A Distributed and Elastic Application Processing Model for Mobile Cloud Computing

The latest developments in mobile computing technology have increased the computing capabilities of smart mobile devices (SMDs). However, SMDs are still constrained by low bandwidth, processing potential, storage capacity, and battery lifetime. To overcome these problems, the rich resources and powerful computational cloud is tapped for enabling intensive applications on SMDs. In Mobile Cloud Computing (MCC), application processing services of computational clouds are leveraged for alleviating resource limitations in SMDs. The particular deficiency of distributed architecture and runtime partitioning of the elastic mobile application are the challenging aspects of current offloading models. To address these issues of traditional models for computational offloading in MCC, this paper proposes a novel distributed and elastic applications processing (DEAP) model for intensive applications in MCC. We present an analytical model to evaluate the proposed DEAP model, and test a prototype application in the real MCC environment to demonstrate the usefulness of DEAP model. Computational offloading using the DEAP model minimizes resources utilization on SMD in the distributed processing of intensive mobile applications. Evaluation indicates a reduction of 74.6% in the overhead of runtime application partitioning and a 66.6% reduction in the CPU utilization for the execution of the application on SMD.

     

A computationally efficient selected mapping technique for reducing PAPR of OFDM

In orthogonal frequency division multiplexing (OFDM) system, high value of peak-to-average power ratio (PAPR) is an operational problem that may cause non-linear distortion resulting in high bit error rate. Selected mapping (SLM) is a well known technique that shows good PAPR reduction capability but inflicts added computational overhead. In this paper, using Riemann sequence based SLM method, we applied reverse searching technique to find out low PAPR yielding phase sequences with significant reduction in computational complexity. Additionally, we explored side-information free transmission that achieves higher throughput but sacrifices PAPR reduction. Finally, to overcome this loss in PAPR reduction, we proposed application of Square-rooting companding technique over the output OFDM transmitted signal. Simulation results show that the proposed method is able to compensate the sacrifice in PAPR and achieved PAPR reduction of 8.9 dB with very low computational overhead.     

Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films

Extreme environments are often faced in energy, transportation, aerospace, and defense applications and pose a technical challenge in sensing. Piezoelectric sensor based on single-crystalline AlN transducers is developed to address this challenge. The pressure sensor shows high sensitivities of 0.4–0.5 mV per psi up to 900 °C and output voltages from 73.3 to 143.2 mV for input gas pressure range of 50 to 200 psi at 800 °C. The sensitivity and output voltage also exhibit the dependence on temperature due to two origins. A decrease in elastic modulus (Young's modulus) of the diaphragm slightly enhances the sensitivity and the generation of free carriers degrades the voltage output beyond 800 °C, which also matches with theoretical estimation. The performance characteristics of the sensor are also compared with polycrystalline AlN and single-crystalline GaN thin films to investigate the importance of single crystallinity on the piezoelectric effect and bandgap energy-related free carrier generation in piezoelectric devices for high-temperature operation. The operation of the sensor at 900 °C is amongst the highest for pressure sensors and the inherent properties of AlN including chemical and thermal stability and radiation resistance indicate this approach offers a new solution for sensing in extreme environments.     

Inter-cell interference in multi-tier heterogeneous cellular networks: modeling and constraints

Telecommunication Systems - Interference is the main source of capacity limitation in wireless networks. In some medium access technologies in cellular networks, such as OFDMA, the allocation of...     

Semi-Supervised Deep Learning for Multi-Tissue Segmentation from Multi-Contrast MRI

Journal of Signal Processing Systems - Segmentation of thigh tissues (muscle, fat, inter-muscular adipose tissue (IMAT), bone, and bone marrow) from magnetic resonance imaging (MRI) scans is useful...     

