Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films

Extreme environments are often faced in energy, transportation, aerospace, and defense applications and pose a technical challenge in sensing. Piezoelectric sensor based on single-crystalline AlN transducers is developed to address this challenge. The pressure sensor shows high sensitivities of 0.4–0.5 mV per psi up to 900 °C and output voltages from 73.3 to 143.2 mV for input gas pressure range of 50 to 200 psi at 800 °C. The sensitivity and output voltage also exhibit the dependence on temperature due to two origins. A decrease in elastic modulus (Young's modulus) of the diaphragm slightly enhances the sensitivity and the generation of free carriers degrades the voltage output beyond 800 °C, which also matches with theoretical estimation. The performance characteristics of the sensor are also compared with polycrystalline AlN and single-crystalline GaN thin films to investigate the importance of single crystallinity on the piezoelectric effect and bandgap energy-related free carrier generation in piezoelectric devices for high-temperature operation. The operation of the sensor at 900 °C is amongst the highest for pressure sensors and the inherent properties of AlN including chemical and thermal stability and radiation resistance indicate this approach offers a new solution for sensing in extreme environments.     

Semi-Supervised Deep Learning for Multi-Tissue Segmentation from Multi-Contrast MRI

Journal of Signal Processing Systems - Segmentation of thigh tissues (muscle, fat, inter-muscular adipose tissue (IMAT), bone, and bone marrow) from magnetic resonance imaging (MRI) scans is useful...     

Scientific Workflow Makespan Minimization in Edge Multiple Service Providers Environment

The edge computing model offers an ultimate platform to support scientific and real-time workflow-based applications over the edge of the network. However, scientific workflow scheduling and execution still facing challenges such as response time management and latency time. This leads to deal with the acquisition delay of servers, deployed at the edge of a network and reduces the overall completion time of workflow. Previous studies show that existing scheduling methods consider the static performance of the server and ignore the impact of resource acquisition delay when scheduling workflow tasks. Our proposed method presented a meta-heuristic algorithm to schedule the scientific workflow and minimize the overall completion time by properly managing the acquisition and transmission delays. We carry out extensive experiments and evaluations based on commercial clouds and various scientific workflow templates. The proposed method has approximately 7.7% better performance than the baseline algorithms, particularly in overall deadline constraint that gives a success rate.

     

Substrate Analysis on the Design of Wide-Band Antenna for Sub-6 GHz 5G Communication

Wireless Personal Communications - A compact triple band antenna with stacked T-shaped strips inside a rectangular ring monopole has been proposed. This novel structure with a slot in the defected...     

Kinetic modeling of pyrolysis of three Iranian waste oils in a micro-fluidized bed

Different approaches have been used to convert the waste materials into a clean syngas or other chemicals such as methanol. Among them, pyrolysis is a good candidate to produce the synthesis gas and volatile matters for industrial and refinery applications. In this work, we studied the kinetic and chemical behavior of three Iranian waste oils through a kinetic model and an experimental study. The experiments carried out in a micro-FB reactor, which is a good option for low emissions. Results showed that the reaction temperature and reaction rate are two of the most important factors for maximum conversion level of fuel. Results also showed an optimum value for reaction rate. The modeling results validated against the experimental measurements and found to be in good agreements.     

Electrochemical degradation of petroleum hydrocarbons (PAHS) from synthetic aqueous solutions

Water separated from crude oil and wastewater discharge from petroleum oil refineries contains significant quantity of dissolved hydrocarbons. Polycyclic aromatic hydrocarbons (PAHs) are major toxicants in wastewater of refineries. It is difficult to treat wastewater containing PAHs due to their recalcitrant property and low solubility. Conventional techniques for the treatment of wastewater are still a concern of toxicity. Electrochemical oxidation process has been found to be a favorable for treating wastewater. Electrodes with high stability and electrocatalytic activity are important factors for a successful electrochemical oxidation of toxic organics in wastewater. In this study titanium anodes were coated with tin, antimony and iridium oxide mixture from their respective salts by thermal decomposition method. FESEM and XRD used for surface characterization of Ti/SnO₂–Sb₂O₅–IrO₂ anode. Quantification of PAHs was done using GC–MS. Results confirm the presence of respective oxides on anode surface. Their electrocatalytic capability was tested for degradation of 16 priority PAHs in aqueous solution. Results reveal the complete degradation of naphthalene, acenaphthylene, acenaphthene and fluorene without using NaCl electrolyte. While in the presence of NaCl naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene were completely removed. About 98% of total PAHs removal was found at all initial pH values 3, 6, and 9 in the presence of electrolyte. Current study will be helpful in improving quality of petroleum industry wastewater containing PAHs.     

Harmonic and intermodulation performance in an R-LED series network

Analytical expressions are obtained for predicting the harmonic and intermodulation performance of R-LED series networks. These expressions are in terms of the ordinary Bessel functions with arguments depenedent on the modulation index.     

A Channel Borrowing Approach for Cluster-based Hierarchical Wireless Sensor Networks

Mobile Networks and Applications - In Wireless Sensor Networks (WSNs), energy-efficient routing is required to conserve the scarce resources of these networks. Various energy-efficient routing...     

High resolution target localization using rotating linear array radar

In this paper, an algorithm is proposed for detection and joint estimation of parameters of multiple targets using rotating antenna array. This paper is sequel to our previous work addressing a two element antenna array only. Joint estimation of number of targets, the targets’ range, Doppler and their directions of arrivals is carried while the effects of antenna rotation are compensated for a multi element linear array. The effectiveness of the algorithm is verified by the simulation results carried out for an eight element array. The proposed algorithm is able to resolve targets with same range and Doppler. The computations of the proposed algorithm are calculated and comparison is also given with other algorithms.

     

Wireless Brain Computer Interface for Smart Home and Medical System

Wireless Personal Communications - The number of aged and disabled people has been increasing worldwide. To look after these people is a big challenge in this era. However, scientists overcome the...