Laminar convection in the annulus of a double-pipe with triangular fins

A steady and laminar convective flow has been numerically simulated in the fully-developed annular region of a finned double-pipe subjected to the constant heat flux boundary condition imposed at the inner-pipe wall. Finite element method has been employed in this study. Friction factor and Nusselt number have been studied as flow characteristics against variations in the ratio of radii of the inner and the outer pipes, the fin height, the fin half angle and the number of fins. The results show significant enhancement in the heat transfer rate in both the cases when sufficient pumping power is available and when it is not. The minimum and maximum increase in the product of friction factor and Reynolds number relative to the finless geometry is more than one time and more than 40 times respectively while gain in the relative value of Nusselt number lies in the range 1–177. This provides an evidence of more than four times enhancement in the heat transfer coefficient relative to that in the pressure loss as a result of extended fin surfaces.     

Diffusion dynamics of open source software: An agent-based computational economics (ACE) approach

The rising popularity of open source software (OSS) calls for a better understanding of the drivers of its adoption and diffusion. In this research, we propose an integrated framework that simultaneously investigates a broad range of social and economic factors on the diffusion dynamics of OSS using an Agent Based Computational Economics (ACE) approach. We find that interoperability costs, variability of OSS support costs, and duration of PS upgrade cycle are major determinants of OSS diffusion. Furthermore, there are interaction effects between network topology, network density and interoperability costs, which strongly influence the diffusion dynamics of OSS. The proposed model can be used as a building block to further investigate complex competitive dynamics in software markets.     

3D block-based medial axis transform and chessboard distance transform based on dominance

Traditionally, the block-based medial axis transform (BB-MAT) and the chessboard distance transform (CDT) were usually viewed as two completely different image computation problems, especially for three dimensional (3D) space. In fact, there exist some equivalent properties between them. The relationship between both of them is first derived and proved in this paper. One of the significant properties is that CDT for 3D binary image V is equal to BB-MAT for image V' where it denotes the inverse image of V. In a parallel algorithm, a cost is defined as the product of the time complexity and the number of processors used. The main contribution of this work is to reduce the costs of 3D BB-MAT and 3D CDT problems proposed by Wang [65]. Based on the reverse-dominance technique which is redefined from dominance concept, we achieve the computation of the 3D CDT problem by implementing the 3D BB-MAT algorithm first. For a 3D binary image of size N³, our parallel algorithm can be run in O(logN) time using N³ processors on the concurrent read exclusive write (CREW) parallel random access machine (PRAM) model to solve both 3D BB-MAT and 3D CDT problems, respectively. The presented results for the cost are reduced in comparison with those of Wang's. To the best of our knowledge, this work is the lowest costs for the 3D BB-MAT and 3D CDT algorithms known. In parallel algorithms, the running time can be divided into computation time and communication time. The experimental results of the running, communication and computation times for the different problem sizes are implemented in an HP Superdome with SMP/CC-NUMA (symmetric multiprocessor/cache coherent non-uniform memory access) architecture. We conclude that the parallel computer (i.e., SMP/CC-NUMA architecture or cluster system) is more suitable for solving problems with a large amount of input size.     