Scientific Workflow Makespan Minimization in Edge Multiple Service Providers Environment

The edge computing model offers an ultimate platform to support scientific and real-time workflow-based applications over the edge of the network. However, scientific workflow scheduling and execution still facing challenges such as response time management and latency time. This leads to deal with the acquisition delay of servers, deployed at the edge of a network and reduces the overall completion time of workflow. Previous studies show that existing scheduling methods consider the static performance of the server and ignore the impact of resource acquisition delay when scheduling workflow tasks. Our proposed method presented a meta-heuristic algorithm to schedule the scientific workflow and minimize the overall completion time by properly managing the acquisition and transmission delays. We carry out extensive experiments and evaluations based on commercial clouds and various scientific workflow templates. The proposed method has approximately 7.7% better performance than the baseline algorithms, particularly in overall deadline constraint that gives a success rate.

     

Modeling and Simulation for Transient Thermal Analyses Using a Voltage-in-Current Latency Insertion Method

This article presents a modeling and simulation method for transient thermal analyses of integrated circuits(ICs) using the original and voltage-in-current(VinC) latency insertion method(LIM). LIM-based algorithms are a set of fast transient simulation methods that solve electrical circuits in a leapfrog updating manner without relying on large matrix operations used in conventional Simulation Program with Integrated Circuit Emphasis(SPICE)-based methods which can significantly slow down the sol...     

Improved aquila optimization-based parameter evaluation framework and meta-heuristic algorithm in radio-over-fiber SpatialMux multi-input multi-output long-term evolution system

In heterogeneous access network, Multiple-Input Multiple-Output (MIMO) radio-over-fiber (RoF) system is an efficient approach for multiple signal transmission with low cost and complexity. The performance of RoF fronthaul system in MIMO system will be varied with different nonlinear effects. By adjusting various transmission parameters, such as the input signal power or the laser bias current, the nonlinear impacts produced by the RoF system can be reduced. In this paper, a novel algorithm Improved Aquila Optimization (IAO) is proposed to optimize transmission circumstances of MIMO RoF system. It determines the appropriate bias current for both lasers and Radio Frequency (RF) signal power in a short period. The input signals are wavelength multiplexed with Intensity Modulation and Direct Detection (IM/DD) applied. The carrier as well as transmission frequency is governed by the MIMO-Long-Term Evolution (LTE) standard. The proposed system is implemented in MATLAB, and the performance is evaluated. The experimental results show that fast convergence and trade-off between noise and nonlinearity are obtained with varying bandwidth. In the experimental scenario, the maximum Error Vector Magnitude (EVM) of 1.88, 3.14, and signal-to-noise ratio (SNR) of 3.204, and 2.698 was attained for both quadrature phase shift keying (QPSK) and quadrature amplitude modulation (QAM) modulation. [Correction added on 24 April 2023, after first online publication: the SNR values were corrected in the preceding sentence.] For 100 iterations, the processing time was reduced to 0.137 s. When compared with the conventional state-of-the-art approaches, the accuracy and computational complexity of the proposed approach are improved.     

Electrochemical degradation of petroleum hydrocarbons (PAHS) from synthetic aqueous solutions

Water separated from crude oil and wastewater discharge from petroleum oil refineries contains significant quantity of dissolved hydrocarbons. Polycyclic aromatic hydrocarbons (PAHs) are major toxicants in wastewater of refineries. It is difficult to treat wastewater containing PAHs due to their recalcitrant property and low solubility. Conventional techniques for the treatment of wastewater are still a concern of toxicity. Electrochemical oxidation process has been found to be a favorable for treating wastewater. Electrodes with high stability and electrocatalytic activity are important factors for a successful electrochemical oxidation of toxic organics in wastewater. In this study titanium anodes were coated with tin, antimony and iridium oxide mixture from their respective salts by thermal decomposition method. FESEM and XRD used for surface characterization of Ti/SnO₂–Sb₂O₅–IrO₂ anode. Quantification of PAHs was done using GC–MS. Results confirm the presence of respective oxides on anode surface. Their electrocatalytic capability was tested for degradation of 16 priority PAHs in aqueous solution. Results reveal the complete degradation of naphthalene, acenaphthylene, acenaphthene and fluorene without using NaCl electrolyte. While in the presence of NaCl naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene were completely removed. About 98% of total PAHs removal was found at all initial pH values 3, 6, and 9 in the presence of electrolyte. Current study will be helpful in improving quality of petroleum industry wastewater containing PAHs.