A model to measure QoE for virtual personal assistant

Until now the virtual assistants (like Siri, Google Now and Cortana) have primarily been confined to voice input and output only. Is there a justification for voice only confinement or can we enhance the user experience by adding a visual output? We hypothesized that providing a higher level of visual/auditory immersion would enhance the quality of user experience. In order to test this hypothesis, we first developed 4 variants of virtual assistant, each with a different audio/visual level of immersion. Developed virtual assistant systems were the following; audio only, audio and 2D visual display, audio and 3D visual display and audio and immersive 3D visual display. We developed a plan for usability testing of all 4 variants. The usability testing was conducted with 30 subjects against eight (8) dependent variables included presence, involvement, attention, reliability, dependency, easiness, satisfaction and expectations. Each subject rated these dependent variables based on a scale of 1–5, 5 being the highest value. The raw data collected from usability testing was then analyzed through several tools in order to determine the factors contributing towards the quality of experience for each of the 4 variants. The significant factors were then used develop a model that measures the quality of user experience. It was found that each variant had a different set of significant variables. Hence, in order to rate each system there is a need to develop a scale that is dependent upon the unique set of variables for the respective variant. Furthermore, it was found that variant 4 scored the highest rate for Quality of Experience (QoE). Lastly several other qualitative conclusions were also drawn from this research that will guide future work in the field of virtual assistants.     

A novel distributed scheduling scheme for OFDMA uplink using channel information and probabilistic transmission

Distributed uplink scheduling in OFDMA systems is considered. In the proposed model, mobile terminals have the responsibility of making their own transmission decisions. The proposed scheme is based on two dimensional reservation in time and frequency. Terminals use channel state information in order to favor transmissions over certain subchannels, and transmission is done in a probabilistic manner. The proposed approach provides more autonomy to mobile devices in making transmission decisions. Furthermore, it allows avoiding collisions during transmission since it leads to collision detection during the resource reservation phase. The proposed approach is compared to other random access methods and shown to be superior in terms of increasing sum-rate, reducing the number of users in outage, and reducing the collision probability in the reservation phase.     

The effects of safety handrails and the heights of scaffolds on the subjective and objective evaluation of postural stability and cardiovascular stress in novice and expert construction workers

Work performed on scaffolds carries the risk of falling that disproportionately threatens the safety and health of novice construction workers. Hence, objective measures of the postural stability, cardiovascular stress, and subjective difficulty in maintaining postural balance were evaluated for four expert and four novice construction workers performing a manual task in a standing posture on a scaffold with and without safety handrails at two different elevation heights. Based on a multivariate analysis of variance, the experience, scaffold height, and presence of a handrail were found to significantly affect measures of the postural stability and cardiovascular stress. At a lower level of worker experience, a higher scaffold height, and in the absence of a handrail (which may correspond to higher risk of a fall), postural stability was significantly reduced, while cardiovascular stress and subjective difficulties in maintaining postural balance increased. We emphasize the importance of training and handrails for fall prevention at construction sites.     

Variant versus invariant time to total forgetting: the learn–forget curve model revisited

Understanding and quantifying the learning–forgetting process helps predict the performance of an individual (or a group of individuals), estimate labor costs, bid on new and repeated orders, estimate costs of strikes, schedule production, develop training programs, set time standards, and improve work methods [IIE Trans. 29 (1997) 759]. Although there is agreement that the form of the learning curve is as presented by [J. Aeronaut. Sci. 3 (1936) 122], scientists and practitioners have not yet developed a full understanding of the behavior and factors affecting the forgetting process. The paucity of research on forgetting curves has been attributed to the practical difficulties involved in obtaining data concerning the level of forgetting as a function of time [IIE Transactions 21 (1989) 376]. The learn–forget curve model (LFCM) was shown to have many advantages over other theoretical models that capture the learning–forgetting relationship. However, the deficiency of the LFCM is in the assumption that the time for total forgetting is invariant of the experience gained prior to interruption. This paper attempts to correct this deficiency by incorporating the findings of [Int. J. Ind. Ergon. 10 (1992) 217] into the LFCM. Numerical examples are used to illustrate the behavior of the modified LFCM (MLFCM) and compare results to those of the LFCM.     

