In this paper, a new kinetic model for methanol to olefin process (MTO) over SAPO-34 catalyst was developed based on data obtained from a micro catalytic reactor using appropriate reaction network. The reaction rate equation has been introduced with consideration of reaction mechanism and the parameters were optimized on the experimental data by genetic algorithm. Comparing the experimental and predicted data showed that the predicted values from the presented model are well fitted to the experimental data. Using this kinetic model, the effect of most important operating conditions such as temperature, pressure, inlet water to methanol molar ratio and methanol space–time on the product distribution, has been examined. Finally, the optimal operating conditions for maximum production of the ethylene and the propylene were introduced. 相似文献
The photoluminescence emission of nanoporous anodic aluminum oxide films formed in phosphoric acid is studied in order to explore their defect-based subband electronic structure. Different excitation wavelengths are used to identify most of the details of the subband states. The films are produced under different anodizing conditions to optimize their emission in the visible range. Scanning electron microscopy investigations confirm pore formation in the produced layers. Gaussian analysis of the emission data indicates that subband states change with anodizing parameters, and various point defects can be formed both in the bulk and on the surface of these nanoporous layers during anodizing. 相似文献
Dynamically crosslinked thermoplastic elastomer nanocomposites were synthesized as modifier for the bitumen binder-based asphalts. Linear low-density polyethylene (LLDPE) and styrene-butadiene rubber (SBR), with the ratio of 80/20, bitumen, and organically modified clay (OC) were all melt mixed in the presence of the sulfur curing system. The proposed mixing was carried out in an internal mixer at 160 °C with a rotor speed of 120 rpm. To enhance the molecular interactions between the polymer phases and the clay silicate layers, maleic anhydride-grafted LLDPE (PE-g-MA) with the maleiation degree of 50% was also incorporated into the mixture. Observation of the composite samples, using the scanning electron microscopy (SEM), revealed the matrix dispersed type of morphology for all dynamically vulcanized samples. X-ray diffraction (XRD) and transmission electron microscopy (TEM) examinations evidenced the exfoliation of the clay silicate layers with good dispersion. Rheomechanical spectrometry (RMS) was performed on the prepared nanocomposites. All dynamically vulcanized nanocomposites comprising 2.5% of OC exhibited shear-thinning behavior and non-terminal characteristics with a low frequency range. These indicate the formation of three-dimensional physical networks by the clay nanolayers throughout the LLDPE matrix. The presence of the bitumen in the composition of the prepared nanocomposites improved the flowability of the samples. This is a promising feature of the prepared nanocomposites to be used as an elastic and resistant modifier in the composition of the bitumen-based asphalts.
A facile sol–gel procedure has been developed for the synthesis of colloidal alumina nanocrystals. For the first time, optical characterization procedures were employed to study the quantum confinement effects in optical properties of the prepared Al2O3 sol. Accordingly, the hyperbolic band model was used to determine the optical band gap of colloidal alumina nanocrystals. X‐Ray diffraction pattern was used to study the crystallographic phase of the dried gel. Morphological characterization was performed using scanning electron microscopy (SEM). Inductively Coupled Plasma (ICP) emission spectroscopy was used to determination purity of the Al2O3 powder. High‐resolution TEM showed that the diameter of colloidal nanocrystals is about 10 nm. Photoluminescence spectroscopy demonstrated that quantum yields for colloidal nanocrystals are 68% with 300 nm excitation wavelength. The experimental observations confirm that highly stable alumina sol with strong UV emission was synthesized. The mentioned optical properties have not been reported before. 相似文献
Walnut green husk is one of the main waste products from walnut and could be used as a source of natural dyeing compounds such as juglone. The present study was conducted to evaluate the effective use of walnut green husk extract as a natural hair dye. Dyeing properties, fastness and antimicrobial behaviours of dyed hair and also a skin irritation test for natural hair dye on rat skin were examined. When the extract was mixed with ascorbic acid as a developer, ferrous sulphate as a mordant, and Aloe vera extract used as a secondary mordant and also a cosmetic ingredient, the reaction resulted in a dark‐brown colour on hair samples. The dyed hair exhibited appropriate colour strength having excellent morphology for a hair surface coated with dye molecules. In addition, the dyed hair possessed good resistance to washing and daylight fastness, without any irritant properties as shown in a rat model, although high concentrations of iron‐based mordant may be problematic for long‐term usage. This paper also suggests the use of natural mordants such as lactic and oxalic acids to avoid any probable risks. Walnut green husk extract was an appropriate natural hair dyeing agent in practice and showed maximum antimicrobial activity compared with semi‐synthetic and commercial hair dyes. The results demonstrated that walnut green husk can be used as an economical, valuable, eco‐friendly and safe source of dyeing and antimicrobial agents for cosmetic products. 相似文献