Polyol method for the preparation of nanosized Gd2O3, boehmite and other oxides

A modified microwave-assisted polyol method was applied to prepare nanoparticulate ceramic powders of different oxides, i.e. Gd₂O₃, AlO(OH) (boehmite) and TiO₂. Due to the good dielectric properties of the utilised solvents, such as ethylene glycol, diethylene glycol and 1,4 butanediol, a significant decrease in reaction time was achieved under microwave heating. In the case of AlO(OH) and Gd₂O₃, <5 nm primary particle size were obtained. Boehmite was found to be intercalated with the solvent. The general applicability of the process is shown and the advantages in terms of properties and processibility are described. The powders thus prepared were investigated using X-ray diffractometry, electron microscopy and physisorption.     

In formation: Support for flexibility, mobility, collaboration, and coherence

This paper describes support for flexibility, mobility and collaboration in engaging with, and making sense of, information. Our focus lies on the transitions people make between different, dynamic configurations of digital and physical materials, technologies, people and spaces. The technologies we describe have been developed in partnership with landscape architects over the past two years. We show that appliances and people can come together in a way that creates scope for such transitions, collaboration, and the emergence of new ways of working.     

Wyner-Ziv coding of video: an error-resilient compression framework

This paper addresses the problem of video coding in a joint source-channel setting. In particular, we propose a video encoding algorithm that prevents the indefinite propagation of errors in predictively encoded video-a problem that has received considerable attention over the last decade. This is accomplished by periodically transmitting a small amount of additional information, termed coset information, to the decoder, as opposed to the popular approach of periodic insertion of intra-coded frames. Perhaps surprisingly, the coset information is capable of correcting for errors, without the encoder having a precise knowledge of the lost packets that resulted in the errors. In the context of real-time transmission, the proposed approach entails a minimal loss in performance over conventional encoding in the absence of channel losses, while simultaneously allowing error recovery in the event of channel losses. We demonstrate the efficacy of the proposed approach through experimental evaluation. In particular, the performance of the proposed framework is 3-4 dB superior to the conventional approach of periodic insertion of intra-coded frames, and 1.5-2 dB away from an ideal system, with infinite decoding delay, operating at Shannon capacity.     

Selective Behaviour of Honeybees in Acquiring European Propolis Plant Precursors

Honey bees harvest resins from various plant species and use them in the hive as propolis. While there have been a number of studies concerning the chemical composition of this antimicrobial product, little is known about selective behavior and bee preference when different potential plant sources of resin are available. The main objective of this paper was to investigate some aspects of behavioral patterns of honeybees in the context of resin acquisition. Samples of propolis originating from temperate zones of Europe and the supposed botanical precursors of the product were analyzed. Taxonomical markers of bud resins of two white birch species, aspen, black poplar, horse-chestnut, black alder, and Scots pine were determined through GC-MS analysis. All these trees have been reported as sources of propolis, but comparisons of the chemical composition of their bud resins with the compositions of propolis samples from seven European countries have demonstrated the presence of taxonomical markers only from black poplar, aspen, and one species of birch. This suggests selective behavior during the collection of bud resins by honeybees. To examine the causes of such selectivity, the antimicrobial properties of bud resins were determined. Horse-chestnut resins had lower antimicrobial activity than the other resins which did not differ significantly.     

Highly Enantioselective Production of (R)-Halohydrins with Whole Cells of Rhodotorula rubra KCh 82 Culture

Biotransformation of ten α-haloacetophenones in the growing culture of the strain Rhodotorula rubra KCh 82 has been carried out. Nine of the substrates underwent an effective enantioselective reduction to the respective (R)-alcohols according to Prelog’s rule, with the exception of 2-chloro-1,2-diphenylethan-1-one that was not transformed by this strain. The expected reduction proceeded without dehalogenation, leading to the respective (R)-halohydrins in high yields. The use of this biocatalyst yielded (R)-2-bromo-1-phenyl-ethan-1-ol (enantiomeric excess (ee) = 97%) and its derivatives: 4''-Bromo- (ee = 99%); 4''-Chloro- (ee > 99%); 4''-Methoxy- (ee = 96%); 3''-Methoxy- (ee = 93%); 2''-Methoxy- (ee = 98%). There were also obtained and characterized 2,4''-dichloro-, 2,2'',4''-trichloro- and 2-chloro-4''-fluoro-phenyetan-1-ol with >99% of enantiomeric excesses.     

