Chemical analysis of volatiles emitted by Pinus svlvestris after induction by insect oviposition

Gas chromatography – mass spectrometry analyses of the headspace volatiles of Scots pine (Pinus sylvestris) induced by egg deposition of the sawfly Diprion pini were conducted. The odor blend of systemically oviposition-induced pine twigs, attractive for the eulophid egg parasitoid Chrysonotomyia ruforum, was compared to volatiles released by damaged pine twigs (control) that are not attractive for the parasitoid. The mechanical damage inflicted to the control twigs mimicked the damage by a sawfly female prior to egg deposition. The odor blend released by oviposition-induced pine twigs consisted of numerous mono- and sesquiterpenes, which all were also present in the headspace of the artificially damaged control twigs. A quantitative comparison of the volatiles from oviposition-induced twigs and controls revealed that only the amounts of (E)--farnesene were significantly higher in the volatile blend of the oviposition-induced twigs. Volatiles from pine twigs treated with jasmonic acid (JA) also attract the egg parasitoid. No qualitative differences were detected when comparing the composition of the headspace of JA-treated pine twigs with the volatile blend of untreated control twigs. JA-treated pine twigs released significantly higher amounts of (E)--farnesene. However, the JA treatment induced a significant increase of the amount of further terpenoid components. The release of terpenoids by pine after wounding, egg deposition, and JA treatment is discussed with special respect to (E)--farnesene.     

Enantiomeric Composition of Monoterpene Hydrocarbons in Some Conifers and Receptor Neuron Discrimination of α-Pinene and Limonene Enantiomers in the Pine Weevil, Hylobius abietis

The enantiomeric composition of seven monoterpene hydrocarbons in headspace volatiles of spruce sawdust and seedlings (Picea abies), pine seedlings (Pinus sylvestris), and branches of juniper (Juniperus communis) was determined by gas chromatographic separation on a -Cyclodextrin column. For the six monoterpenes, -pinene, camphene, -pinene, sabinene, limonene, and -phellandrene, both enantiomers were present, whereas for 3-carene only the (+)-configuration was found. The amount of each enantiomer varied considerably both in relation to total amount of all of them, and for the six pairs also in relation to the opposite enantiomer. One olfactory receptor neuron in the pine weevil (Hylobius abietis) showed a strong response to -pinene when stimulated with all four headspace materials via a GC equipped with a DB-WAX column. The same neuron was subsequently tested with repeated stimulations via the GC effluent containing the (+)- or (–)-enantiomer. A marked better response to (+)- than to (–)--pinene was elicited. Another olfactory receptor neuron that responded strongly to limonene when stimulated with the spruce volatiles was tested for enantiomers of limonene. This neuron responded more strongly to (–)- than to (+)-limonene, when stimulated alternately with each of the limonene enantiomers. Discrimination between enantiomers by plant olfactory receptor neurons suggests that the enantiomeric ratios of volatile compounds may be important in host location by the pine weevil.     

Electric field assisted solid-state interfacial joining of TaC-HfC ceramics without filler

The application of ultra-high-temperature ceramics (UHTCs) demands effective ways of joining in overcoming the problems associated with the fabrication of complex-shaped components. In this study, we choose to investigate a new method of rapidly joining pre-sintered TaC and HfC ceramics without any filler material using the spark plasma sintering (SPS) technique. A well-bonded TaC–HfC interface was observed with no apparent cracking and porosity at the joint. The joining mechanisms were predominantly driven by solid-state diffusion and localized plastic deformation. The nanomechanical properties of the TaC-HfC joint are better than the HfC while comparable to that of the TaC. High-load indentation (up to 200 N) results suggest that the TaC–HfC interface is stronger than the parent UHTCs with no crack propagating at the interface. Upon comparison with the parent UHTCs, the damaged area and the average crack length at the interface, reduced up to ~94% and ~56%, respectively. This study shows that the SPS technique can also apply to joining other UHTCs without any filler, resulting in the new field of developing complex components for the thermal protection system (TPS).     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

An efficient fragile watermarking scheme with multilevel tamper detection and recovery based on dynamic domain selection

Self-recoverable fragile watermarking is meant for accurate tamper localization as well as image recovery with superior visual quality. However, most of the existing state of art approaches perform authentication and recovery on block basis owing to which the entire block is categorized as tampered in case of alteration of one or more pixels of it. This, results in staircase formation of tamper detected regions, hence lacking in accuracy. Furthermore, the visual quality of the recovered image also deteriorates as an approximate value is assigned to all the block pixels corresponding to the altered region. The proposed watermarking scheme performs both authentication and recovery pixelwise. The authentication of each pixel is done via multi level tamper detection(MLTD) through three authentication bits based on value, location and neighbourhood information. The domain for image recovery is chosen dynamically based on the content of the block, may it be in spatial domain for smooth blocks or frequency domain for the rough ones. This provides high accuracy in recovery. As the embedding of recovery information is done in the frequency domain, the imperceptibility of the watermarked image scheme remains high. Also, embedding of authentication information in the spatial domain maintains its fragile nature. Even for higher tampering ratios, the lost content is rebuilt with high peak signal to noise ratio(PSNR) of the recovered image. The probabilities of false rejection and false acceptance head towards the ideal value for most of the empirical analysis. Comparative study via metric evaluation of probability of false rejection (PFR), probability of false acceptance (PFA) and PSNR of recovered image for different standard test cover images demonstrate the efficacy of the proposed scheme over other existing state of art approaches. Further, the security of the proposed scheme remains high due to usage of multi-layered secret keys and chaos based random mapping handling worst tamper scenarios.     

Viscoelastic flow in an obstructed microchannel at high Weissenberg number

Detailed measurements of the flow instability of dilute shear-thinning viscoelastic aqueous solutions, with relatively low zero-shear viscosities, in an obstructed microchannel flow are reported. We examine the flow behaviour resulting from a 100 μm post placed in the channel centreline over a range of Reynolds numbers (\(5<Re<300\)) and Weissenberg numbers (\(20<Wi<10^3\)). Micro-particle image velocimetry measurements show the onset of an upstream instability within a Reynolds number range and at a critical elasticity number corresponding to polymer concentrations above 25 ppm of long-chain polyacrylamide. The instability results in significant local fluctuations in the flow field approaching 30 % of the mean velocity. The magnitude of the local viscosity ratio in the region upstream of the post is proposed as a driving mechanism for the instability which resembles a buckling flow. Additionally, the classical instability owing to separation and vortex formation downstream of the post in Newtonian flow is suppressed and a very long stable wake is observed extending over 10 post-diameters downstream.     

Diagnostic performance of edited 2HG MR spectroscopy of central glioma in the clinical environment

Magnetic Resonance Materials in Physics, Biology and Medicine - Oncometabolite D-2-hydroxyglutarate (2HG) is pooled in isocitrate dehydrogenase (IDH)-mutant glioma cells. Detecting 2HG by MR...     

A Multi-Criteria Route Selection Method for Vehicles Using Genetic Algorithms Based on Driver’s Preference

Wireless Personal Communications - Finding the best path between a given source and a destination in a road network is an important problem. It has its applications in various map services and...