Formation of Heterocyclic Amines in Salami and Ham Pizza Toppings During Baking of Frozen Pizza

Heterocyclic amines (HAs) are formed as Maillard reaction products in the crust of meat products during heating processes. Two typical pizza toppings—salami and cooked ham—were analyzed for the presence of HAs after baking frozen pizzas at top and bottom temperatures of 250 and 230 °C, respectively. After baking pizza slices for 12 min, MeIQx (2‐amino‐3,4,8‐trimethylimidazo[4,5‐f]quinoxaline; 0.2 ng/g), 4,8‐DiMeIQx (2‐amino‐3,8‐dimethylimidazo[4,5‐f]quinoxaline; 0.5 ng/g), PhIP (2‐amino‐1‐methyl‐6‐phenylimidazo[4,5‐b]pyridine; 0.2 ng/g), norharman (4.5 ng/g), and harman (2.5 ng/g) were found in the ham toppings, whereas only the comutagenic norharman (107.4 ng/g) and harman (11.4 ng/g) were found in the salami toppings. The content of MeIQx and 4,8‐DiMeIQx in ham increased from 0.3 to 1.8 ng/g and 0.8 to 1.6 ng/g, respectively, when the recommended baking time was increased from 15 min (manufacturer's specification) to 18 min at 230 °C. MeIQx was formed in salami when the heating time was extended to 18 min. Moreover, higher concentrations of PhIP in salami or ham slices were found when baking temperatures were 250 °C rather than 230 °C (baking time of 12 min). However, sensory tests showed that panelists preferred longer‐baked pizzas due to an increased crispiness. Thus, results show that a substantial formation of HAs may occur in pizza toppings such as ham and salami, with ham being particularly susceptible when compared to salami. Formation of HAs increases with increasing baking time and temperature. The occurrence of the cupping of ham or salami slices during baking may also increase the formation of HAs.     

Analysis of Volatiles Induced by Oviposition of Elm Leaf Beetle Xanthogaleruca luteola on Ulmus minor

Egg deposition of the elm leaf beetle Xanthogaleruca luteola causes the emission of volatiles from its food plant, Ulmus minor. These volatiles are exploited by the egg parasitoid, Oomyzus gallerucae, to locate its host. In contrast to other tritrophic systems, the release of volatiles is not induced by feeding but by egg deposition. Previous investigations showed that the release is systemic and can be triggered by jasmonic acid. Comparison of headspace analysis revealed similarities in the blend of volatiles emitted following egg deposition and feeding. The mixture consists of more than 40 compounds; most of the substances are terpenoids. Leaves next to those carrying eggs emit fewer compounds. When treated with jasmonic acid, leaves emit a blend that consists almost exclusively of terpenoids. Dichloromethane extracts of leaves treated with jasmonic acid were also investigated. After separation of extracts of jasmonate induced elm leaves on silica, we obtained a fraction of terpenoid hydrocarbons that was attractive to the parasitoids. This indicates that jasmonic acid stimulates the production of terpenoid hydrocarbons that convey information of egg deposition to the parasitoid.     

Computer-Aided Search for 5-Arylideneimidazolone Anticancer Agents Able To Overcome ABCB1-Based Multidrug Resistance

ABCB1 modulation is an interesting strategy in the search for new anticancer agents that can overcome multidrug resistance (MDR). Hence, 17 new 5-arylideneimidazolones containing an amine moiety, as potential ABCB1 inhibitors, were designed, synthesized, and investigated. The series was tested in both parental (PAR) and multidrug-resistant (MDR) ABCB1-overexpressing T-lymphoma cancer cells using cytotoxicity assays. The ABCB1-modulating activity was examined in rhodamine 123 accumulation tests, followed by Pgp-Glo™ Assay to determine the influence of the most active compounds on ATPase activity. Lipophilic properties were assessed both, in silico and experimentally (RP-TLC). Pharmacophore-based molecular modelling toward ABCB1 modulation was performed. The studies allowed the identification of anticancer agents (p-fluorobenzylidene derivatives) more potent than doxorubicin, with highly selective action on MDR T-lymphoma cells (selectivity index >40). Most of the investigated compounds showed ABCB1-modulating action; in particular, two 5-benzyloxybenzylidene derivatives displayed activity nearly as strong as that of tariquidar.     

