Cottage Cheese Whey Ultrafiltrate Produced by Hollow Fiber Ultrafiltration,

The composition and volume of ultrafiltrate produced by hollow fiber ultrafiltration of cottage cheese whey with the Bio-Rad Bio-Fiber 50 Miniplant were studied and fitted to models. Temperature, pH, and protein concentration of the feed cheese whey, the flow rate of the feed cheese whey through the Miniplant, and the pressure differential across the membranes were the independent variables in the model fitting. Feed whey temperature and pressure differential across the membranes were the most significant variables affecting the volume of ultrafiltrate produced. Surface plots of response were generated.     

Theory and practice of ubiquitous quantitative chemical analysis using conventional computer optical disk drives

We demonstrate a new attractive approach for ubiquitous quantitative chemical or biological sensing when analog signals are acquired from conventional optical disk drives, and these signals are used for quantitative detection of optical changes of sensing films deposited on conventional CD and DVD optical disks. Our developed analytical model of the operation of this Lab-on-DVD system describes the optical response of sensing films deposited onto the read surface of optical disks by taking into account the practical aspects of system performance that include possible reagent leaching effects, water sampling (delivering) efficiency, and possible changes of the film morphology after water removal. By applying a screen-printing process, we demonstrated a laboratory-scale automated production of sensing films with an average thickness of approximately 10 microm and a thickness relative standard deviation of <3% across multiple films. Finally, we developed a system for delivery of water-sample volumes to sensing films on the disk that utilized a multifunctional jewel case assembly.     

Simple model order reduction by truncation with performance verification by fast digital simulation

The availability of fast interactive digital simulation to test the accuracy of low-order models has greatly increased the viability of trying simple truncation methods of model order reduction. The truncation technique is successfully applied in reducing a tenth-order analytical model of an electrode position controller to third-order.     

Planar AlGaAs/GaAs HBT fabricated by MOCVD overgrowth with a grownbase

A planar heterojunction bipolar transistor (HBT) with an AlGaAs emitter layer epitaxially grown onto a selectively defined grown base layer, where the base is grown with the collector as part of the original epi, is discussed. The transistors fabricated with this process exhibit good gain and output characteristics. Transistors with 7×7 μm² emitters have exhibited a DC current gain of 10 to 1000 for base doping from 1×10¹⁹ to 8×10¹⁷ cm³, respectively, and Early voltages ⩾100 V. The propagation delay of 19-stage ring oscillators was 87 ps/gate. The transistor-fabrication process was designed to be manufacturable, and the planar nature of the transistor surface should permit large-scale integration with good yields     

Influence of feeding supplements of almond hulls and ensiled citrus pulp on the milk production,milk composition,and methane emissions of dairy cows

Almond hulls and citrus pulp have been fed to dairy cows with variable responses for milk production, but no information exists on their effect on enteric methane emissions. This experiment examined the effects of dietary supplementation with either almond hulls or ensiled citrus pulp on the milk yield, milk composition, and enteric methane emissions of dairy cows. Thirty-two Holstein dairy cows in mid lactation were offered 1 of 3 diets over a 28-d experiment. Twelve cows received a control (CON) diet, 10 cows a diet containing almond hulls (ALH), and 10 cows a diet containing ensiled citrus pulp (CIT). All cows were offered 6.0 kg of dry matter (DM)/d of crushed corn, 2.0 kg of DM/d of cold-pressed canola, and 0.2 kg of DM/d of a mineral mix. In addition, cows fed the CON diet were offered 14.5 kg of DM/d of alfalfa cubes; cows fed the ALH diet were offered 10.5 kg of DM/d of alfalfa cubes and 4.0 kg of DM/d of almond hulls; and cows on the CIT diet were offered 11.5 kg of DM/d of alfalfa cubes and 3.0 kg of DM/d of ensiled citrus pulp. Milk yield was measured daily and milk composition was measured on 4 d of each week. Individual cow methane emissions were measured by a sulfur hexafluoride tracer technique on d 24 to 28 of the experiment. The mean milk yield of cows fed the CON diet (27.4 kg/d) was greater than the mean milk yield of cows fed the ALH diet (24.6 kg/cow per day), whereas the mean milk yield of cows fed the CIT diet (26.2 kg/cow per day) was not different from the mean milk yield from cows fed the other 2 diets. Dietary treatment did not influence the concentrations of milk fat, protein, and lactose or fat yields, but the mean protein yield from cows fed the CON diet (0.87 kg/d) was greater than that from cows fed the ALH diet (0.78 kg/d) but not different to those fed the CIT diet (0.85 kg/d). In general, we found no differences in the proportion of individual fatty acids in milk. The mean pH of ruminal fluid from cows offered the CON diet was not different to the pH in the ruminal fluids of cows offered the ALH or the CIT diets. The mean methane emissions (g/d) and yields (g/kg of DM intake) were not influenced by dietary treatment. These findings indicate that, although almond hulls and ensiled citrus pulp can be used as a low-cost feed supplement, almond hulls did negatively affect milk production and neither inhibited enteric methane emissions.     

Selective spatial memory impairment after right unilateral temporal lobectomy

Deficits in performance of both spatial and visual tasks are common following tissue loss in the right temporal lobe. Since spatial and visual attributes are frequently confounded in experimental tasks, we have studied patients following unilateral temporal lobectomy, in an attempt to determine which aspect mediates the observed deficits. Spatial and visual memory performance was compared in normal controls (n = 16), left temporal (LTL; n = 19) and right temporal (RTL; n = 19) lobectomy patients, by presentation of eight abstract designs in a spatial array for subsequent recall and recognition of the designs (visual memory) and recall of their spatial position (spatial memory). By varying the retention intervals for each group, all three groups were matched on both recall and recognition of the designs at sub-ceiling levels. In contrast, recall of the position of the designs (spatial memory), tested at equivalent delays to those of the visual memory tests, revealed a deficit in the RTL patients compared to both controls and LTL patients (p < 0.05). Magnetic resonance imaging (MRI) was used to quantify the extent of resection of the hippocampus and parahippocampal regions in the two patient groups and showed a significant correlation between hippocampal and parahippocampal removal and spatial memory in the RTL group only. These data support the notion of a disproportionately large involvement of the right hippocampus and adjacent regions in spatial memory.     

