Ferroic Halide Perovskite Optoelectronics

Metal halide perovskites (MHPs) as one of the most active materials gained tremendous attention in the past decade because of their outstanding performance in optoelectronics. Owing to their perovskite structure, ferroelectricity is anticipated in this class of materials. However, whether MHPs are ferroelectric or not remains elusive. Recently, discussion regarding ferroelasticity in MHPs has been also raised. In addition, ionic motion and structural dynamics are well known in MHPs. The interplay of these phenomena including electric polarization, strain, ionic motion, and structural dynamics can have a significant impact on optoelectronics. Therefore, understanding the mechanism behind these phenomena and their interactions is critical in addressing the controversy about ferroicity of MHPs and developing functional devices. Here, the current findings about MHP's ferroicity are summarized and evaluated and a perspective for the future is provided. It is suggested that ionic motion and associated phenomena, coupled with ferroic behavior, are the main drivers behind MHPs functionality. The challenges are also discussed in probing MHPs’ ferroicity and what new measurement modalities are needed to fully understand and characterize MHP behavior. Finally, it is discussed how ferroic and strain can affect the optoelectronic performance of MHPs and how they can be used for engineering of higher performance devices.     

Closed‐Loop Transmit Diversity Techniques for Small Wireless Terminals and Their Performance Assessment in a Flat Fading Channel

Closed‐loop transmit diversity is considered an important technique for improving the link budget in the third generation and future wireless communication standards. This paper proposes several transmit diversity algorithms suitable for small wireless terminals and presents performance assessment in terms of average signal‐to‐noise ratio (SNR) and outage improvement, convergence, and complexity of operations. The algorithms presented herein are verified using data from measured indoor channels with variable antenna spacing and the results explained using measured radiation patterns for a two‐element array. It is shown that for a two‐element array, the best among the proposed techniques provides SNR improvement of about 3 dB in a tightly spaced array (inter‐element spacing of 0.1 wavelength at 2 GHz) typical of small wireless devices. Additionally, these techniques are shown to perform significantly better than a single antenna device in an indoor channel considering realistic values of latency and propagation errors.     

Ionization coefficient of monolayer graphene nanoribbon

A semi-analytical model for impact ionization coefficient of graphene nanoribbon (GNR) is presented. The model is derived by calculating probability of electrons reaching ionization threshold energy E_t and the distance travelled by electron gaining E_t. In addition, ionization threshold energy is semi-analytically modelled for GNR. During modelling, we justify our assumptions using analytical modelling and comparison with simulation. Furthermore, it is shown that conventional silicon models are not valid for calculation of ionization coefficient of GNR. Finally, the profile of ionization is presented using the proposed models and the results are compared with that of silicon.     

Radiation analysis and errors associated with the monopulse operation of a satellite direction finder

This work describes the radiation performance of a novel concept for direction and location finding, using stationary satellite beacons. The received signals are processed with a monopulse four-element array. The monopulse mode is generated using the phase excitation of the radiating elements. For accurate processing the radiation phase should correspond with the bearing angle around the boresight direction. Phase deviations, however, occur in this phase pattern owing to the discrete excitation of the elements. Therefore, detailed analyses are presented for this phase pattern, its attainable gain and the depolarization effects, in order to select the kind of array elements, and their spacings, which minimize the phase pattern deviations. The dipoles and the slots, as array elements, yield better phase performance, smaller size and simpler structures than horn radiators, at the expense of worse depolarization.     

A new quantum-dot cellular automata full-adder

A novel expandable five-input majority gate for quantum-dot cellular automata and a new full-adder cell are presented. Quantum-dot cellular automata (QCA) is an emerging technology and a possible alternative for semiconductor transistor based technologies. A novel QCA majority-logic gate is proposed. This component is suitable for designing QCA circuits. The gate is simple in structure and powerful in terms of implementing digital functions. By applying these kinds of gates, the hardware requirement for a QCA design can be reduced and circuits can be simpler in level, gate counts and clock phases. In order to verify the functionality of the proposed device, some physical proofs are provided. The proper functionality of the FA is checked by means of computer simulations using QCADesigner tool. Both simulation results and physical relations confirm our claims and its usefulness in designing every digital circuit.     

