Oxygen dependency of retinal adhesion

PURPOSE: Normal retina is firmly attached to the retinal pigment epithelium, but the force of this adhesion drops precipitously within the first 2-3 min after enucleation. The purpose was to study metabolic factors that might be relevant to this postmortem failure of adhesion. METHODS: Dutch rabbit retina was manually peeled from the retinal pigment epithelium on strips of enucleated eyecup within a 37 degrees C bath. Retinal adhesiveness was measured by observing the amount of retinal pigment epithelium that remained adherent to the retina. RESULTS: Autologous whole blood in place of salt solution retarded the decrease in adhesiveness. A solution of hemoglobin alone was similarly effective, whereas methemoglobin solution failed to help the persistence of retinal adhesion. Bubbling oxygen into the salt solution and circulating it to avoid oxygen depletion at the tissue boundary also proved effective at sustaining retinal adhesiveness. Eyes made ischemic in vivo for 5 min or longer, by elevating intraocular pressure, showed virtually no retinal adhesion when enucleated immediately thereafter. However, eyes made ischemic for 10 min, but allowed to regain circulation for 5 min before enucleation, showed a return of retinal adhesiveness to 80% of normal. CONCLUSIONS: Oxidative metabolism is critical to the maintenance of retinal adhesiveness, and the effects of oxygen deprivation on adhesion are reversible within a certain time period.     

Production of a TiN film with nanoscale particle size by a combined method of plasma-alloy reaction and spray deposition

On leave from: Honda Research and Development Co., Ltd, Wako 351-01, Japan.     

Advantages of CDMA and spread spectrum techniques over FDMA andTDMA in cellular mobile radio applications

A unified theoretical method for the calculation of the radio capacity of multiple-access schemes such as FDMA (frequency-division multiple access), TDMA (time-division multiple access), CDMA (code-division multiple access) and SSMA (spread-spectrum multiple access) in noncellular and cellular mobile radio systems is presented for AWGN (additive white Gaussian noise) channels. The theoretical equivalence of all the considered multiple-access schemes is found. In a fading multipath environment, which is typical for mobile radio applications, there are significant differences between these multiple-access schemes. These differences are discussed in an illustrative manner revealing several advantages of CDMA and SSMA over FDMA and TDMA. Novel transmission and reception schemes called coherent multiple transmission and coherent multiple reception are briefly presented     

Preliminary studies using hybrid mediated electrochemical oxidation (HMEO) for the removal of persistent organic pollutants (POPs).

This study investigates the hybrid mediated electrochemical oxidation (HMEO) technology, which is a newly developed non thermal electrochemical oxidation process for organic destruction. A combination of ozone and ultrasonication processes to the mediated electrochemical oxidation (MEO) process is termed as hybrid mediated electrochemical oxidation. The electrochemical cell was developed in this laboratory. In the present study, several organic compounds, such as phenol, benzoquinone and ethylenediaminetetraacetic acid (EDTA), were chosen as the model organic pollutants to be destructed by the hybrid process. The organic destruction was monitored based on the CO2 generation and total organic carbon (TOC) reduction. The HMEO process was found to be extremely effective in the destruction of all the target organics chosen in this study. The information obtained from this study will provide an insight in adopting this technique for dealing with more recalcitrant organics (POPs).     

Kinetics of zinc oxide formation from zinc sulfide by reaction with lime in the presence of water vapor

A novel reaction scheme for transforming certain metal sulfides to the corresponding oxides has been developed. In this process, steam oxidizes the sulfide into the oxide, and the hydrogen sulfide produced reacts with lime to form calcium sulfide and regenerate steam. There is no net consumption or generation of gaseous species. Thus, the overall reaction can be carried out in a closed system as far as the gas phase is concerned. This eliminates the possibility of emitting hydrogen sulfide out of the reactor. Only certain metal sulfides are thermodynamically amenable to this treatment. In this paper, the reaction of ZnS to ZnO by this scheme is described, together with a detailed formulation of the rate equation for the overall reaction based on the kinetics of the component gas-solid reactions. Although the present work was done with CaO, other suitable oxides may be used in its place. A further potential application of this process is to the selective oxidation of certain sulfide(s) from complex sulfide ores as a treatment prior to the separation of minerals.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Single fundamental mode photonic crystal vertical cavity laser with improved output power

The single fundamental mode output power of photonic crystal vertical cavity lasers is improved by varying sizes of oxide apertures and defect lasing apertures. A maximum output power of 3.1 mW in the fundamental mode has been achieved with a new fabrication process that involves only focused ion beam etching to create holes in selectively oxidised VCSELs.     

Acidogenic fermentation of blended food‐waste in combination with primary sludge for the production of volatile fatty acids

The performance of a laboratory‐scale anaerobic acidogenic fermenter fed with a mixture of blended kitchen food‐waste and primary sludge from a sewage treatment plant was investigated for the production of volatile fatty acids (VFA). The operating variables for acidogenic fermentation were kitchen food‐waste content (10 and 25 wt %), hydraulic retention time (HRT: 1, 3 and 5 days), temperature (ambient: 18 ± 2 °C, and mesophilic: 35 ± 2 °C) and pH (varied from 5.2 to 6.7). The experimental results indicated that effluent VFA concentrations and VFA production rates were higher at ambient temperature than at mesophilic conditions. The net amount of VFA with 10 wt % food‐waste increased up to 920 mg dm^?3 with an increase of HRT, but contrasting results (a decrease of 2610 mg dm^?3) were found due to the conversion of VFA into biogas in the case of 25 wt % food‐waste, which increased significantly at HRT of 3–5 days. In terms of biogas composition (CO₂ and CH₄), the organic matter was converted into CO₂ through the oxidative pathway by facultative species at low temperature while mesophilic temperature and optimum pH (6.3–7.8) played a pivotal role in increasing rate of conversion of VFA into biogas by methanogenesis. Rates of VFA production and their conversion are dependent on the food‐waste content in the mixture. Yet, the higher concentration of food‐waste (25% compared with 10%) did not produce VFA proportionally due to the increased rate of conversion of VFA into gaseous products. The maximum VFA production rate (0.318 g VFA_produced g^?1 VS_fed day^?1) was achieved in the 10 wt % food‐waste at ambient temperature and at a 5‐day HRT. Copyright © 2005 Society of Chemical Industry     

Joint data rate and power allocation for lifetime maximization in interference limited ad hoc networks

In this paper, we consider the following problem in the wireless ad hoc network: Given a set of paths between source and destination, how to divide the data flow among the paths and how to control the transmission rates, times, and powers of the individual links in order to maximize the operation time of the worst network node. If all nodes are of equal importance, the operation time of the worst node is also the lifetime of the network. By solving the problem, our aim is to investigate how the network lifetime is affected by link conditions such as the maximum transmission power of a node and the peak data rate of a link. For the purpose, we start from a system model that incorporates the carrier to interference ratio (CIR) into a variable data rate of a link. With this, we can develop an iterative algorithm for the lifetime maximization, which resembles to the distributed power control in cellular systems. Numerical examples on the iterative algorithm are included to illustrate the network lifetime as a function of the maximum transmission power and the peak data rate.