Ilmenite phase nickel titanate nanowhiskers as highly sensitive LPG sensor at room temperature

The NiTiO₃ nanoparticles with ilmenite phase were synthesized by the sol gel method and investigated for sensing of various volatile organic compounds. The resistive type sensing by NiTiO₃ towards LPG was not reported earlier where the sensor showed fair response towards hydrogen sulfide gas, but the sensitivity towards LPG was very high. The response % for 150 ppm of LPG was approximately 3200% at room temperature. The high response towards LPG was due to the presence of some amount of rutile TiO₂ in the composites. The response and recovery times of these sensors were very less (about 2 s) which could be attributed to the whiskers like structure of NiTiO₃.     

Modelling of wind energy‐based microgrid system implementing MMC

Nowadays, renewable energy systems have come up with more potential in power generation so as to meet the power demand. Among all the renewable systems, the wind energy generating system is believed to be at the peak. However, the wind energy‐based microgrid system is associated with many problems such as fluctuations in output voltage due to the fluctuated wind speeds and harmonics generations in the system. To address these issues, this article proposes a new method in order to achieve harmonic mitigation across its output by maintaining constant voltage. Nevertheless, particular attention has been given to the form and function of modular multilevel converter with multi‐winding transformer connected to the grid. Modular multilevel converter has been implemented with an advanced voltage controller tuned to control the voltage at its output. Also, a new system topology has been introduced with two wind turbines that are interconnected to multi‐winding transformer through asynchronous generators. The proposed system has been implemented with constant and variable wind speeds, and their respective results have also been analysed. The proposed scheme shows its effectiveness by theoretical calculations, verified by simulation and experimental results. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of rice analogues using extrusion technology

Rice is considered as staple food in many parts of the world. An issue of concern is the breakage of rice kernels in milling processes, and these broken kernels are not generally accepted by consumers. These broken kernels can be mixed with some desired additives to improve their quality and extruded for the preparation of reconstituted rice kernels or rice analogues. Various studies have been conducted for the preparation of the rice analogues in the past few decades, and recently attempts have been made to fortify these analogues with protein, certain vitamins and minerals. The main features such as colour, shape, size, texture, and cooking characteristics and cooking time of these rice‐like grains can be tailored to the requirements of specific applications by modification of the extrusion parameters. Various organisations, such as Wuxi NutriRice Co. (DSM/Buhler) and China National Cereals, Oils and Foodstuffs Corporate (COFCO), Superlative Snacks Inc., Vigui and PATH, have utilised this technique to prepare fortified and reconstituted rice. Studies have shown that it is possible to improve the nutritional quality of rice by fortified rice analogues. This article reviews research results of the many approaches to the formation of fortified rice analogues by extrusion‐based technologies.     

Electrochemical impedance spectroscopic characterization of the oxide film formed over low modulus Ti–35.5Nb–7.3Zr–5.7Ta alloy in phosphate buffer saline at various potentials

Electrochemical impedance spectroscopic characterization of the low modulus Ti–35.5Nb–7.3Zr–5.7Ta alloy has been performed in phosphate buffer saline solution at 37 °C. Measurements were performed at various immersion intervals up to 720 h at OCP and also at various anodic potentials up to 2 V. The alloy exhibits a two time constant impedance response at the OCP and a one-time constant response at anodic potentials in the passive region. The thickness of the oxide film formed has been evaluated and the electrochemical interpretation of the results has been reported. Cyclic potentiodynamic profile of the alloy displays valve metal characteristics and the presence of a wide passive region that extends up to the maximum potential value of 2 V studied.     

Transistor Paint: Environmentally Stable N‐alkyldithienopyrrole and Bithiazole‐Based Copolymer Thin‐Film Transistors Show Reproducible High Mobilities without Annealing

New solution processable 4‐(2‐hexyldecan)‐4H‐bisthieno[2,3‐d:3′,2′‐b]pyrrole and 4,4′‐dialkyl‐2,2′‐bithiazole‐based copolymers (PBTzDTPs) are synthesized with excellent FET performance. These novel copolymers have considerable potential in printable electronics as they have high charge carrier mobilities, excellent air stability, good solution processibility, and no requirement for post‐deposition thermal annealing, all requirements for this field of application. The thin film transistors fabricated from PBTzDTPs achieve field effect mobilities as high as 0.14 cm² V^?1 s^?1 with current on/off ratios up to 10⁶ without thermal annealing. In addition, the devices exhibit stable performance in air, showing no significant degradation over 60 days. Moreover, the polymers described here provide an excellent example of the systems in which higher mobility performance does not require higher crystalline, long‐range ordered structures. Such a system appears to be particularly promising for rapid fabrication techniques, where kinetic conditions usually prevent the development of long‐range order.     

Study of Temperature Dependence of Electrode–Glass Ceramic Interface Using Impedance Spectroscopy

The electrical behavior of strontium titanate borosilicate glass ceramics (SrO.TiO₂- 2SiO₂.B₂O₃) with additives K₂O, La₂O₃, CoO and Nb₂O₅ was studied by using Impedance Spectroscopy as a function of temperature and composition. An equivalent circuit model having three parallel RC's connected in series with a capacitor C₄ could represent the data well. By comparing the complex modulus plots with simulated ones and looking at the values of the time constants these RC's were attributed to represent crystalline, glassy and glass-crystal interface regions of the glass- ceramic whereas C₄ represented the glass-ceramic sample and contact electrode interface. When the glass ceramic sample contained only SrTiO₃ crystalline phase and the remaining glassy matrix, the interface capacitance showed an Arrhenius type of nature with an activation energy (0.11 ± 0.04) eV and when the glass- ceramic sample contained number of crystalline phases no clear cut trend appeared. These findings are useful in selecting suitable electrodes for applications as well as in deciding upon experimental techniques for measurement of dielectric constants of materials.