Production of High-Strength Al/Al2O3/WC Composite by Accumulative Roll Bonding

In this study, Al/Al₂O₃/WC composites were fabricated via the accumulative roll bonding (ARB) process. Furthermore, the microstructure evolution, mechanical properties, and deformation texture of the composite samples were reported. The results illustrated that when the number of cycles was increased, the distribution of particles in the aluminum matrix improved, and the particles became finer. The microstructure of the fabricated composites after eight cycles of the ARB process showed an excellent distribution of reinforcement particles in the aluminum matrix. Elongated ultrafine grains were formed in the ARB-processed specimens of the Al/Al₂O₃/WC composite. It was observed that as the strain increased with the number of cycles, the tensile strength, microhardness, and elongation of produced composites increased as well. The results indicated that after ARB process, the overall texture intensity increases and a different-strong texture develops. The main textural component is the Rotated Cube component.     

Influence of utilization of?bagasse in surface layer on bending strength of three-layer particleboard

It is well known that wood species and particle size used influence the bending strength of three-layer particleboard. The objective of this study was to investigate the influence of using bagasse particles in surface layer on bending strength of three-layer particleboard panels. The ratio of the mixture of bagasse and wood particles was 3:7 and 4:6 in the surface and middle layers, respectively. Press temperatures were chosen at two levels of?165 and?180?°C. Three levels of urea formaldehyde resin were selected for the surface layers, namely: 8, 10, and 12?percent. Bending strength of the panels was determined according to the procedure of European Union (EN) Standard. The results show that bagasse has a positive effect on the bending strength of boards. In this research, the treatment with 40% bagasse and 12% resin in the surface layers and a?180?°C press temperature has resulted in an optimum bagasse board product.     

Analytical Methods for Virus Detection in Water and Food

Potential ways to address the issues that relate to the techniques for analyzing food and environmental samples for the presence of enteric viruses are discussed. It is not the authors?? remit to produce or recommend standard or reference methods but to address specific issues in the analytical procedures. Foods of primary importance are bivalve molluscs, particularly, oysters, clams, and mussels; salad crops such as lettuce, green onions and other greens; and soft fruits such as raspberries and strawberries. All types of water, not only drinking water but also recreational water (fresh, marine, and swimming pool), river water (irrigation water), raw and treated sewage are potential vehicles for virus transmission. Well over 100 different enteric viruses could be food or water contaminants; however, with few exceptions, most well-characterized foodborne or waterborne viral outbreaks are restricted to hepatitis A virus (HAV) and calicivirus, essentially norovirus (NoV). Target viruses for analytical methods include, in addition to NoV and HAV, hepatitis E virus (HEV), enteroviruses (e.g., poliovirus), adenovirus, rotavirus, astrovirus, and any other relevant virus likely to be transmitted by food or water. A survey of the currently available methods for detection of viruses in food and environmental matrices was conducted, gathering information on protocols for extraction of viruses from various matrices and on the various specific detection techniques for each virus type.     

A Non-Hazardous Deparaffinization Protocol Enables Quantitative Proteomics of Core Needle Biopsy-Sized Formalin-Fixed and Paraffin-Embedded (FFPE) Tissue Specimens

Most human tumor tissues that are obtained for pathology and diagnostic purposes are formalin-fixed and paraffin-embedded (FFPE). To perform quantitative proteomics of FFPE samples, paraffin has to be removed and formalin-induced crosslinks have to be reversed prior to proteolytic digestion. A central component of almost all deparaffinization protocols is xylene, a toxic and highly flammable solvent that has been reported to negatively affect protein extraction and quantitative proteome analysis. Here, we present a ‘green’ xylene-free protocol for accelerated sample preparation of FFPE tissues based on paraffin-removal with hot water. Combined with tissue homogenization using disposable micropestles and a modified protein aggregation capture (PAC) digestion protocol, our workflow enables streamlined and reproducible quantitative proteomic profiling of FFPE tissue. Label-free quantitation of FFPE cores from human ductal breast carcinoma in situ (DCIS) xenografts with a volume of only 0.79 mm³ showed a high correlation between replicates (r² = 0.992) with a median %CV of 16.9%. Importantly, this small volume is already compatible with tissue micro array (TMA) cores and core needle biopsies, while our results and its ease-of-use indicate that further downsizing is feasible. Finally, our FFPE workflow does not require costly equipment and can be established in every standard clinical laboratory.     

Comparative electrochemical inactivation of bacteria and bacteriophage

Electric fields and currents have been shown to be capable of disinfecting drinking water and reducing the numbers of bacteria and yeast in food. However, little research has been conducted regarding the effectiveness of electric fields and currents in the inactivation of viruses. The objective of this study was to compare the ability of bacteria and bacteriophage to survive exposure to direct electric current in an electrochemical cell, where they would be subject to irreversible membrane permeabilization processes, direct oxidation of cellular/viral constituents by electric current, and disinfection by electrochemically generated oxidants. Suspensions of the bacteria Escherichia coli and Pseudomonas aeruginosa and bacteriophage MS2 and PRD1 at both high (approximately 1 x 10(6)CFU or PFU/mL) and low (approximately 1 x 10(3)CFU or PFU/mL) population densities were exposed to currents ranging from 25 to 350 mA in 5s pulses. Post-exposure plaque counts of the bacteriophage were proportionally higher than bacterial culturable counts at corresponding current exposures. E. coli and MS2 were then exposed to 5 mA for 20 min at both high and low population densities. The inactivation rate of E. coli was 2.1-4.3 times greater than that of MS2. Both bacteria and bacteriophage were more resistant to exposure to direct current at higher population densities. Also, amelioration of inactivation within the electrochemical cell by the reducing agent glutathione indicates the major mechanism of inactivation in the electrochemical cell is disinfection by electrochemically generated oxidants. The implications of these results are that technologies relying upon direct current to reduce the numbers of microbes in food and water may not be sufficient to reduce the numbers of potentially pathogenic viruses and ensure the safety of the treated food or water.     

Solid carriers for improved solubility of glipizide in osmotically controlled oral drug delivery system

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli-PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli-PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli-PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Investigation of 6-armchair graphene nanoribbon tunnel FETs

Journal of Computational Electronics - A simulation-based study of an n-type six-dimer-line armchair graphene nanoribbon (6-AGNR) tunnel field-effect transistor with asymmetric reservoir doping...     

Co-electrophoretic deposition of Mn2O3/activated carbon on CuO nanowire array growth on copper foam as a binder-free electrode for high-performance supercapacitors

Journal of Materials Science: Materials in Electronics - The development of new materials with complex structures has proved to be an effective approach to improve their capabilities in a variety...