Resonance and nonresonant laser ionization of sputtered uranium atoms from thin films and single microparticles: evaluation of a combined system for particle trace analysis

The resonance and nonresonant laser ionization of uranium atoms sputtered from thin metal films and individual micrometer-size uranium oxide particles, respectively, was studied to evaluate a new setup for the analysis of actinide-containing micrometer-size particles. Experiments using nonresonant (193-nm) ionization of atoms and molecules sputtered from micrometer-size uranium oxide particles have shown that the uranium detection efficiencies for sputtered neutral atoms are approximately 2 orders of magnitude higher than for secondary ions. In uranium particles of 0.5-microm diameter, 6 x 10(6) atoms of 235U were easily detected and the isotopic ratio of 235U/238U = 0.0048 +/- 4.6% is in excellent agreement with the certified value. The use of two-color, two-step resonance ionization of the sputtered neutral uranium atoms from thin films was investigated. Several excitation schemes were tested, and a significant population of several low-lying metastable states after ion sputtering was observed. Autoionizing states for double-resonant ionization were determined, and the high selectivity of ionization schemes involving these autoionizing states was illustrated by comparing the flight-time distributions of different sputtered species obtained both by resonance and nonresonant multiphoton (355-nm) laser postionization. Ideally, the options for resonance as well as nonresonant ionization would be combined in a single setup, to obtain a large gain in sensitivity and selectivity. Thus, information about the main components as well as specific isotopic information of a trace element could be obtained from the same single particle.     

Elution-extrusion countercurrent chromatography. Use of the liquid nature of the stationary phase to extend the hydrophobicity window

Countercurrent chromatography (CCC) is a liquid chromatography technique with a liquid stationary phase. Taking advantage of the liquid nature of the stationary phase, it is possible to perform unique operations not possible in classical liquid chromatography with a solid stationary phase. It is easy to avoid any solute-irreversible absorption in the CCC column. If the retention volumes of solutes become too high, the dual mode will be used. The roles of the phases are reversed. The stationary phase becomes the mobile phase, and the CCC column is started again. The solutes elute rapidly in what was previously the stationary phase. The theoretical basis of the dual-mode method is recalled. The dual-mode method is a discontinuous method. The separation should be stopped when the phase switch is performed. The elution-extrusion procedure is another way to avoid any irreversible adsorption of solutes in the column. The method uses the fact that the liquid volumes occupied by the solutes highly retained inside the column can be orders of magnitude lower than the mobile-phase volume that would be needed to elute them. The elution-extrusion method also has two steps: the first step is a regular CCC chromatogram. Next, the stationary phase containing the partially separated hydrophobic solutes is extruded out of the column in a continuous way using the liquid stationary phase. The theory of the process is developed and compared to the dual-mode theory. Alkylbenzene homologues are experimentally used as model compounds with the heptane/methanol/water biphasic liquid system to establish the theoretical treatment and compare the performance of two types, hydrodynamic and hydrostatic, of CCC columns. It is shown that the method can dramatically boost the separation power of the CCC technique. An apparent efficiency higher than 20 000 plates was obtained for extruded octylbenzene and a 160-mL hydrodynamic CCC column with less than 500 plates when conventionally used.     

Physiological functions of FMRFamide-like peptides (FLPs) in crustaceans

Neuropeptides play important roles in chemical signalling in the central and peripheral nervous systems. One of the largest families of neuropeptides is that of the FMRFamide-like peptides (FLPs). This paper reviews what is known about the physiological functions of FLPs in crustaceans, focussing on the cardiovascular, digestive and neuromuscular systems.     

Induced maturation of frog mast cells by nerve growth factor during ontogenesis

The effect of nerve growth factor (NGF) on ontogenesis of frog mast cells was investigated in vivo by histochemical, morphometric, and ultrastructural analysis. Three groups of tadpoles at various stages of development were used. In the first group, the larvae received i.p. injections of 1 ng NGF/g; the second group received 10 ng NGF/g, while the control group received only the vehicle. The first recognizable mast cells arose symmetrically in the tongue at stage 26 of Witschi's standard table. At stages 26 and 29, the mast cell number in the NGF-injected tadpoles was significantly higher than the control group. From stage 29 onward, the mast cell number rapidly increased in all groups. No significant differences in mast cell number were observed between the control group and the NGF-injected groups at stages 31 and 33. Electron microscopy revealed that at metamorphic climax (stage 33), the mast cells in the NGF-treated groups were more mature than those in the control group. Therefore, nerve growth factor at early stages of tadpole development is likely to induce differentiation of mast cell precursors, while at later stages it is likely to induce maturation of immature mast cells. The close anatomical association between mast cells and perineurium, observed during nerve development, is intriguing. Already in the early stages of nerve development, the mast cells form a network around Schwann cell-axon complexes, together with the perineurial cells. At climax, the mast cells are located between the perineurial layers, suggesting that they may play a role in the tissue-nerve barrier of the perineurium. Nerve growth factor also seems to induce perineurial cell maturation.     