Numerical simulation of transient heat transfer for tomato paste in semi rigid aluminum container

In this study, numerical model of heat transfer for tomato paste in semi-rigid aluminum container was developed by Fluent software 6.3.26. Grid independence was recognized. The impact of head space (air and water -vapor) and buoyancy force on heat transfer were investigated. Simulation results showed slowest heating zone (SHZ) located in (?11.676?<?X?<??10.738, 0.183?<?Y?<?1.269 and 4.417?<?Z?<?5.560) for model with air head space and in (?11.166?<?X?<??11.370, 0.762?<?Y?<?1.21 and 5.480?<?Z?<?5.506) for model with water–vapor head space in Cartesian system coordinate. A thermocouple was connected to container at (0, 0, 10 cartesian system coordinate) to get experimental data during process. Comparing temperatures of experimental model and predicted model (with head space) illustrated no significant difference (p?<?0.05).     

Simulation of a localized heating system for broiler brooding to improve energy performance

The aim of this work is to evaluate the performance of an innovative localized solar‐assisted pen heating system for brooding using a 3D computational simulation model of the heated space. The warm air‐curtained pen ensures acceptable temperature, air velocity, relative humidity, and air quality that meet the ventilation and heat requirements for a typical pen of 100 chicks as recommended by the American Society of Heating Refrigeration and Air Conditioning Engineers and American Society of Agricultural and Biological Engineers. The supply flow characteristics and the simulated velocity and temperature field of the curtained region were determined such that they meet the ventilation requirements and comfort criteria. Results show that air supplied at 40°C is capable of delivering the desired microenvironment at bird level while the heat input to the unit is 685 W when outdoor temperature is ?5°C. The system's energy performance was then analyzed using a prototype of 16 pens. The energy consumption of the new heating scheme consumed one third of the energy required by conventional non‐localized system. Moreover, integrating the new design with a solar system utilizing parabolic concentrators provided 72% of the power load from solar energy during a winter flock operation and 100% during other seasons. Copyright © 2013 John Wiley & Sons, Ltd.     

Acoustic damping flexible polyurethane foams: Effect of isocyanate index and water content on the soundproofing

High-efficiency sound absorbing flexible polyurethane foams (FPUFs) are manufactured using nonpolar polyester resin, methylene diphenyl diisocyanate, and other reagents by one-shot bulk polymerization. In this study, the impact of the isocyanate index (90, 100, and 110) and water content (2.5 and 5%) on the microphase separation and soundproofing behavior of FPUFs are examined using atomic force microscopy, Fourier transform infrared spectroscopy, optical microscope, and an impedance tube device. The results reveal that the increase of the isocyanate index and water content leads to the increase of the cell size, cell size distribution, open-cell content, cell wall roughness, and microphase separation. Also, maximum sound absorption coefficient (α) reaches to 0.98 and the average of α in the frequency range of 1500–4000 Hz increases from 0.7 to 0.87 by increasing the water content from 2.5 to 5% and isocyanate index from 90 to 110; therefore, acoustic damping performance enhances up to 26.24% due to the synergic effects of microphase separation on the viscose media formation, open-cell content, cell wall roughness, cell size, and cell size distribution. In conclusion, FPUFs with an optimal amount of microphase separation and drainage flow can be a promising candidate for sound insulating materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47363.     

Experimental investigation on the mean drop size and drop size distribution in an L-shaped pulsed sieve-plate column

Vertical pulsed extraction columns cannot be employed in applications with height limitations. On the other hand, the horizontal extraction columns have low throughput, which affects their applicability in industrial applications. Therefore, there is a need to design a new type of extractors for such circumstances. In this paper, an experimental study on drop sizes has been implemented in a novel L-shaped pulsed sieve-plate extraction column in the absence and presence of mass transfer. Moreover, new correlations are developed for prediction of the mean drop size and size distribution using the log-normal probability density function.     

Thermogravimetric analysis and kinetic study of heavy oil pyrolysis

Pyrolysis, so-called devolatilization, is one of the first steps of all thermochemical processes occurring in an inert atmosphere. The authors discuss the main kinetic features of heavy oil pyrolysis, on the basis of the data derived m from a TGA analysis and by using a kinetic model. The samples were heated over a range of temperature from 400 K to 430°C at various heating rates between 10 and 80°C/min. Experimental results showed that the effect of time is considerable in the case of tar conversion, compared to char and gases.