Polyester polyols for waterborne polyurethanes and hybrid dispersions

In this study, environmentally friendly polyester based polyurethane dispersions (PUDs) were synthesized using various combinations of isophthalic acid, adipid acid and maleic anhydride (IPA-AA-MA). A triangular empirical model was employed to optimize total number of experiments for optimal performance of polyurethane dispersions. In addition to PUDs, polyurethane/acrylate hybrid dispersions (PU/AC) were synthesized using graft copolymerization method to enhance the performance/properties of PUDs and for potential cost benefit.     

Performance assessment of decision-making units using an adaptive neural network algorithm: one period case

This study proposes a nonparametric method based on adaptive neural network (ANN) technique for measuring efficiency of decision making units (DMUs) in one period case as a complementary tool for the ANN-based efficiency methods in the previous studies. In previous studies, there are needed to have large volume of data, and so the proposed method in this study is more applicable because it can be used for the cases which have no historical data. In fact, a limitative weakness of the ANN-based efficiency methods about applying them for these cases is removed. So, it can be a competitive method to the other common tools for measuring efficiency. By noting the importance of flexible manufacturing system, this study presents a decision-making model for optimization of operators’ allocation in cellular manufacturing system by computer simulation. The methodology is illustrated through its application on a previously reported dataset. It was found out that ANN provides more robust results and identifies more efficient units than the conventional methods since better performance patterns are explored.     

油性微乳液的循环气升式反应器的流体力学和传质性能研究简

This study reports an experimental investigation on hydrodynamics and mass transfer characteristics in a 15.6x10-3 m3 external loop airlift reactor for oil-in-water micro-emulsions with oil to water volume ratio （φ） rang- ing from 3% to 7% （by volume）. For comparative purposes, experiments were also carried out with water. Increase in φ of micro-emulsion systems results in an increment in the gas holdup and a decrease in the volumetric gas-liquid oxygen transfer coefficient and liquid circulation velocity, attributed to the escalation in the viscosity of mi- cro-emulsions. The gas holdup and volumetric mass transfer coefficient for micro-emulsion systems are signifi- cantly higher than that of water system. Two correlations are developed to predict the gas holdup and oxygen trans- fer coefficient     

Planning and the making of a propertied landscape

Although property is a basic ingredient of planning, its repercussions on the profession have rarely been considered. Building on the critical analysis of property, I argue that planning is giving in to the “property effect,” the unquestioned assumption that natural and built landscapes are propertied. Looking specifically at one case-study of land-use planning in Tibneen (Lebanon), I show planning interventions replicate inequalities embedded in property relations, maintain the dominance of propertied representation of the landscape, and limit possible claims over natural and built landscapes to those formulated within the framework of the ownership model. Consequently, land-use planning determines the possible futures of particular towns and regions through the institutional structures of the property regimes in place and within the historically and geographically contingent political-economies where these regimes operate.     

Design of a continuous-flow reactor for in situ x-ray absorption spectroscopy of solids in supercritical fluids

This paper presents the design and performance of a novel high-temperature and high-pressure continuous-flow reactor, which allows for x-ray absorption spectroscopy or diffraction in supercritical water and other fluids under high pressure and temperature. The in situ cell consists of a tube of sintered, polycrystalline aluminum nitride, which is tolerant to corrosive chemical media, and was designed to be stable at temperatures up to 500 °C and pressures up to 30 MPa. The performance of the reactor is demonstrated by the measurement of extended x-ray absorption fine structure spectra of a carbon-supported ruthenium catalyst during the continuous hydrothermal gasification of ethanol in supercritical water at 400 °C and 24 MPa.     

1,2,3-Triazolium-based poly(acrylate ionic liquid)s

Nitroxide-mediated radical polymerization of a tailor-made acrylate carrying a 1,2,3-triazole group with an undecanoyl spacer affords a well-defined (M_n = 7860 g mol⁻¹ and D = 1.39) neutral polyacrylate precursor. A series of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) is then obtained by straightforward quaternization of the 1,2,3-triazole groups with methyl iodide and subsequent anion metathesis reactions. Among the prepared materials, TPIL with bis(trifluoromethane)sulfonimide anion exhibits low glass transition temperature (T_g = −40 °C), high thermal stability (T_d10 = 325 °C) and anhydrous ionic conductivity of 4 × 10⁻⁶ S cm⁻¹ at 30 °C, as measured by differential scanning calorimetry, thermogravimetric analysis and broadband dielectric spectroscopy, respectively.     