Congruence in the performance of model nitrifying activated sludge plants located in Germany,Scotland and Spain

A laboratory model nitrifying activated sludge plant treating OECD synthetic sewage was designed and constructed by each of three laboratories in Germany, Scotland and Spain in order to produce a sludge inoculum for 5 rapid toxicity bioassays. The plants were run for 3 years and produced sludge for the microbially based bioassays Vibrio fischeri bioluminescence, ATP luminescence and respiration, and, nitrification and enzyme inhibition. Although the initial sludge inoculum for the plants differed, as did some of the running conditions such as temperature regime, the sludge produced within the different countries had similar characteristics with respect to sludge age, total suspended solids and volatile suspended solids. Nitrification was generally maintained over the 3-year period although there were occasions when the process was inconsistent. Nitrification recovery was afforded by reseeding with a nitrifying sludge from a local wastewater treatment works (WWTW) or imposition of starvation conditions for a period of time. The sludge produced was used to carry out toxicity testing and results compared well with those using sludge from a WWTW. Overall, the use of sludge generated in the laboratory could be used for toxicity testing negating the need to resort to the use of natural WWTW sludge, which may contain a range of toxic substances due to uncontrolled industrial and domestic inputs and an unbalanced microbial consortium.     

“Smart” polymeric nanospheres as new materials for possible biomedical applications

Novel random terpolymers of N-isopropylacrylamide (NIPAM), sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS), and cinnamoyloxyethylmethacrylate (CEMA) were synthesized by free radical copolymerization using AIBN as an initiator. Five terpolymers were obtained by copolymerization of the monomer mixtures containing a fixed amount of 10 mol % of AMPS while the content of CEMA ranged from 5 to 25 mol % and was changed in 5 mol % increments. The terpolymers obtained are water-soluble. Because of their amphiphilic nature they undergo self-organization in the aqueous solution with the formation of micelles capable of solubilizing sparingly water soluble organic compounds, such as drugs. The terpolymers are susceptible to three external stimuli, i.e. temperature, ionic strength and UV light. Due to the presence of NIPAM in the terpolymers they display the lower critical solution temperature (LCST), the presence of AMPS makes them sensitive to the ionic strength of the solution, while the light-responsiveness of the terpolymers is due to the presence of cinnamoyl chromophores, which undergo photodimerization when irradiated with UV light at about 280 nm. Application of any of these stimuli alone or in combination with other stimuli allows changing the copolymer properties in a controlled way.     

Temperature and emissivity separation from ASTER data for low spectral contrast surfaces

The performance of Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) thermal infrared (TIR) data product algorithms was evaluated for low spectral contrast surfaces (such as vegetation and water) in a test site close to Valencia, Spain. Concurrent ground measurements of surface temperature, emissivity, and atmospheric radiosonde profiles were collected at the test site, which is a thermally homogeneous area of rice crops with nearly full vegetation cover in summer. Using the ground data and the local radiosonde profiles, at-sensor radiances were simulated for the ASTER TIR channels and compared with L1B data (calibrated at-sensor radiances) showing discrepancies up to 3% in radiance for channel 10 at 8.3 μm (equivalently, 2.5 °C in temperature or 7% in emissivity), whereas channel 13 (10.7 μm) yielded a closer agreement (maximum difference of 0.5% in radiance or 0.4 °C in temperature). We also tested the ASTER standard products of land surface temperature (LST) and spectral emissivity generated with the Temperature-Emissivity Separation (TES) algorithm with standard atmospheric correction from both global data assimilation system profiles and climatology profiles. These products showed anomalous emissivity spectra with lower emissivity values and larger spectral contrast (or maximum-minimum emissivity difference, MMD) than expected, and as a result, overestimated LSTs. In this work, a scene-based procedure is proposed to obtain more accurate MMD estimates for low spectral contrast materials (vegetation and water) and therefore a better retrieval of LST and emissivity with the TES algorithm. The method uses various gray-bodies or near gray-bodies with known emissivities and assumes that the calibration and atmospheric correction performed with local radiosonde data are accurate for channel 13. Taking the channel 13 temperature (atmospherically and emissivity corrected) as the true LST, the radiances for the other channels were simulated and used to derive linear relationships between ASTER digital numbers and at-ground radiances for each channel. The TES algorithm was applied to the adjusted radiances and the resulting products showed a closer agreement with the ground measurements (differences lower than 1% in channel 13 emissivities and within ± 0.3 °C in temperature for rice and sea pixels).     

Take care! The evaluation of a team-based burnout intervention program for oncology care providers.

In this quasi-experimental study among staff of 29 oncology wards, the authors evaluated the effects of a team-based burnout intervention program combining a staff support group with a participatory action research approach. Nine wards were randomly selected to participate in the program. Before the program started (Time 1), directly after the program ended (Time 2), and 6 months later (Time 3), study participants filled out a questionnaire on their work situation and well-being. Results of multilevel analyses showed that staff in the experimental wards experienced significantly less emotional exhaustion at both Time 2 and Time 3 and less depersonalization at Time 2, compared with the control wards. Moreover, changes in burnout levels were significantly related to changes in the perception of job characteristics over time. (PsycINFO Database Record (c) 2010 APA, all rights reserved)