Influence of Y~(3+),Yb~(3+),Gd~(3+) cations on structural and electromagnetic properties of CuFe_2O_4 nanoferrites prepared via one step sol-gel method

Rare earths(REs) play a key role in distorting spinel structure by creating some defects at the lattice sites and make them suitable for magnetodielectric applications.In the present study,the nanoferrites of CuRE_(0.02)Fe_(1.98)O_4,where REs=Y~(3+),Yb~(3+),Gd~(3+),were prepared using one step sol-gel method.The prepared samples are copper ferrite(CFO),yttrium doped copper ferrite(Y-CFO),ytterbium doped copper ferrite(Yb-CFO) and gadolinium doped copper ferrite(Gd-CFO),respectively.The single-phase structure of all the REs doped nanoferrites was determined by X-ray diffraction(XRD) analysis.The porosity,agglomerations and grain size of the REs doped copper ferrite were examined using field emission scanning electron microscopy(FESEM) analysis.Fourier transform infrared spectroscopy(FTIR)elaborates the phase formation and environmental effects on the REs doped nanoparticles(NPs).The recorded room temperature M-H loops from a vibrating sample magnetometer(VSM) elucidate the magnetic properties of the REs doped spinel nanoferrites.The magnetic saturation(M_s) was calculated in the range of 23.08 to 51.78 emu/g.The calculated coercivity values(272.6 to 705.60 Oe) confirm the soft magnetic behavior of REs doped copper ferrites.Furthermore,the electromagnetic and dielectric properties were assessed using a Vector network analyzer(VNA) from 1 to 6 GHz.The permeability,permittivity,dielectric tangent loss and electric modulus of the REs doped spinel ferrites illustrate that the prepared NPs may be suitable for microwave and high frequency applications.     

A proposed approach for setup time reduction through integrating conventional SMED method with multiple criteria decision-making techniques

Short setup time is an essential element for the effective implementation of many lean pillars, i.e., JIT, and Kanban. Most of the current setup reduction methodologies are based on Shingo’s Single Minute Exchange of Dies (SMED) that suggests the conversion of internal setup operations to external operations. However, the conventional SMED approach – as proposed by Shingo – does not possess a systematic approach to accomplish this conversion. Thus, a new approach is proposed in order to aid the process engineers in implementing SMED. The proposed approach is based on the conventional SMED, but also it incorporates Multiple Criteria Decision-Making Techniques (MCDM) to the third implementation phase. The MCDM techniques used in this work are Analytical Hierarchal Process (AHP), Preference Selection Index (PSI) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS). The proposed approach provides a systematic procedure for selecting the best setup technique among the available alternatives, and takes also into consideration other factors that affect the decision-making process; including: cost, energy, facility layout, safety, life, quality and maintenance. A real example of PVC industry is used to exemplify the approach. The results demonstrate the capability of the proposed approach in setup time reduction, which in turn will improve machines’ utilization, and increase the productivity and flexibility of the whole facility.     

On some new operations in soft module theory

In this paper, we introduce the notions of sum and direct sum of soft submodules, small soft submodules and radical of a soft module. Moreover, we obtain basic properties of such soft submodules.     

Production of in situ aluminum-titanium diboride master alloy formed by slag-metal reaction

Al-TiB₂ master alloys have received much attention in recent years owing to their potential as efficient grain refiners for aluminum foundry alloys. In this study, the process of production of master alloys was investigated to develop a low cost method, namely, slag-metal reaction. This method can be used to fabricate Al-TiB₂ master alloy in situ from the TiO₂-H₃BO₃-Na₃AlF₆ and Al system. Since the price of the raw materials is low and the technology is simple, the processing technique appears to reduce the cost of the master alloy. Because of exothermic reactions, not much energy is needed to melt materials. In this process, Titanium diboride particles were formed in situ through the reactions of TiO₂, H₃BO₃ and Na₃AlF₆. Results showed that when the aluminum melted, the condensed TiB₂ particles that formed in situ were spherical with an average diameter of 1 μm. Furthermore, these TiB₂ particles were distributed uniformly through the master alloy.     

Practical evaluation of relationship between concrete resistivity,water penetration,rapid chloride penetration and compressive strength

There are several factors and test methods for evaluating the durability of concrete. In recent years a great deal of attention has been paid to research and development of relationships of these parameters for production of sustainable concretes: water penetration and Rapid Chloride Penetration Test (RCPT) methods which are most commonly used to evaluate the permeability of concrete are two of the most famous methods specified by BS EN-12390-8:2000 and ASTM C1202 respectively. Concrete surface resistivity (SR) test is also a suitable indicator for concrete penetration and chloride ion permeability. It is a non-destructive, simple, rapid and economical method that can also be used on site.The present study is an exploratory research concerned with the relationship of these methods. Based on the correlation of concrete resistivity with water penetration and Rapid Chloride Penetration Test (RCPT) results, two new models for relating these parameters are presented.     

Effect of aspect ratio on large deformation and necking of polyethylene

Objective of the study is to examine influence of aspect ratio of rectangular cross-section on the tri-axial stress state developed by necking in tensile specimens of polyethylene. The first part of the paper presents an experimental study that used two types of high-density polyethylene (HDPE) as sample material to identify the thickness-dependent relationship between engineering stress and elongation from tensile tests. The experimental study also shows that thinner specimens, i.e. higher aspect ratio, have lower neck propagation speed and higher flow stress, thus higher rate of energy consumption for the neck propagation. The second part of the paper presents finite element simulation of large deformation and necking in HDPE when subjected to uni-axial tension. True stress–strain relationship and governing equation for visco-plastic deformation are determined from the finite element simulation based on experimental data for the two HDPEs, which reveals influence of aspect ratio of cross-section on the stress state during the necking process. Results from the study indicate that plane-stress condition prevails when the aspect ratio increases, i.e. by decreasing the specimen thickness. The finite element simulation also supports the observation that necking in specimens with higher aspect ratio, i.e. thinner specimens, generates higher percentage of reduction in the thickness direction but lower in the width direction. The overall capability for the deformation endurance was found to improve by reducing the specimen thickness. The paper concludes that finite element simulation has successfully demonstrated the influence of aspect ratio of the cross-section on the stress state in the necking process. The paper also concludes that by combining experimental testing and finite element simulation, time-dependent deformation behaviour can be separated from the time-independent deformation behaviour, which is almost impossible to achieve based on the experimental techniques that rely purely on measurement only.