Anhydrous esterification of myristic acid with propylene: Ion exchange resin and acid-treated clay as catalysts

Anhydrous esterification of myristic acid with propylene was carried out in the temperature range of 110–145°C and pressure from 190–195 psig in the presence of Amberlyst-15 (cation exchange resin) and Filtrol-24 (acid-treated clay) as catalysts. The product ester, isopropyl myristate finds use in cosmetic and topical medicinal preparations where good absorption through the skin is desired. Filtrol-24 is the catalyst of choice, and the recommended operating temperature is 130°C with a pressure of 190 psig.     

The role of N,N-dimethylaniline in the formation of titania gel monolith by sol-gel method

19950405 Our investigation on the rheological aspects such as gelling time, specific density, fluidity, viscosity and surface tension of the sol derived from titanium-tetra-isopropoxide (TTIP), water and isopropanol (i-PrOH) has been reviewed in the presence of n,n-dimethylaniline (DMA) as a drying control chemical agent (DCCA). Dry gels derived from DMA stabilized sol were found to be crack free with a larger surface area. The titania gel monolith obtained in the presence of DMA could be processed into rutile at much lower temperatures.     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

Human erythrocytes bearing electroinserted CD4 neutralize infection in vitro by primary isolates of human immunodeficiency virus type 1

Human erythrocytes bearing electroinserted full-length CD4 (RBC-CD4) can bind and fuse with a laboratory strain of human immunodeficiency virus type 1 (HIV-1) or with T cells infected by HIV-1. Here we show that RBC-CD4 neutralize primary HIV-1 strains in an assay of cocultivation of peripheral blood mononuclear cells (PBMC) from HIV-1-infected persons with uninfected PBMC. RBC-CD4 inhibited viral p24 core antigen accumulation in these cocultures up to 10,000-fold compared with RBC alone. Viral p24 accumulation was inhibited equally well when measured in culture supernatants or in call extracts. The inhibition was dose-dependent and long-lived. Two types of recombinant CD4 tested in parallel were largely ineffective. The neutralization of primary HIV-1 by RBC-CD4 in vitro was demonstrated in PBMC cultures from 21 of a total of 23 patients tested at two independent sites. RBC-CD4 may offer a route to blocking HIV-1 infection in vivo.     

Defects in molecular beam epitaxial GaAs grown at low temperatures

We have utilized a variable energy positron beam and infrared transmission spectroscopy to study defects in GaAs epilayers grown at low temperatures (LT-GaAs) by molecular beam epitaxy. We have measured the Doppler broadening of the positron-electron annihilation gamma ray spectra as a function of positron implantation energy. From these measurements, we have obtained results for the depth profiles of Ga monovacancies in unannealed LT-GaAs and Ga monovacancies and arsenic cluster related defects in annealed LT-GaAs. We have also studied the effects of the Si impurities in annealed LT-GaAs. The infrared transmission measurements on unannealed LT-GaAs furnish a broad defect band, related to As antisites, centered at 0.370 eV below the conduction band.     

Analysis of posterior availability distributions of series and parallel systems

The lifetime distribution of an engineering system is a powerful tool for analysing the system in respect of its reliability characteristics. The analysis can be improved if the experimenter has, and is able to combine, the prior belief about the system with the operational or experimental data. Moreover, in many situations, the operational data with the complete system may either be costlier or non-existent. The problem can still be tackled by making use of such information available on the subunits or components of the system. Pursuing these concepts, the present study deals with the analysis of posterior availability distributions for a series and a parallel system. Time truncated failure and repair information and prior beliefs about the failure and repair rates of the compoents of the systems have been employed in the analysis.     

Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram for sheet material

A heterogeneous finite element model with randomly distributed inhomogeneities has been developed for the determination of the forming limit diagram (FLD) for thin aluminum sheet material based on the prediction of localized necking. The strength difference between the inhomogeneities and the matrix is ascertained either from the fluctuation of the experimental stress-strain curve or from a micromechanical analysis that uses a representative particle field. By changing the specimen geometry and friction conditions, different stress states (or strain paths) are achieved. A plot of the critical Oyane fracture parameter is used to identify the limit strain state. Also, a plot of equivalent plastic strain rate is used to distinguish the boundary of intense shear bands and hence to identify where to take the measurement point. Both a plane stress model and a three-dimensional (3-D) model are adopted to predict the shear banding phenomenon and hence the FLD. The predicted FLD agrees well with the measurements from a recent round robin experimental FLD involving several independent research laboratories. The Taguchi method is applied to assess how the various parameters involved in the heterogeneous model affect the calculated forming limit strain.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.