High-aspect-ratio through-hole array microfabricated in a PMMA plate for monodisperse emulsion production

Microchannel (MC) emulsification is a promising technique for producing monodisperse emulsions consisting of highly uniform droplets. The authors developed a high-aspect-ratio microstructure (HARMST) made of poly(methyl methacrylate) (PMMA) as a new MC emulsification device. A PMMA straight-through MC array plate consisting of 31,250 through-holes with a 7.3 × 22.9-μm oblong section and a 200-μm depth was fabricated by a process of synchrotron radiation (SR) lithography and etching. Oblong MCs fabricated in a PMMA straight-through MC array were highly uniform with a coefficient of variation of less than 2%. The fabricated PMMA straight-through MC array plate was used to produce water-in-oil (W/O) emulsions. Monodisperse W/O emulsions with average droplet diameters of approximately 25 μm and a minimum coefficient of variation of 3.2% were produced via a hydrophobic PMMA straight-through MC array. The PMMA straight-through MC array plate also produced monodisperse W/O emulsions at droplet production rates of up to 1.7 × 10⁴/s. The PMMA straight-through MC array plates developed in this work are expected to expand the application field of emulsification using straight-through MC array plates, which have previously been made of single-crystal silicon.     

FENECIA: failure endurable nested-transaction based execution of composite Web services with incorporated state analysis

Interest in the Web services (WS) composition (WSC) paradigm is increasing tremendously. A real shift in distributed computing history is expected to occur when the dream of implementing Service-Oriented Architecture (SOA) is realized. However, there is a long way to go to achieve such an ambitious goal. In this paper, we support the idea that, when challenging the WSC issue, the earlier that the inevitability of failures is recognized and proper failure-handling mechanisms are defined, from the very early stage of the composite WS (CWS) specification, the greater are the chances of achieving a significant gain in dependability. To formalize this vision, we present the FENECIA (Failure Endurable Nested-transaction based Execution of Composite Web services with Incorporated state Analysis) framework. Our framework approaches the WSC issue from different points of view to guarantee a high level of dependability. In particular, it aims at being simultaneously a failure-handling-devoted CWS specification, execution, and quality of service (QoS) assessment approach. In the first section of our framework, we focus on answering the need for a specification model tailored for the WS architecture. To this end, we introduce WS-SAGAS, a new transaction model. WS-SAGAS introduces key concepts that are not part of the WS architecture pillars, namely, arbitrary nesting, state, vitality degree, and compensation, to specify failure-endurable CWS as a hierarchy of recursively nested transactions. In addition, to define the CWS execution semantics, without suffering from the hindrance of an XML-based notation, we describe a textual notation that describes a WSC in terms of definition rules, composability rules, and ordering rules, and we introduce graphical and formal notations. These rules provide the solid foundation needed to formulate the execution semantics of a CWS in terms of execution correctness verification dependencies. To ensure dependable execution of the CWS, we present in the second section of FENECIA our architecture THROWS, in which the execution control of the resulting CWS is distributed among engines, discovered dynamically, that communicate in a peer-to-peer fashion. A dependable execution is guaranteed in THROWS by keeping track of the execution progress of a CWS and by enforcing forward and backward recovery. We concentrate in the third section of our approach on showing how the failure consideration is trivial in acquiring more accurate CWS QoS estimations. We propose a model that assesses several QoS properties of CWS, which are specified as WS-SAGAS transactions and executed in THROWS. We validate our proposal and show its feasibility and broad applicability by describing an implemented prototype and a case study.     

Analysis of Speaker Adaptation Algorithms for HMM-Based Speech Synthesis and a Constrained SMAPLR Adaptation Algorithm

In this paper, we analyze the effects of several factors and configuration choices encountered during training and model construction when we want to obtain better and more stable adaptation in HMM-based speech synthesis. We then propose a new adaptation algorithm called constrained structural maximum a posteriori linear regression (CSMAPLR) whose derivation is based on the knowledge obtained in this analysis and on the results of comparing several conventional adaptation algorithms. Here, we investigate six major aspects of the speaker adaptation: initial models; the amount of the training data for the initial models; the transform functions, estimation criteria, and sensitivity of several linear regression adaptation algorithms; and combination algorithms. Analyzing the effect of the initial model, we compare speaker-dependent models, gender-independent models, and the simultaneous use of the gender-dependent models to single use of the gender-dependent models. Analyzing the effect of the transform functions, we compare the transform function for only mean vectors with that for mean vectors and covariance matrices. Analyzing the effect of the estimation criteria, we compare the ML criterion with a robust estimation criterion called structural MAP. We evaluate the sensitivity of several thresholds for the piecewise linear regression algorithms and take up methods combining MAP adaptation with the linear regression algorithms. We incorporate these adaptation algorithms into our speech synthesis system and present several subjective and objective evaluation results showing the utility and effectiveness of these algorithms in speaker adaptation for HMM-based speech synthesis.     

