correlated and timewise autoregressive model and panel data for the period 1966–2000 to investigate human development as a measure of host country absorptive capacity in 30 developed and developing countries. The results suggest that technology diffusion from US foreign affiliates has a positive and significant impact on labor productivity only if host countries have a minimum level of human development. This condition may partially explain why previous studies show mixed support for the hypothesis that foreign affiliates have a positive effect on productivity in developing countries. Although the results have to be interpreted with caution, the policy implication is that human development enhances the capacity of countries to reap the benefits of foreign direct investments.     

Photo- and bio-degradation of poly(ester-urethane)s films based on poly[(R)-3-Hydroxybutyrate] and poly(ε-Caprolactone) blocks

Biodegradable segmented poly(ester-urethane)s derived from telechelic dihydroxy-poly[(R)-3-hydroxybutyrate], acting as hard segments, and poly(ε-caprolactone)-diols, acting as soft segments, using 1,6-hexamethylene diisocyanate, as non toxic connecting agent, were synthesized. The copolymers were characterized with regard to their molecular weight by GPC and their main thermal transitions by DSC. These copolymers as well as PHB were exposed to UV-irradiation for different time intervals and the changes in the chemical structure were analyzed by FTIR spectroscopy. Under our experimental conditions, it was found that the increase of irradiation time was accompanied by increase of the proportion of the gel fraction and the decrease of the intrinsic viscosity of the soluble fraction of the investigated copolymers. The biodegradability of PHB and poly(ester-urethane) sample containing ~40 wt% PHB before and after UV-irradiation was investigated under soil burial. The results showed that the photolysis in air prior to biodegradation increased the rate of degradation.     

Effect of frozen storage of hake,sardine and mixed minces on natural actomyosin extracted in salt solutions

Natural actomyosin extracted in salt solutions from mixtures of hake and sardine minces (3:1; 1:1 and 1:3 w/w) stored frozen for up to 1 year differed in the amount extracted and in the characteristics of the extracts. In the mixed minces the amount of natural actomyosin extracted decreased during frozen storage at a higher rate than that theoretically corresponding to the amount of hake in the mixes. With increasing storage time and proportion of sardine a lower percentage of myosin heavy chain and actin was observed by electrophoresis. An increased size of aggregates was also observed by electrophoresis and transmission electron microscopy. The stability of emulsions was enhanced when aggregates appeared in the extracts. The decrease in the amount of natural actomyosin extracted does not explain the changes observed in the texture of the minces during frozen storage. This may indicate that the size of the aggregates unextractable in salt solutions, independently of the type of bonds that bind the proteins in the aggregates, plays an important role in the textural changes observed. Copyright © 2003 Society of Chemical Industry     

Pilot Study of Quality Function Deployment in Construction Projects

Quality function deployment (QFD) is a process that has been used for managing the development of new manufactured products. In this process, both spoken and unspoken needs of the customers are determined, prioritized, and translated to design parameters. Such design parameters are assigned specific target values and are frequently checked against customers’ needs throughout the development cycle to ensure customers’ satisfaction with the end product. This paper describes a pilot study in which QFD was implemented in a design-construction project. The project scope involved the preparation of a conceptual design for a modern large-size classroom for college students. The design was intended to become a model for the university’s future classrooms. The study proved that QFD could be successfully adopted in engineering-construction projects. However, the study identified a number of implementation challenges. In addition, more applications are necessary to take the process throughout the full project delivery cycle, as the pilot study involved only the preliminary engineering and conceptual design phase.