Complement-Opsonized Nano-Carriers Are Bound by Dendritic Cells (DC) via Complement Receptor (CR)3, and by B Cell Subpopulations via CR-1/2, and Affect the Activation of DC and B-1 Cells

The development of nanocarriers (NC) for biomedical applications has gained large interest due to their potential to co-deliver drugs in a cell-type-targeting manner. However, depending on their surface characteristics, NC accumulate serum factors, termed protein corona, which may affect their cellular binding. We have previously shown that NC coated with carbohydrates to enable biocompatibility triggered the lectin-dependent complement pathway, resulting in enhanced binding to B cells via complement receptor (CR)1/2. Here we show that such NC also engaged all types of splenic leukocytes known to express CR3 at a high rate when NC were pre-incubated with native mouse serum resulting in complement opsonization. By focusing on dendritic cells (DC) as an important antigen-presenting cell type, we show that CR3 was essential for binding/uptake of complement-opsonized NC, whereas CR4, which in mouse is specifically expressed by DC, played no role. Further, a minor B cell subpopulation (B-1), which is important for first-line pathogen responses, and co-expressed CR1/2 and CR3, in general, engaged NC to a much higher extent than normal B cells. Here, we identified CR-1/2 as necessary for binding of complement-opsonized NC, whereas CR3 was dispensable. Interestingly, the binding of complement-opsonized NC to both DC and B-1 cells affected the expression of activation markers. Our findings may have important implications for the design of nano-vaccines against infectious diseases, which codeliver pathogen-specific protein antigen and adjuvant, aimed to induce a broad adaptive cellular and humoral immune response by inducing cytotoxic T lymphocytes that kill infected cells and pathogen-neutralizing antibodies, respectively. Decoration of nano-vaccines either with carbohydrates to trigger complement activation in vivo or with active complement may result in concomitant targeting of DC and B cells and thereby may strongly enhance the extent of dual cellular/humoral immune responses.     

Tyrp1 Mutant Variants Associated with OCA3: Computational Characterization of Protein Stability and Ligand Binding

Oculocutaneous albinism type 3 (OCA3) is an autosomal recessive disorder caused by mutations in the TYRP1 gene. Tyrosinase-related protein 1 (Tyrp1) is involved in eumelanin synthesis, catalyzing the oxidation of 5,6-dihydroxyindole-2-carboxylic acid oxidase (DHICA) to 5,6-indolequinone-2-carboxylic acid (IQCA). Here, for the first time, four OCA3-causing mutations of Tyrp1, C30R, H215Y, D308N, and R326H, were investigated computationally to understand Tyrp1 protein stability and catalytic activity. Using the Tyrp1 crystal structure (PDB:5M8L), global mutagenesis was conducted to evaluate mutant protein stability. Consistent with the foldability parameter, C30R and H215Y should exhibit greater instability, and two other mutants, D308N and R326H, are expected to keep a native conformation. SDS-PAGE and Western blot analysis of the purified recombinant proteins confirmed that the foldability parameter correctly predicted the effect of mutations critical for protein stability. Further, the mutant variant structures were built and simulated for 100 ns to generate free energy landscapes and perform docking experiments. Free energy landscapes formed by Y362, N378, and T391 indicate that the binding clefts of C30R and H215Y mutants are larger than the wild-type Tyrp1. In docking simulations, the hydrogen bond and salt bridge interactions that stabilize DHICA in the active site remain similar among Tyrp1, D308N, and R326H. However, the strengths of these interactions and stability of the docked ligand may decrease proportionally to mutation severity due to the larger and less well-defined natures of the binding clefts in mutants. Mutational perturbations in mutants that are not unfolded may result in allosteric alterations to the active site, reducing the stability of protein-ligand interactions.     

