巡逻攻击导弹协同侦察航路规划研究

为了充分发挥巡逻攻击导弹巡逻侦察能力,研究了巡逻攻击导弹侦察航路规划.首先,在威胁建模的基础上,基于图论思想将巡逻侦察航路规划问题转化为哈密顿圈问题;然后,提出了基于Floyd算法和改良圈算法的航迹规划算法,求取了初始航路;最后采用三次B样条对航路进行优化,得到可飞航路.仿真结果表明该方法简单实用.     

基于FPGA的基带编码器设计

本文介绍了基带码的相关内容,包括基带码的分类、常用的基带码以及CCITT对码型的建议,详细讲叙了单极性非归零码、双极性非归零码、单极性归零码、双极性归零码、差分码、交替极性码几种码型的特点.根据码型变换规则在FPGA平台上设计编码器,采用Verilog HDL语言进行了设计,并在QuartusⅡ软件上实现了设计仿真验证了编码器的功能.     

Q开关532nm激光与强脉冲光治疗咖啡斑疗效对比

目的:对比Q开关532nm激光与强脉冲光治疗咖啡斑疗效.方法:分别用两种方法治疗咖啡斑各30例,观察临床疗效、不良反应及病人满意度.结果:Q开关532nm激光咖啡斑30例,其中9例显效,13例有效,8例无效.强脉冲光治疗治疗30例,其中6例显效,15例有效,9例无效.两种方法无一例出现疤痕.结论:两者临床疗效及不良反应无显著差异.但因强脉冲光治疗时疼痛感稍轻、治疗周期短、不耽误工作而更受欢迎.     

机载适航标准DO-178B/C软件计划过程研究

介绍了DO-178B/C标准的发展历程,结合对DO-178B/C标准软件生命周期过程的研究,从活动、子过程转段及顺序、生命周期环境、其它因素、开发标准、计划满足DO-178B/C要求以及计划的开发与修正等7个方面对软件计划过程进行了研究,并对关注点进行了分析,最后展望了DO-178B/C标准的未来研究方向.     

应用纵向分区彩虹全息术合成断层图像的三维消色像

报道了应用纵向分割多狭缝曝光彩虹全息术合成多幅断层图像为三维消色像的方法及其实验结果。通过将主全息图记录狭缝按纵向分割并结合使用循环分割和色散补偿光栅 ,实现了在较高的分辨率和较低色模糊的多幅断层像的白光三维消色像的合成 ,并提高了再现像的视觉亮度、视场和立体感。     

Low-Temperature Physical Properties of Ba8Ni x Ge46?x (x?=?3,?4,?6)

Polycrystalline samples of type?I clathrate Ba₈Ni _x Ge_46?x (x?=?3, 4, 6) have been synthesized using a radio-frequency (RF) induction furnace. Ba₈Ni _x Ge_46?x samples show metallic-like behavior (d??/dT?>?0) with high resistivity at room temperature, and diamagnetic susceptibility at 2?K and 300?K. The charge carriers vary from n type to p type depending on the Ni stoichiometry. The carrier concentrations at 300?K are calculated to be 5.84(3)?e^?/cell for x?=?3, 2.29(1)?e^?/cell for x?=?4, and 3.29(1)?h⁺/cell for x?=?6. The deviation of the carrier concentrations from the values expected based on 4-bonded Ni suggests that vacancies may play a very important role in the electronic states. The effective carrier masses are estimated from the low-temperature heat capacity data.     

激光脉宽和气压环境对固体火箭推进剂点火反应程度的影响研究

在真空(10 Pa)和空气(10~5 Pa)环境下,分别用短脉宽(10 ns)和长脉宽(140μs)激光辐照固体火箭推进剂HTPB/AP/Al样品,利用电磁复摆测量了冲量值,获取了对应激光入射能量和样品质量迁移量。结果表明:在长脉宽激光作用时,比冲在真空中随功率密度提高而增长,在空气中受激光烧蚀带走部分能量的影响偏低;用短脉宽激光作用时,热化学反应作功贡献减少,比冲在真空中受等离子体屏蔽影响较低,空气中冲量耦合机制以LSD波作功为主。     

波分复用在自由空间光通信系统的应用仿真

介绍波分复用和自由空间光通信系统原理,利用Optisystem光通信软件仿真搭建了波分复用在光传输链路系统的应用模型。在直接调制下,通过对系统的Q因子、误码率等参数的仿真分析表明,波分复用在FSO系统中的应用具有可行性和稳定性。     

一种新的分层多播拥塞控制协议

提出了一种新的自适应分层多播拥塞控制方案(ALM)。ALM是发送方与接收方共同驱动、由路由器辅助流量控制的拥塞控制方案,通过把发送方的动态分层和接收方的自适应速率调整有机结合,不仅增强了分层多播的适应能力,提高了系统的吞吐量,而且较好地满足了TCP友好性。仿真实验表明,ALM能有效地利用网络带宽,解决网络带宽的异构性问题,并能通过接收端计算TCP友好速率,使接收端达到与TCP流公平竞争网络资源的目的。     

Interfacial Reactions of Sn-3.5Ag-<Emphasis Type="Italic">x</Emphasis>Zn Solders and Cu Substrate During Liquid-State Aging

The effects of Zn (1 wt.%, 3 wt.%, and 7 wt.%) additions to Sn-3.5Ag solder and various reaction times on the interfacial reactions between Sn-3.5Ag-xZn solders and Cu substrates a during liquid-state aging were investigated in this study. The composition and morphological evolution of interfacial intermetallic compounds (IMCs) changed significantly with the Zn concentration and reaction time. For the Sn-3.5Ag-1Zn/Cu couple, CuZn and Cu₆Sn₅ phases formed at the interface. With increasing aging time, the Cu₆Sn₅ IMC layer grew thicker, while the CuZn IMC layer drifted into the solder and decomposed gradually. Cu₅Zn₈ and Ag₅Zn₈ phases formed at the interfaces of Sn-3.5Ag-3Zn/Cu and Sn-3.5Ag-7Zn/Cu couples. With increasing reaction time, the Cu₅Zn₈ layer grew and Cu atoms diffused from the substrate to the solder, which transformed the Ag₅Zn₈ to (Cu,Ag)₅Zn₈. The Cu₆Sn₅ layer that formed between the Cu₅Zn₈ layer and Cu was much thinner at the Sn-3.5Ag-7Zn/Cu interface than at the Sn-3.5Ag-3Zn/Cu interface. Additionally, we measured the thickness of interfacial IMC layers and found that 3 wt.% Zn addition to the solder was the most effective for suppressing IMC growth at the interfaces.