Short communication: Validation of somatic cell score–associated loci identified in a genome-wide association study in German Holstein cattle

Recently, we identified 6 genomic loci affecting daughter yield deviations (DYD) for somatic cell score (SCS) in a genome-wide association study (GWAS) performed with German Holstein bulls. In the current study, we tested if these loci were associated with SCS in cows using their own performance data. The study was performed with 1,412 German Holstein cows, of which 483 were daughters of 71 bulls that had been used in the GWAS. We tested 10 single nucleotide polymorphisms (SNP) representing 6 genomic regions that were associated with DYD for SCS in bulls. All tested SNP were significant in cows. Seven of them, located on Bos taurus autosomes (BTA) 6, 13, and 19, had the same direction of effect as those previously reported in the bull population. The most significant associations were detected on BTA6 and BTA19, accounting for 1.8% of the total genetic variance. The major allele of the 2 SNP on BTA6 and the minor allele of the 2 SNP on BTA19 were favorable for lower SCS. The differences between the homozygous genotype classes were up to 15,000 cells/mL. The verification of SNP associated with SCS in this study provides further evidence for the functional role of the linked genomic regions for immune response and contributes to identification of causative mutations. In particular, SNP with minor frequency of the favorable allele possess high potential to reduce SCS in German Holstein cattle by selection.     

Electrically Tunable Nanoporous Carbon Hybrid Actuators

A novel nanoporous carbon/electrolyte hybrid material is reported for use in actuation. The nanoporous carbon matrix provides a 3D network that combines mechanical strength, light weight, and low cost with an extremely high surface area. In contrast to lower dimensional nanomaterials, the nanoporous carbon matrix can be prepared in the form of macroscopic monolithic samples that can be loaded in compression. The hybrid material is formed by infiltrating the free internal pore volume of the carbon with an electrolyte. Actuation is prompted by polarizing the internal interfaces via an applied electric bias. It is found that the strain amplitude is proportional to the Brunauer‐Emmett‐Teller (BET) mass specific surface area, with reversible volume strain amplitudes up to the exceptionally high value of 6.6%. The mass‐specific strain energy density compares favorably to reported values for piezoceramics and for nanoporous metal actuators.     

Compton profiles of MoP and WP: Validation of second order generalized gradient approximation

Recently, Zhao and Truhlar (J. Chem. Phys. 128, 184109, 2008) have constructed second order generalized gradient approximation (SOGGA) within the density functional theory. The authors have successfully tested the performance of SOGGA by computing lattice constants, cohesive energies, bond distances and few energetic quantities of different solids and molecules. In this paper, to establish the usefulness of SOGGA in deducing the momentum densities, we have compared our experimental Compton profiles of MoP and WP with those computed using GGA and SOGGA within density functional theory. It is seen that SOGGAPBE based Compton profiles of both the samples are in better agreement with the corresponding experimental data than those derived from BPBE-GGA. In addition, energy bands, density of states and relative nature of bonding in both the phosphides is explained in terms of equal-valence-electron-density profiles and Mulliken’s population analysis.     

Proofs, Programs, Processes

The objective of this paper is to provide a theoretical foundation for program extraction from inductive and coinductive proofs geared to practical applications. The novelties consist in the addition of inductive and coinductive definitions to a realizability interpretation for first-order proofs, a soundness proof for this system, and applications to the synthesis of non-trivial provably correct programs in the area of exact real number computation. We show that realizers, although per se untyped, can be assigned polymorphic recursive types and hence represent valid programs in a lazy functional programming language such as Haskell. Programs extracted from proofs using coinduction can be understood as perpetual processes producing infinite streams of data. Typical applications of such processes are computations in exact real arithmetic. As an example we show how to extract a program computing the average of two real numbers w.r.t. the binary signed digit representation.