Evaluation of patient dose in some mammography centres in Iran

High diagnostic sensitivity and specificity while maintaining the least dose to the patient is the ideal mammography. The objective of this work was to evaluate patient dose and image quality of mammograms to propose corrective actions. The image quality for 1242 patient in 7 mammography facilities in Tehran city was evaluated based on selected image quality criteria using a three-point scale. Clinical image quality, the entrance surface air kerma, the average glandular dose and optical density of films for standard PMMA phantom of 4.5 cm thickness were evaluated. The results showed that up to 72 % of mammograms were in good condition to be diagnosed, and only about 3.4 % of the images were unacceptable or with suboptimal quality. The entrance surface air kerma values were in the range of 3.8-10.5 mGy, average glandular dose 0.5-1.8 mGy and optical density of films 0.74-2.03. The image quality evaluation after correction actions, periodic image quality evaluation and using the correct equipment certainly will improve patient dose.     

Reduction toxicity of Amphotericin B through loading into a novel nanoformulation of anionic linear globular dendrimer for improve treatment of leishmania major

Amphotericin B (A) as an antileishmanial drug has limited clinical application owing to severe side-effects and low-water solubility. This is the first study reported using Anionic Linear Globular Dendrimer (ALGD) as A carrier for the increase of A solubility rate, decrease its toxicity, and improve its therapeutic effects. ALGD was synthesized and A was loaded into nanoparticles for the first time with the drug-loading efficiency of 82%. Drug loading was confirmed using characterization methods. The drug solubility rate was increased by 478-folds. The results of the study showed that the A toxicity was significantly decreased by 95% in vitro and in vivo environments, which was confirmed by pathology findings and enzymatic evaluation. Furthermore, the nanodrug caused that mortality rate was reached to zero. Moreover, the nanodrug was as potent as the free drug and glucantime (GUL) in reducing the parasite burden and parasite number. These findings indicated the potency of ALGD to decrease the drug side-effects, increase the drug solubility rate, and improve the drug efficacy. Moreover, the nanoformulation was a non-toxic and cost-effective formulation. The conformity between in vitro and in vivo results suggested that the A-loaded ALGD could be considered as a promising candidate in reducing the side-effects of A in leishmaniasis treatment.

Open image in new window

     

Some Studies on Starch Carbamate

Starch carbamate was prepared by reacting maize starch with urea using solid state technique. The different factors affecting this reaction were studied. These factors include urea concentration, type of starch, reaction and duration. The carbamate extent and carbamation reaction efficiency (%) were traced by estimating the nitrogen content of the reaction product. Solubility, viscosity and total ester content of starch carbamate samples were estimated. The carbamate extent increases by increasing urea concentration as well as reaction temperature and duration. Increasing the reaction temperature and duration has the same effect on carbamation reaction efficiency (%), while increasing urea concentration do the reverse. The solubility (%) of starch carbamate samples depends on urea concentration, reaction temperature and duration as well as the type of starch used. The maximum solubility obtained was 63% and 43% for starch carbamate derived from pregelled and native starch, respectively. Tentative mechanism for the reaction between starch and urea has been proposed.     

Thermal,mechanical, and corrosion resistance properties of vinyl ester/clay nanocomposites for the matrix of carbon fiber‐reinforced composites exposed to electron beam

Vinyl ester/clay nanocomposites with 1, 3, and 5% nanoclay contents were prepared. X‐ray diffractography patterns and Scanning Electron micrographs showed that nanocomposites with the exfoliated structure were formed. Thermogravimetric analysis, water absorption test, and Tafel polarization method, respectively, revealed the improvements in thermal resistance, water barrier properties, and corrosion resistance properties of the samples with an increase in the amount of the incorporated nanoclay. Tensile tests showed that nanoclay also enhanced the mechanical properties of the polymer, so that the tensile strength of the samples with 5% nanoclay was more than 3 times higher than tensile strength of pure vinyl ester samples. Overall, the best properties were observed for the samples containing 5% nanoclay. Pure vinyl ester and nanocomposite with 5% nanoclay content were exposed to the electron beam radiation and their mechanical properties improved up to 500 kGy irradiation dose. Finally, pure vinyl ester and vinyl ester/nanoclay (5%) matrixes were reinforced with carbon fiber and the effect of electron beam irradiation on their mechanical properties was examined. The tensile strength and the modulus of the samples initially increased after exposure to the radiation doses up to 500 kGy and then a decrease was observed as the irradiation dose rose to 1000 kGy. Moreover, nanoclay moderated the effect of the irradiation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42393.