Positive-temperature-coefficient effect of electrical resistivity below melting point of poly(vinylidene fluoride) (PVDF) in Ni particle-dispersed PVDF composites

This paper discusses the positive-temperature-coefficient effects of resistivity in Ni particle-dispersed poly(vinylidene fluoride) (PVDF) composites based on experiment results from SEM, DSC, and pressure-volume-temperature (PVT) measurements. The melting points of composites with Ni content of 20, 30, 40, and 50vol.% were equal to that of pure PVDF. The PTC effects in composites with Ni content of 40 and 50vol.% occurred at temperatures near the melting point of the PVDF matrix, whereas those in composites with Ni content of 20 and 30vol.% occurred at temperatures below the melting point of the PVDF matrix. We found that the PTC effect occurs even without melting of the matrix polymer. Moreover, we determined that a slight increase in specific volume at temperatures below the melting point of the matrix polymer acts fully as a driving force for forming a gap between fillers. This suggestion was backed up by theoretical analyses using percolation theory and a thermal-fluctuation-induced tunneling model.     

Fluorometric detection of interaction between lipase and glyceride

Previously, we devised the efficient modification of lipase, which can be dissolved and still maintain its activity in organic solvents. In this work, the fluorescence of the modified lipase could be detected in chloroform. When glycerides were added to the modified lipase solution, the intrinsic tryptophan fluorescence of the modified lipase decreased, which suggests that the environment of the tryptophan residue was affected by the substrate. The interaction between the modified lipase and glyceride was studied kinetically in terms of fluorescence intensity of the tryptophan residue. Because glyceride is not subject to hydrolysis in nonaqueous solution, the dissociation constant of the enzyme-substrate complex could be determined. Thus, insight into the direct interaction between enzyme and substrate provided some structural information regarding the active site of lipase.     

Preparation of regioisomers of structured TAG consisting of one mole of CLA and two moles of caprylic acid

TAG (MLM) with medium-chain FA (MCFA) at the 1,3-positions and long-chain FA (LCFA) at the 2-position, and TAG (LMM) with LCFA at the 1(3)-position and MCFA at 2,3(1)-positions are a pair of TAG regioisomers. Large-scale preparation of the two TAG regioisomers was attempted. A commercially available FFA mixture (FFA-CLA) containing 9-cis, 11-trans (9c, 11t)- and 10t,12c-CLA was selected as LCFA, and caprylic acid (C₈FA) was selected as MCFA. The MLM isomer was synthesized by acidolysis of acyglycerols (AG) containing two CLA isomers with C₈FA: A mixture of AG-CLA/C₈ FA (1∶10, mol/mol) and 4 wt% immobilized Rhizomucor miehei lipase was agitated at 30°C for 72 h. The ratio of MLM to total AG was 51.1 wt%. Meanwhile, LMM isomer was synthesized by acidolysis of tricaprylin with FFA-CLA: A mixture of tricaprylin/FFA-CLA (1∶2, mol/mol) and 4 wt% immobilized R. miehei lipase was agitated at 30°C for 24 h. The ratio of LMM to total AG was 51.8 wt%. MLM and LMM were purified from 1,968 and 813 g reaction mixtures by stepwise short-path distillation, respectively. Consequently, MLM was purified to 92.3% with 49.1% recovery, and LMM was purified to 93.2% with 52.3% recovery. Regiospecific analyses of MLM and LMM indicated that the 2-positions of MLM and LMM were 95.1 mol% LCFA and 98.3 mol% C₈ FA, respectively. The results showed that a process comprising lipase reaction and short-path distillation is effective for large-scale preparation of high-purity regiospecific TAG isomers.     

Preparation of TiO2 thin films using octadecylamine Langmuir-Blodgett films and evaluation of their photocatalytic activity

A study was conducted to demonstrate that nanometer-thick titanium dioxide (TiO(2)) thin films could be prepared by the hydrolysis of titanium potassium oxalate using octadecylamine (ODA) Langmuir-Blodgett (LB) films as templates. The amount of TiO(2) generated in the LB film was found to be proportional to the number of deposited ODA layers, which enables precise control of the TiO(2) film thickness. After heat treatment of the LB films at 300-600°C, the photocatalytic activities of the resulting TiO(2) films were determined from the decomposition of stearic acid cast films when irradiated with UV light for different time periods. Higher photocatalytic activity was observed in TiO(2) films heat treated at lower temperatures.     