Organochlorine pesticides in colostrums in case of normal and preterm labor (IASI, Romania)

Assessment of organochlorine pesticides (OCPs) in human body is important for human health because they have weak estrogenic or antiestrogenic effects and are considered endocrine disrupters. We used colostrum of women as indicator for levels of OCPs in human body for mothers with normal and preterm labor from eastern part of Romania. Sixty- three samples of colostrum were extracted by solid-phase extraction. Analyses were carried out using gas chromatography coupled to mass spectrometry (GC-MS). OCPs have been detected in all samples, with p,p’-dichlorodiphenyldichloroethylene (p,p’-DDE) and γ-hexachlorocyclohexane (γ-HCH) being at the highest concentrations. Of the organochlorines measured in clostrum samples from women in preterm labor, median levels of DDTs (470 ng/g) and HCHs (99 ng/g) were higher than for the same compounds from women in normal labor (median of DDTs = 268 ng/g and median of HCHs = 96 ng/g). Normal labor had higher median concentrations of HCB (19.5 ng/g) versus preterm labor (14 ng/g). Statistical data show high Spearman correlation coefficients between various OCPs. We found a good correlation between α-, γ-, β- and δ- HCH isomers (p < 0.001) for both normal and preterm labor. The most abundant target compound was p,p’-DDE (median value 96 ng/g, and 137 ng/g for mother with normal and preterm labor, respectively) in all colostrum samples. The estimated daily intakes of HCHs by infants exceeded corresponding Health Canada guidelines.     

Use Dimensions of an Alley Revitalization Project

The redesign of alleyways located in commercial districts is typically undertaken to effect economic development and to develop a sense of community and a sense of place through these spaces. An investigation of a recently renovated alley in the Hollywood neighbourhood of Los Angeles, CA was conducted to assess aspects of the efficacy of this project—namely, how and by what magnitude use of the alley differed from use of an unconverted alley. Behavioural observations carried out in the East Cahuenga Pedestrian Alley and a nearby control alley revealed considerable differences in use. Findings include that nearly 90% of all recorded activity occurred in the redesigned alley and the majority of this was pedestrian- and dining-related, while control alley activity was heavily transportation- and work-oriented. Results substantiate claims that alley landscape redesign revitalises social life in commercial district alleys.     

Environmental impact assessment of the Egyptian cement industry based on a life-cycle assessment approach: a comparative study between Egyptian and Swiss plants

Egypt in 2015 announced the alteration of the fuels used in cement plants without the least regard to minimizing the environmental burden (EB) excesses. This study conducts a life-cycle assessment (LCA) of Egyptian cement-manufacturing unit, which is considered as the first one on LCA cement analysis to be conducted in Egypt. This study investigates the LCA of the cement industry in Egypt compared to the Swiss industry, using two methodologies. The first one has been done on-site, surveying the most common types of cement used in the construction industry in Egypt. Meanwhile, SimaPro software has been used to assess the environmental impacts, and three different cement plants were selected for this study: an Egyptian cement plant (ECP) which uses electricity, natural gas, and diesel as energy sources; a Swiss cement plant (SCP) which depends mainly on electricity, natural gas, and coal; and an Egyptian hypothetical plant (EHP) in which electricity and coal are assumed to be the main energy feeds, and comparisons of different strategies including midpoint and endpoint methods are outlined. Regarding the midpoint method, ETP recorded higher respiratory inorganics, aquatic acidification, global warming, and nonrenewable energy impacts than ECP, because of using coal, while for SCP, global warming and respiratory inorganics achieved the highest adverse impacts compared to ECP and EHP—due to the different manufacturing technology used. With regard to the endpoint method, the peak possibility of human health deterioration has been recorded due to the use of coal as fuel. This possibility was reduced by 46 % in the case of SCP as a result of the technology applied, which interestingly represents a reasonable reduction in terms of technological application.     

Automated imaging, identification, and counting of similar cells from digital hologram reconstructions

This paper presents our method, which simultaneously combines automatic imaging, identification, and counting with the acquisition of morphological information for at least 1000 blood cells from several three-dimensional images of the same sample. We started with seeking parameters to differentiate between red blood cells that are similar but different with respect to their development stage, i.e., mature or immature. We highlight that these cells have different diffractive patterns with complementary central intensity distribution in a given plane along the propagation axis. We use the Fresnel approximation to simulate propagation through cells modeled as spheroid-shaped phase objects and to find the cell property that has the dominant influence on this behavior. Starting with images obtained in the reconstruction step of the digital holographic microscopy technique, we developed a code for automated simultaneous individual cell image separation, identification, and counting, even when the cells are partially overlapped on a slide, and accurate measuring of their morphological features. To find the centroids of each cell, we propose a method based on analytical functions applied at threshold intervals. Our procedure separates the mature from the immature red blood cells and from the white blood cells through a decision based on gradient and radius values.