Novel Biomolecules in the Pathogenesis of Gestational Diabetes Mellitus

Gestational diabetes mellitus (GDM) is one of the most common metabolic diseases in pregnant women. Its early diagnosis seems to have a significant impact on the developing fetus, the course of delivery, and the neonatal period. It may also affect the later stages of child development and subsequent complications in the mother. Therefore, the crux of the matter is to find a biopredictor capable of singling out women at risk of developing GDM as early as the very start of pregnancy. Apart from the well-known molecules with a proven and clear-cut role in the pathogenesis of GDM, e.g., adiponectin and leptin, a potential role of newer biomolecules is also emphasized. Less popular and less known factors with different mechanisms of action include: galectins, growth differentiation factor-15, chemerin, omentin-1, osteocalcin, resistin, visfatin, vaspin, irisin, apelin, fatty acid-binding protein 4 (FABP4), fibroblast growth factor 21, and lipocalin-2. The aim of this review is to present the potential and significance of these 13 less known biomolecules in the pathogenesis of GDM. It seems that high levels of FABP4, low levels of irisin, and high levels of under-carboxylated osteocalcin in the serum of pregnant women can be used as predictive markers in the diagnosis of GDM. Hopefully, future clinical trials will be able to determine which biomolecules have the most potential to predict GDM.     

Interleukins 6 and 15 Levels Are Higher in Subcutaneous Adipose Tissue,but Obesity Is Associated with Their Increased Content in Visceral Fat Depots

Excess adiposity is associated with chronic inflammation, which takes part in the development of obesity-related complications. The aim of this study was to establish whether subcutaneous (SAT) or visceral (VAT) adipose tissue plays a major role in synthesis of pro-inflammatory cytokines. Concentrations of interleukins (IL): 1β, 6, 8 and 15 were measured at the protein level by an ELISA-based method and on the mRNA level by real-time PCR in VAT and SAT samples obtained from 49 obese (BMI > 40 kg/m²) and 16 normal-weight (BMI 20–24.9 kg/m²) controls. IL-6 and IL-15 protein concentrations were higher in SAT than in VAT for both obese (p = 0.003 and p < 0.0001, respectively) and control individuals (p = 0.004 and p = 0.001, respectively), while for IL-1β this was observed only in obese subjects (p = 0.047). What characterized obese individuals was the higher expression of IL-6 and IL-15 at the protein level in VAT compared to normal-weight controls (p = 0.047 and p = 0.016, respectively). Additionally, obese individuals with metabolic syndrome had higher IL-1β levels in VAT than did obese individuals without this syndrome (p = 0.003). In conclusion, concentrations of some pro-inflammatory cytokines were higher in SAT than in VAT, but it was the increased pro-inflammatory activity of VAT that was associated with obesity and metabolic syndrome.     

Strength of pure alumina ceramics above 1 GPa

Up to now, commercially available alumina ceramics were claimed to have strength between 400 and 550 MPa. However, our study shows strength ~ 2 times higher for commercially available alumina than commonly believed. The average and characteristic strength, measured on 31 pure alumina ceramic discs by ball on three balls (B3B) test, were 1205 ± 93 MPa and 1257 MPa, respectively, with a Weibull modulus of m = 11.8. Tested specimens were in form of discs with a diameter of 5 mm and thickness 0.5 mm. The grain size distribution of the alumina is bimodal with an average grain size of ~ 850 nm measured at the surface. The fracture reveals a mixed transgranular / intergranular failure mode. To avoid incorporation of additional flaws, the discs were tested as sintered. The characteristic flexural strength measured in B3B was recalculated according to Weibull theory for standard 4-point bending bars of size 3 × 4 × 45 mm as bend 856 MPa. The measured strength of nearly 900 MPa shows the potential of strength for high purity alumina ceramics.