Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

The effect of the N-linked glycans on structural features and physicochemical functions of soybean β-conglycinin homotrimers

β-Conglycinin is a trimeric protein consisting of three subunits, α,α′,and β, which are N-glycosylated. The α and α′ subunits contain extension regions in addition to core regions common to all subunits. We purified homogeneous trimers consisting of only α, α′, or β from mutant soybean cultivars containing β-conglycinin lacking one or two subunits: α homotrimers from an α′-lacking mutant, α′ homotrimers from an α-lacking mutant, and β homotrimers from an α-and α′-lacking mutant. Structural features and physicochemical functions of the three homotrimers were examined and compared with those of recombinant homotrimers having no N-linked glycans. The native homotrimers have secondary structures very similar to those of the recombinant ones. In analogy with the recombinant homotrimers, the native ones exhibit different thermal stabilities from one another (β>α′>α), and the native α and α′ homotrimers exhibit better solubility, emulsifying ability, and heat-induced association than the native β homotrimer. Further, the N-linked glycans contribute to solubilities of the three subunits at low ionic strength (μ=0.08) and to the emulsifying ability of the native β homotrimer. N-Linked glycans also prevent heat-induced associations of the native α and α′ homotrimers but do not contribute to the secondary structure and the thermal stability of β-conglycinin.     

Thermal antioxidative kinetics of sesamol in triacylglycerols and fatty acid methyl esters of sesame,olive, and canola oils

Oxidation kinetics of the triacylglycerols (TAGs) and fatty acid methyl esters (FAMEs) of sesame, olive, and canola oils were studied in the presence of the different concentrations of sesamol (0.1%–0.16%) at 60, 80, and 100°C. Sesamol increased the temperature coefficient, T_C, and Q₁₀ number of the TAGs more significantly compared to the FAMEs. All the sesamol-added TAG and FAME systems, respectively, of the olive, canola, and sesame oils, respectively, exerted increased values of the Arrhenius (activation energy, E_a, and frequency factor, A) and Eyring (enthalpy, ΔH⁺⁺, and entropy, ΔS⁺⁺) equation parameters. Sesamol improved the Gibbs free energy (ΔG⁺⁺) of the activated complex formation in the canola, sesame, and olive systems, respectively, and the effect was greater in the FAMEs.     

Fourier transform infrared (FTIR) authentication and batch-to-batch consistency for different types of paints using benchtop and handheld FTIR spectrophotometers for oil and gas industry

Standardization of Fourier transform infrared (FTIR) fingerprint region for paints and assessment on the reproducibility using different spectrophotometers were investigated. While selective fingerprint regions may be confusing for technicians/analysts who are non-chemists, we attempt to generalize these regions (e.g., 1300–1000 cm⁻¹ for Epoxy part A and 1400–1000 cm⁻¹ for Epoxy part B) by choosing a universal region (2000–900 cm⁻¹) that works for different paints. Comparison result using a paired student t-test shows that the degree of similarity (r) values from the studied regions are not statistically different. The paint fails the screening analysis occasionally on-site when analyzed using handheld FTIR due to the higher level of noise that gives low r values (r < 0.900 ± 0.002). The same samples were analyzed using a benchtop FTIR and the r values are above 0.900 ± 0.002. While the screening may lead to a false rejection of the sample on-site, there could be occurrence of false acceptance. The on-site screening of EPZ part A with different formulations, for instance, shows that the r values over the entire IR spectrum are above 0.900 ± 0.002 when analyzed using handheld FTIR. After the samples were analyzed using the benchtop, the r values fall below 0.900 ± 0.002.     

Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Effect of kinesthetic and tactile haptic feedback on the quality of experience of edutainment applications

Haptic technologies and applications have received enormous attention in the last decade. The incorporation of haptic modality into multimedia applications adds excitement and enjoyment to an application. It also adds a more natural feel to multimedia applications, that otherwise would be limited to vision and audition, by engaging as well the user’s sense of touch, giving a more intrinsic feel essential for ambient intelligent applications. However, the improvement of an application’s Quality of Experience (QoE) by the addition of haptic feedback is still not completely understood. The research presented in this paper focuses on the effect of haptic feedback and what it potentially adds to the experience of the user as opposed to the traditional visual and auditory feedback. In essence, it investigates certain issues regarding stylus-based haptic education applications and haptic-enhanced entertainment videos. To this end, we used two haptic applications: the haptic handwriting learning tool to experiment with force feedback haptic interaction and the tactile YouTube application for tactile haptic feedback. In both applications, our analysis shows that the addition of haptic feedback will increase the QoE in the absence of fatigue or discomfort for this category of applications. This implies that the incorporation of haptic modality (both force feedback as well as tactile feedback) has positively contributed to the overall QoE for the users.     

New Hybrid Access Method for Femtocell through Adjusting QoS

The increasing number of mobile users raises issues about coverage extension in some areas such as rural zones, indoor or underground locations： one of suggestion solution to accommodate this growing of mobile user is femtocell. Femtocell have been attracting considerable attention in mobile communications, it is a small base station that install to improve the indoor coverage of a given cellular and to enhance user＇s capacity. Call admission control and resource allocation infemtocell＇s hybrid mode are an essential performance promotion issue. Developing methods for femtocell utilization is very comparative nowadays. The two major limitations of wireless communication are capacity and range. The main contribution of our paper is developing resource allocation scheme that can manage the femocell resources between subscriber （femtocell user） and non-subscriber （macrocell user in order to maximizing the system utilizations, we provide a mechanism that leads to serve more users by admitting more subscribers basing on adjusting QoS of the connected users.     

A multi-objective strategy in genetic algorithms for gene selection of gene expression data

A microarray machine offers the capacity to measure the expression levels of thousands of genes simultaneously. It is used to collect information from tissue and cell samples regarding gene expression differences that could be useful for cancer classification. However, the urgent problems in the use of gene expression data are the availability of a huge number of genes relative to the small number of available samples, and the fact that many of the genes are not relevant to the classification. It has been shown that selecting a small subset of genes can lead to improved accuracy in the classification. Hence, this paper proposes a solution to the problems by using a multiobjective strategy in a genetic algorithm. This approach was tried on two benchmark gene expression data sets. It obtained encouraging results on those data sets as compared with an approach that used a single-objective strategy in a genetic algorithm. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Selecting informative genes from microarray data by using hybrid methods for cancer classification

Gene expression technology, namely microarrays, offers the ability to measure the expression levels of thousands of genes simultaneously in biological organisms. Microarray data are expected to be of significant help in the development of an efficient cancer diagnosis and classification platform. A major problem in these data is that the number of genes greatly exceeds the number of tissue samples. These data also have noisy genes. It has been shown in literature reviews that selecting a small subset of informative genes can lead to improved classification accuracy. Therefore, this paper aims to select a small subset of informative genes that are most relevant for cancer classification. To achieve this aim, an approach using two hybrid methods has been proposed. This approach is assessed and evaluated on two well-known microarray data sets, showing competitive results. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008