Selenium Speciation Studies from Soan-Sakesar Valley,Salt Range,Pakistan

Abstract

A regional study of Selenium (Se) speciation in surface waters, groundwaters, and saturation extracts from Soan-Sakesar valley Salt-Range, Pakistan was started in March 1994 and completed in October 1996. Groundwaters, streams, and springs had median concentrations of: total Se 48, 404.5, and 82 μg/l; Se^+VI 40, 350 and 51 μg/l; Se^+IV 8, 48 and 29 μg/l; Se^-II 0, 6.5 and 2.0 μg/l, respectively. The concentration of Se exceeded the recommended water quality guidelines for drinking and irrigation water of 10 and 20 μg/l, respectively. In saturation extracts, median total Se, Se^+VI, Se^+IV and Se^-II were 190, 146, 37 and 7.0 μg/l, respectively. Uchhali, Khabbaki and Jahlar lake water samples had the mean concentration of: total Se 2103, 670 and 297 μg/l; Se^+VI 1777, 470, and 233 μg/l; Se^+IV 291, 166 and 39 μg/l; Se^-II 35, 34 and 25 μg/l, respectively. The Sakesar limestone Formation of Eocene age rich in shales and fossils (median Se concentration 7.2 μg/kg) are considered to be the source of selenium that have enriched soils of Soan-Sakesar valley. Selenim speciation results show the abundance of selenate in all the environmental samples. A linear relationship between Se^+VI and pH (R²= 0.84, 0.58, 0.88, 0.82, and 0.91; significant at the 0.05 level) for groundwater, saturation extract, stream, spring, and lake waters were noted, suggesting that the Se^+VI in the samples is highly associated with pH. Linear relationships were established between Se^+VI and Mg, NO₃, and SO₄ for groundwater (R²= 0.24, 0.16, and 0.64; significant at the 0.01 level) and surface water (R²= 0.96, 0.14, and 0.91; significant at the 0.001 level). This suggests the high concentrations of Mg, NO₃ and SO₄, which strongly adsorb and compete with selenium for surface site, increases the Se^+VI fraction. The results show that the higher percentage of selenate on other species in the analyzed samples is favored by higher pH and oxidizing environments of the valley.     

An Analytical Approach to the Concept of Counter-UA Operations (CUAOPS)

Unmanned Aircraft (UA) have become an integral part of the present-day joint air operations. UA have potential to be employed across the full spectrum of Air Force functions. On the other hand, UA technology could be a subject of an asymmetric use by state actors in high or low density conflict, and/or by non-state actors in many ways including terrorism, drug smuggling, and limited attack with unconventional payloads i.e. biological or chemical agents. Therefore countering the threat associated with the hostile UA use could be necessary in the future. First part of the research revealed that UA can be a threat in the future. In the second part of the research, the SWOT (Strengths-Weaknesses-Opportunities-Threats) analysis supplemented with the Tree analysis (SWOT+Tree) provided a broader look for investigating the factors related to hostile UA use analytically. In literature, there is little information about the concepts for CUAOPS. The final goal of the paper is to find possible solutions and means for a better understanding of the nature of CUAOPS.     

Inverse random under sampling for class imbalance problem and its application to multi-label classification

In this paper, a novel inverse random under sampling (IRUS) method is proposed for the class imbalance problem. The main idea is to severely under sample the majority class thus creating a large number of distinct training sets. For each training set we then find a decision boundary which separates the minority class from the majority class. By combining the multiple designs through fusion, we construct a composite boundary between the majority class and the minority class. The proposed methodology is applied on 22 UCI data sets and experimental results indicate a significant increase in performance when compared with many existing class-imbalance learning methods. We also present promising results for multi-label classification, a challenging research problem in many modern applications such as music, text and image categorization.     

Study on the common criteria methodology for secure ubiquitous environment construction

The ubiquitous environment has been developed since the extension of IT technology. The term ‘Ubiquitous’ is referred firstly by Mark Weiser, which means the user based environment that provides network service ‘any time, anywhere’. In the ubiquitous environment, the computing environment should have the device that recognizes the user and the environment. But there is not a verification process when dealing in sensitive information, and it may cause serious errors or malfunction. In order to complement the problem, members of the CCRA utilized CC(Common Criteria) to build up an assessment system and create a secured ubiquitous environment.     

A changing range genetic algorithm

During the last decade various methods have been proposed to handle linear and non‐linear constraints by using genetic algorithms to solve problems of numerical optimization. The key to success lies in focusing the search space towards a feasible region where a global optimum is located. This study investigates an approach that adaptively shifts and shrinks the size of the search space to the feasible region; it uses two strategies for estimating a point of attraction. Several test cases demonstrate the ability of this approach to reach effectively and accurately the global optimum with a low resolution of the binary representation scheme and without additional computational efforts. Copyright © 2004 John Wiley & Sons, Ltd.