Production of monodisperse water-in-oil emulsions consisting of highly uniform droplets using asymmetric straight-through microchannel arrays

This paper reports the production of monodisperse water-in-oil (W/O) emulsions using new microchannel emulsification (MCE) devices, asymmetric straight-through MC arrays that were hydrophobically modified. The silicon asymmetric straight-through MC arrays consisted of numerous pairs of microslots and circular microholes whose cross-sectional sizes were 10 μm. This paper primarily focused on investigating the effect of the osmotic pressure of a dispersed phase (Π_d) on MCE. This paper also investigated the effects of the type of continuous-phase oils and the dispersed-phase flux (J _d) on MCE. The dispersed phases were Milli-Q water and Milli-Q water solutions containing sodium chloride. The continuous phases were decane (as control), hexane, medium chain triacylglyceride (MCT), and refined soybean oil (RSO) solutions containing tetraglycerin monolaurate condensed ricinoleic acid ester (TGCR) as a surfactant. At Π_d of exceeding threshold, highly uniform aqueous droplets with coefficients of variation of less than 3% were stably generated via hydrophobic asymmetric straight-through MCs. Monodisperse W/O emulsions with average droplet diameters between 32 and 45 μm were produced using the alkane–oil and triglyceride–oil solutions as the continuous phase. This work also demonstrated that the hydrophobic asymmetric straight-through MC array had remarkable ability to produce highly uniform aqueous droplets at very high J _d of up to 1,200 L m⁻² h⁻¹.     

Absorber design for a compound parabolic concentrator collector without transmission loss

A new design method for a compound parabolic concentrator heat collector is described. The conventional design of the ideal compound parabolic concentrator collector has a touching point between a light absorber and the reflectors. This structure is not preferable from the standpoint of conductive heat leakage and thermal stress on reflector materials. On the other hand, if the absorber and the reflectors are separated from each other, the gap between them usually causes optical errors such as light transmission loss or an increase in the reflection number. We discuss the fact that ideal heat collection is possible, in spite of the gap, by introducing the idea of an effective heat concentration ratio.     

Significant reduction of medical costs by differentiation therapy with all-trans retinoic acid during remission induction of newly diagnosed patients with acute promyelocytic leukemia. The Japan Adult Leukemia Study Group

OBJECTIVE: For resuscitation of hemorrhagic hypovolemia, we compared the effectiveness of (1) isotonic lactated Ringer's solution (LRS), (2) 2400 mOsm of 7.5% NaCl:6% dextran 70 (HSD), and (3) 2400 mOsm of 7.9% sodium acetate:1.9% NaCl:6% dextran 70 (HAD). DESIGN: In six randomized, blinded experiments for each solution, conscious instrumented adult sheep were hemorrhaged by removing approximately 1.8 L (42 +/- 3 mL/kg) of blood, while maintaining the mean arterial pressure (MAP) at 50 mm Hg for 2 hours. METHODS: Test solutions were infused as needed to restore the cardiac index to baseline. RESULTS: Volume requirements with HAD (236 +/- 29 mL) and HSD (244 +/- 39 mL) were significantly less (p < 0.05) than LRS (3463 +/- 234 mL). Mean arterial pressure was normalized with HSD and LRS, but not with HAD, which resulted in MAPs of 20 to 25 mm Hg less than baseline resulting from a reduced peripheral resistance. Oxygen delivery, however, was significantly higher with HAD during the resuscitation period. Acid-base balance (pH) and oxygen consumption were normalized within 5 minutes of infusion only with HAD. CONCLUSIONS: Small-volume infusion with HAD resulting in "high-flow-low-pressure" resuscitation may offer unique hemodynamic and metabolic advantages for the initial treatment of hemorrhage from trauma.     

Experimental and clinical study on intraoperative local infusion chemotherapy (ILIC) for advanced gastric carcinoma

An intensive chemotherapy combined with surgery, termed "intraoperative local infusion chemotherapy (ILIC)", was devised. The ILIC procedure is to infuse 50 mg of cisplatin through the feeding artery to the tumor, which has been isolated from blood flow by clamping the stomach and blood vessels, before radical surgery. An experiment in dogs showed considerable free Pt transfer into thoracic lymph after ILIC. Sum total Pt in the thoracic lymph after ILIC (294.5 micrograms/3 h) was 4.3 times that after IV administration (68.3 micrograms/3 h). In ILIC, AUC of free Pt in the thoracic lymph was about 5.8 times that in peripheral blood. ILIC was applied in 24 advanced gastric cancer patients, consisting of 6, 2, 4 and 12 in pTNM stage II, IIIA, IIIB and IV, respectively. Pt concentration of the tissues was high in the tumor (23.22 micrograms/g) and the regional lymph nodes (2.95 micrograms/g) compared to that in the serum (0.45 microgram/ml). The survival rate (Kaplan-Meier) in the ILIC patients was significantly higher than that of control patients (matched pair method) from among patients treated by surgery alone. No fatal complications were encountered in any patient treated by ILIC.     

Single-mode optical waveguides fabricated from fluorinated polyimides

Buried channel optical waveguides were fabricated from fluorinated polyimides. They operated in single mode and showed an optical loss of less than 0.3 and 0.7 dB/cm for TE and TM polarizations, respectively, at a wavelength of 1.3 mum. Moreover, these waveguides had high heat and moisture resistance; the optical loss did not significantly change after heating at 380 degrees C for 1 h or after exposure to 85% relative humidity at 85 degrees C for over 200 h.     

Fracture toughness of eutectic Al-Si casting alloy with different microstructural features

The static fracture toughness of a series of eutectic Al-Si casting alloy with different microstructural features has been evaluated. The dominant influence of eutectic silicon in controlling the fracture toughness is thus clarified. The relationship between the fracture toughness and the microstructure was established. Fracture toughness was found to be strongly associated with the size and morphology of silicon particles. The other feature which greatly influences the fracture toughness is the ratio (/DE)_Si, i.e. the silicon particle spacing divided by the equivalent particle diameter, rather than the silicon particle spacing, _Si. Fracture toughness also correlates well with the void growth parameter, VGP (=_y (/DE)_Si), proposed by the authors. The results of the present work can be used to develop an understanding of the variation of fracture toughness with the microstructural features of eutectic Al-Si alloys.