Fabrication and evaluation of a drag-force type dual flow sensor with an embedded temperature sensor

Microsystem Technologies - We designed and fabricated a drag-force type dual flow sensor with an embedded temperature sensor. For the wide range detection, two devices in varying length (300 and...     

Experimental and Modeling Studies on the Chemical Vapor Infiltration with Respect to the Effects of Thermal Gradient and Other Operating Parameters

Effects of operating parameters in the thermal gradient chemical vapor infiltration of propane such as thermal gradient, diffusion, infiltrations time, and concentration of propane were studied by focusing on the visualizations of the intrinsic effects of these parameters. A uniform deposition in the preform was obtained with a gradually increasing temperature along the gas flow. The uniformity of deposition through the preform got improved with increasing deposition time. Results of numerical modeling estimated the experimental data very well when the pre-exponential factor of the overall rate of carbon deposition from propane reported by Vaidyaraman[1] was multiplied by 4. The average density of a preform increased by about 3 times from 0.38 to 1.15 g/cm3 after 60 hr deposition with a thermal gradient under the conditions of 3% propane in nitrogen and 840 to 900 ℃.     

Fabrication of Superjunction Trench Gate Power MOSFETs Using BSG‐Doped Deep Trench of p‐Pillar

In this paper, we propose a superjunction trench gate MOSFET (SJ TGMOSFET) fabricated through a simple p pillar forming process using deep trench and boron silicate glass doping process technology to reduce the process complexity. Throughout the various boron doping experiments, as well as the process simulations, we optimize the process conditions related with the p pillar depth, lateral boron doping concentration, and diffusion temperature. Compared with a conventional TGMOSFET, the potential of the SJ TGMOSFET is more uniformly distributed and widely spread in the bulk region of the n drift layer due to the trenched p‐pillar. The measured breakdown voltage of the SJ TGMOSFET is at least 28% more than that of a conventional device.     

Adapting technology: effect of high-involvement HRM and organisational trust

This study is designed to empirically test a model of high-involvement human resource management (HIHRM), organisational trust, and technology adaptation grounded on social exchange theory in the context of the private banking sector. The proposed model intends to add to the understanding of the effect of HIHRM on technology adaptation via the mediating influence of organisational trust. Frontline employees were surveyed using a self-administered questionnaire. Results from partial least square-structural equation modelling suggest that there is a significant influence of HIHRM on technology adaptation. Organisational trust further mediates the relationship. Thus, this paper finds an answer to the ‘black box’ of human resource management (HRM) practices, explaining how HIHRM influences employees’ attitudes towards technology adaptation. The study can help management have a better understanding of the importance of employee involvement-oriented HRM in introducing and implementing a new technology through the integration of trust processes in the organisation.     

Development of an embedded solar tracker for the enhancement of solar energy utilization

An embedded two‐axis solar tracking system using Laboratory Virtual Instrumentation Engineering Workbench to write the operation and control algorithms was developed for enhancing solar energy utilization. The system consists of a real‐time processor, two motion‐control modules, two step drives, two step motors, feedback devices, and other accessories needed for functional stability. The real‐time processor allows the solar tracker to be used as a stand‐alone, real‐time system that can operate automatically without any external control. The system combines two different solar tracking methods: the optical method and the astronomical method. Cadmium Sulfide (CdS) sensors are employed to continuously generate feedback signals to the controller, ensuring high‐precision solar tracking even under adverse conditions. The CdS sensor is a resistor whose electric resistance decreases with increasing incident light intensity. A database of solar altitude, azimuth, and sunrise and sunset times is provided by this solar tracking system. Other solar trackers operating in an astronomical method may access and use this database over the Internet. Solar position and sunrise and sunset times in the database were compared with those of the Astronomical Applications Department of the U.S. Naval Observatory. The differences were found to be negligible. Copyright © 2011 John Wiley & Sons, Ltd.     

Upper extremity hemodynamics and sensation with backpack loads

Heavy backpacks are often used in extreme environments, for example by military during combat, therefore completion of tasks quickly and efficiently is of operational relevance. The purpose of this study was to quantify hemodynamic parameters (brachial artery Doppler and microvascular flow by photoplethysmography; tissue oxygenation by near-infrared spectroscopy; arterial oxygen saturation by pulse oximeter) and sensation in upper extremities and hands (Semmes-Weinstein monofilament test and 2-point discrimination test) while wearing a loaded backpack (12 kg) in healthy adults for 10 min. All values were compared to baseline before wearing a backpack. Moderate weight loaded backpack loads significantly decreased upper extremity sensation as well as all macrovascular and microvascular hemodynamic values. Decreased macrovascular and microvascular hemodynamics may produce neurological dysfunction and consequently, probably affect fine motor control of the hands.     

Isolation and identification of an antiproliferative substance from fructose–tyrosine Maillard reaction products

We isolated a substance from fructose–tyrosine Maillard reaction products (MRPs) and investigated its antiproliferative effect on six human cancer cell lines. The ethyl acetate fraction of fructose–tyrosine MRPs showed a strong antiproliferative effect; this fraction was isolated and purified using silica gel column chromatography, semipreparative RP-HPLC, and recycling HPLC. The structure of the purified compound was determined using spectroscopic methods. The isolated compound was identified as 2,4-bis(p-hydroxyphenyl)-2-butenal (C₁₆H₁₄O₃, HPB242). HPB242 inhibited cell growth in a dose-dependent manner (10–80 μg/ml) on the six human cancer cell lines. The IC₅₀ values of HPB242 on the six human cancer cell lines were 17.34 μg/ml (MCF-7), 29.21 μg/ml (HCT-116), 34.57 μg/ml (H-460), 34.87 μg/ml (HepG2), 48.77 μg/ml (PC-3), and 55.83 μg/ml (MKN-45).     

Heat transfer of bio-oil in a direct contact heat exchanger during condensation

Rapid quenching of volatiles in fast pyrolysis is important for achieving high yield and quality of the bio-oil product, but few studies have examined the condensation of volatiles and their related heat exchangers. Accordingly, we have studied the condensation characteristics of volatiles by varying heat transfer conditions in a direct contact heat exchanger. As the mass flow rate ratio of quenching oil to pyrolysis gas increased, the heat transfer rate and yield of bio-oil increased. The heat transfer rate and yield of bio-oil reached a maximum value at an intermediate air-to-quenching oil mass flow rate ratio. Additionally, the heat transfer rate and yield of bio-oil decreased as the temperature of the quenching oil increased. Experiments were also conducted to derive an empirical relationship for the volumetric heat transfer coefficient for direct contact heat exchangers.