Novel sulfated oligosaccharides containing 3-O-sulfated glucuronic acid from king crab cartilage chondroitin sulfate K. Unexpected degradation by chondroitinase ABC

We prepared a series of oligosaccharides from king crab cartilage chondroitin sulfate K after exhaustive digestion with testicular hyaluronidase, and determined the structures of four tetrasaccharides and a pentasaccharide by fast atom bombardment mass spectrometry, high performance liquid chromatography analysis of chondroitinase AC-II digests, and 500-MHz 1H NMR spectroscopy. The tetrasaccharides shared the common core structure GlcAbeta1-3GalNAcbeta1-4GlcAbeta1-3GalNAc with various sulfation profiles. One structure was GlcAbeta1-3GalNAc(4S)beta1-4GlcAbeta1-3GalNAc(4S), whereas three of them have the following hitherto unreported structures including a novel glucuronate 3-O-sulfate: GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcAbeta1-3GalNAc(4S), GlcAbeta1-3GalNAc(4S)beta1-4GlcA(3S)beta1-3GalNAc(4S), and GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcA(3S)beta1-3GalNAc(4S), where 3S or 4S represents 3-O- or 4-O-sulfate, respectively. The structure of the pentasaccharide was determined as GlcA(3S)beta1-3GalNAc(4S)beta1-4GlcA(3S)beta1- 3GalNAc(4S)beta1-4GlcA. Chondroitinase ABC digestion of the tetrasaccharides with GlcA(3S) at the internal position destroyed the disaccharide unit containing GlcA(3S) derived from the reducing side and resulted in only the disaccharide unit from the non-reducing side. In contrast, these tetrasaccharides remained totally resistant to chondroitinase AC-II. The results indicated that it is necessary to reevaluate the disaccharide composition of chondroitin sulfate poly- or oligosaccharides purified from various biological sources, since they were usually determined after chondroitinase ABC digestion. It is probable that the structures containing GlcA(3S) would not have been detected.     

Reaction and total cross sections for low energy pi + and pi - on isospin zero nuclei

We calculated the electrostatic force between a planar interface, such as a planar-supported lipid bilayer membrane, and the tip of a stylus on which another lipid bilayer or some other biomacromolecular system might be deposited. We considered styli with rounded tips as well as conical tips. To take into account the effect of dynamical hydrogen-bonded structures in the aqueous phase, we used a theory of nonlocal electrostatics. We used the Derjaguin approximation and identified the systems for which its use is valid. We pointed out where our approach differs from previous calculations and to what extent the latter are inadequate. We found that 1) the nonlocal interactions have significant effects over distances of 10-15 A from the polar zone and that, at the surface of this zone, the effect on the calculated force can be some orders of magnitude; 2) the lipid dipoles and charges are located a distance L from the hydrophobic layer in the aqueous medium and this can have consequences that may not be appreciated if it is ignored; 3) dipoles, located in the aqueous region, can give rise to forces even though the polar layer is unchanged, and if this is ignored the interpretation of force data can be erroneous if an attempt is made to rationalize an observed force with a knowledge of an uncharged surface; 4) the shape of the stylus tip can be very important, and a failure to take this into account can result in incorrect conclusions, a point made by other workers; and 5) when L is nonzero, the presence of charges and dipoles can yield a force that can be nonmonotonic as a function of ionic concentration.     

Substituted glycals as probes of glycosidase mechanisms

D-Glucal and a series of substituted derivatives have been tested as substrates, inhibitors and inactivators of the Agrobacterium faecalis beta-glucosidase in order to probe structure/function relationships in this enzyme. D-Glucal is shown to be a substrate (kcat = 2.3 min-1, Km = 0.85 mM) undergoing hydration with stereospecific protonation from the alpha-face to yield 2-deoxy-beta-D-glucose. 1-Methyl-D-glucal surprisingly serves as only a poor substrate (kcat = 0.056 min-1, Km = 57 mM), also undergoing protonation from the alpha-face. 2-Fluoro-D-glucal, however is completely inert, as a result of inductive destabilisation of the oxocarbenium ion-like transition state for protonation, and functions only as a relatively weak (Ki = 24 mM) inhibitor. Similar behaviour was seen with almond beta-glucosidase and yeast alpha-glucosidase and for the interaction of 2-fluoro-D-galactal with Escherichia coli beta-galactosidase. A series of of alpha, beta-unsaturated glucal derivatives was also synthesised and tested as potential substrates, inhibitors or inactivators of A. faecalis beta-glucosidase. Of these only 1-nitro-D-glucal functioned as a time dependent, irreversible inactivator (ki = 0.011 min-1, Ki = 5.5 mM), presumably acting as a Michael acceptor. Electrospray mass spectrometric analysis revealed multiple labeling of the enzyme by this inactivator, lessening its usefulness as an affinity label. Less reactive Michael acceptor glycals which might have been more specific (1-cyano-, 2-cyano-, 1-carboxylic acid, 1-carboxylic acid methyl ester) unfortunately did not function as inactivators or substrates, only as relatively weak reversible inhibitors (Ki = 3-96 mM).     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.