Antiproliferative effect of aaptamine on human chronic myeloid leukemia k562 cells

We previously isolated aaptamine, a benzonaphthyridine alkaloid, from marine sponge Aaptos suberitoids. In this study, we investigated the anti-proliferative effect of aaptamine on chronic myeloid leukemia (CML) K562 cells. Aaptamine inhibited growth of K562 with a GI50 as 10 μM, and arrested cell cycle at G2/M phase. Western blot analysis indicated that aaptamine induced p21 expression in K562 cells. Moreover, p21 promoter was activated by aaptamine treatment in p21 transfected K562 cells. Since K562 is p53 negative, aaptamine was demonstrated to be a p53-independent p21 inducer in CML cells.     

Transferred arc plasma processed mullite from coal ash and bauxite

Coal ash disposal is one of the main problems in thermal power plant unit. Currently, a number of waste management systems are being tried for effective disposal of coal ash. In this paper, coal ash from thermal power plant unit was successfully utilized for synthesis of mullite ceramic by using transferred arc plasma processing (TAP) technique. For this purpose, bauxite was added with coal ash by 0, 25, 50 and75 weight ratio. The compositions were thoroughly mixed by ball milling and were melted in the transferred arc plasma torch at 10 kW input power level for 3 min. Argon was used as plasma forming gas. The phase and microstructure formation of the melted samples were investigated by XRD and SEM images. The results show that the additions of bauxite greatly influenced the phase formation of mullite during the processes.     

新型吸附床的研究进展

吸附床是吸附式制冷装置的核心部件,其性能的优劣直接关系到吸附式制冷装置的制冷效果.通过吸附床的热阻分析,得出强化吸附床传热的措施.文中重点介绍了提高吸附剂与换热壁面的换热系数和吸附剂间的导热系数来强化吸附床传热的方法,详细介绍了填充式吸附床、涂抹式吸附床以及固化式吸附床的结构特点,比较分析3种吸附床的传热传质特点,并阐...     

Vulcanized paper for separation of alcohol aqueous solutions by pervaporation

Paper membranes made from vulcanized cellulose were used for the pervaporation (PV) of aqueous solutions containing methanol, ethanol, and isopropanol. It was noted that the vulcanized cellulose paper membranes (VCPM) could effectively separate alcohol and water from the mixture solutions. To observe the effect of the separation of alcohol aqueous mixtures, the permeation behavior of water and alcohol was examined by means of the separation factor and the permeation flux. The values of the permeation flux in the ethanol/water mixtures were found to vary from 6.2 kg/m²h to 2.1 kg/m²h, as the concentration of ethanol increased from 8 to 87 wt %, and the separation factor (α) changed from α = 2.6 to 6.6, respectively. This showed that the VCPM enhanced the separation of water and alcohol. The highest value observed for the permeation flux was 11 kg/m²h at 87 wt % of methanol concentration and the separation factor at this condition was 4.1. It was shown also that an efficient separation was obtained in the isopropanol/water mixture with a separation factor of 16.6. The contact angles of alcohol/water droplets on the VCPM were measured as well as the wettability of the membrane. There was a tendency of decrease for the contact angle, as the alcohol concentration decreased. This suggested that the solvent wettability decreased in high alcohol concentrations. It was concluded that a high permeabilitty of water through the VCPM resulted in the separation of alcohols and water in the PV process. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

The unique flow of polypropylene at the weld line behind an obstacle in injection molding

In this article, a weld line placed behind an obstacle in an injection‐molded plaque made of metallic mold‐in‐color polypropylene (PP) was investigated. A broad uneven glossy section was visually observed along the weld line after the v‐notch weld disappeared. Although disk‐shaped metallic pigments were oriented parallel to the wall according to laminar flow, the pigment particles at the weld behind the obstacle were ordered vertically at the center of the depth direction. In PP molded without pigment, a black line was observed at the same position in the metallic weld. Based on a measurement of the crystal structure, the black line was caused by the rapid cooling of molten PP. Elongational flow occurred along the weld line after the diminishing v‐notch weld. The unique flow ordered the pigments obliquely at the advancing flow front and disturbed the subsequent flow of hot PP which transferred heat to the crystallizing mass. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers