Enhancement of Strength–Ductility Balance of the Laser Melting Deposited 12CrNi2 Alloy Steel Via Multi-step Quenching Treatment

A ferrite–austenite 12CrNi2 alloy steel additively manufactured by laser melting deposition(LMD) was heat treated by direct quenching(DQ) and tempering inter-critical quenching(TIQ) at 800 ℃ for enhancing its strength–ductility balance. Both heat-treated alloy steels have the martensite–ferrite dual-phase(DP) microstructures. The volume fractions of martensite in the two treated alloy steels are nearly similar(～ 85 vol%), while the sizes of the prior austenitic grain for martensite are different. The martensite-dominated DP microstructure resulted in an obvious improvement in strength–ductility balance of the alloy steel. Compared with the DQ treatment, the multi-step TIQ treatment caused the strength–ductility balance of the alloy steel to be enhanced due to its higher total elongation. The better ductility of the TIQ-treated alloy steel can be attributed to the optimization of the microstructure. The preferred orientation of ferritic grain in the as-deposited alloy steel which was adverse to plastic deformation through dislocation slip was eliminated via the multi-step TIQ treatment. Moreover, the TIQ treatment promoted the formation of finer-grained martensite with larger areas of grain boundaries and twinning boundaries which resulted in the enhancement of the coordinated deformability of the martensite with the ferrite.     

Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication

An environmental friendly regenerated cellulose membrane (RCM) was successfully prepared via NaOH/urea aqueous solution system by utilizing recycled newspaper (RNP) as the cellulose source. The morphological and chemical structure of resulting membrane were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD) spectroscopy, and thermogravimetric analysis (TGA). Results from FTIR and XRD verified that the transparent RCM possesses cellulose II structure. SEM observation revealed that the transparent RCM consist of homogeneous dense symmetric membrane structure and composed of a skin layer with mean roughness parameter R_a, obtained from AFM analysis of 29.53 nm. Pure water flux, water content, water contact angle, porosity, and pore size of the resulting membrane were also measured. This study promotes the potential of the cellulose‐based membrane obtained from low cost cellulose source for application in filtration and separation system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42684.     

Influence of polymer morphology on the adsorption behaviors of molecularly imprinted polymer‐methacrylic acid functionalized β‐cyclodextrin

The influence of molecularly imprinted polymer‐methacrylic acid functionalized β‐cyclodextrin (MIP(MAA‐β‐CD)) morphology on the adsorption behavior studies towards benzylparaben (BzP) was explored. The effects of time, concentration, and temperature towards BzP uptake were extensively evaluated. The adsorption performance of MIP(MAA‐β‐CD) was compared with that on the molecularly imprinted polymer‐methacrylic acid (MIP(MAA)) synthesized without β‐CD. The MIP(MAA‐β‐CD) was synthesized to obtain a spherical and spongy‐porous texture with a broad pore size distribution. The MIP(MAA‐β‐CD) showed fast kinetic and the intra‐particle diffusion model demonstrated a three step (surface and pore) adsorption process. The Koble‐Corrigan isotherm was the most suitable model for data fitting, which indicated that MIP(MAA‐β‐CD) had homogeneous and heterogeneous surfaces. This finding clearly demonstrated that the large uptake and strong affinity of MIP(MAA‐β‐CD) did not only probably result from the monomer‐template interactions, but also due to the morphological MIP(MAA‐β‐CD) structure. In contrary to MIP(MAA‐β‐CD), MIP(MAA) synthesized with uniform morphology and narrow pore size distribution had lower adsorption capacities and its kinetic data fitted the pseudo‐second order diffusion model, indicating a two‐step (surface only) adsorption process. The MIP(MAA) adsorption process followed the Langmuir isotherm model referred to solely homogeneous uptake. The calculated thermodynamic parameters showed that the BzP uptake was exothermic, spontaneous, and physisorption process onto MIPs, which supported the results of kinetics and isotherm adsorption data. This study clearly revealed that the presence of β‐CD improved the morphology of synthesized MIP, and automatically enhanced the adsorption behavior of MIP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42720.     

Horizontal bracing to enhance progressive collapse resistance of steel moment frames

In this paper, the effect of horizontal bracing on enhancing the resistance of steel moment frames against progressive collapse is investigated. Previously designed 6 bay by 3 bay 18‐story steel frame prototype building with 6 m bay span (namely, unbraced frame), which was susceptible to progressive collapse, is retrofitted by four types of horizontal bracing systems on the perimeter of the topmost story and analyzed using 3D nonlinear dynamic method. Six different cross‐sections for each bracing system type are considered, and the capacity curves for each model are obtained. Three column removal circumstances, namely, Edge Short Column, First Edge Long Column, and Edge Long Column are considered in this paper. The results imply that horizontal bracing would increase the resistance of moment frames against progressive collapse. However, one of the bracing types in which axial compressive force is created in braces is not appropriate for retrofitting.     

Framing a new discourse on petromodernity: the global petroleumscape and petroleum modernism*

The concept of the Global Petroleumspace is an analytical tool which engages the roles which different oil actors play in the development of new urban ideas and built forms. Coined by Hein, this concept contributes to enriching our understanding of globalization, modernity, and architectural history and their impacts on space through time. Petroleum is modern industry’s fuel par excellence. For much of the world, it is the arrival of petroleum on the local scene that introduces modernity with its attendant spaces, forms, materials, and discourses. To frame this new discourse on urban development and petromodernity, three events were organized: ‘Petroleumscape Roundtable’ held as part of the 17th IPHS Conference at TU Delft, ‘Petroleum Modernism Symposium’, organized at the Illinois Institute of Technology, and ‘The Global Petroleumscape Conference’ held at the Faculty of Architecture at TU Delft. This article briefly recounts and reflects upon the scholarly discussions which took place at these events, in order to outline an emergent discourse on petroleum’s imbrication in architecture and planning.     

Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

Recently, graphene and its derivatives have been used to develop polymer composites with improved or multifunctional properties. Exfoliated graphite nanoplatelets (GNP) reinforced composite materials based on blend of polyethylene terephthalate (PET), and polypropylene (PP) compatibilized with styrene–ethylene–butylene–styrene‐g‐maleic anhydride is prepared by melt extrusion followed by injection molding. Characterization of the composites' microstructure and morphology was conducted using field emission scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). Tensile and impact strengths of test specimens were evaluated and the results showed maximum values at 3phr GNP in both the cases. Morphological studies showed that the GNPs were uniformly dispersed within the matrix. Results from XRD analysis showed uniformly dispersed GNPs, which may not have been substantially exfoliated. FTIR spectroscopy did not show any significant change in the peak positions to suggest definitive chemical interaction between GNP and the matrix. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40582.     

Tocotrienol Rich Fraction Reverses Age-Related Deficits in Spatial Learning and Memory in Aged Rats

Little is known about the effect of vitamin E on brain function. Therefore, in this study we evaluated the effect of tocotrienol rich fraction (TRF) on behavioral impairment and oxidative stress in aged rats. Thirty-six male Wistar rats (young: 3-months-old; aged: 21-months-old) were treated with either the control (olive oil) or TRF (200 mg/kg) for 3 months. Behavioral studies were performed using the open field test and Morris water maze (MWM) task. Blood was taken for assessment of DNA damage, plasma malondialdehyde (MDA) and vitamin E, and erythrocyte antioxidant enzyme activity. Brains were also collected to measure vitamin E levels. Results showed that aged rats exhibited reduced exploratory activity, enhanced anxiety and decreased spatial learning and memory compared with young rats. DNA damage and plasma MDA were increased, and vitamin E levels in plasma and brain were reduced in aged rats. Aged rats supplemented with TRF showed a markedly reduced level of anxiety, improved spatial learning and memory, reduced amount and severity of DNA damage, a reduced level of MDA, and increased levels of antioxidant enzyme activity and plasma/brain vitamin E compared with age-matched controls. In conclusion, TRF supplementation reverses spatial learning and memory decline and decreases oxidative stress in aged rats.     

Gut Microbiota and Short Chain Fatty Acids: Implications in Glucose Homeostasis

Gut microbiota encompasses a wide variety of commensal microorganisms consisting of trillions of bacteria, fungi, and viruses. This microbial population coexists in symbiosis with the host, and related metabolites have profound effects on human health. In this respect, gut microbiota plays a pivotal role in the regulation of metabolic, endocrine, and immune functions. Bacterial metabolites include the short chain fatty acids (SCFAs) acetate (C2), propionate (C3), and butyrate (C4), which are the most abundant SCFAs in the human body and the most abundant anions in the colon. SCFAs are made from fermentation of dietary fiber and resistant starch in the gut. They modulate several metabolic pathways and are involved in obesity, insulin resistance, and type 2 diabetes. Thus, diet might influence gut microbiota composition and activity, SCFAs production, and metabolic effects. In this narrative review, we discuss the relevant research focusing on the relationship between gut microbiota, SCFAs, and glucose metabolism.     

An Overview on SARS‑CoV‑2(COVID‑19)and Other Human Coronaviruses and Their Detection Capability via Amplification Assay,Chemical Sensing,Biosensing,Immunosensing,and Clinical Assays

A novel coronavirus of zoonotic origin(SARSCoV-2)has recently been recognized in patients with acute respiratory disease.COVID-19 causative agent is structurally and genetically similar to SARS and bat SARS-like coronaviruses.The drastic increase in the number of coronavirus and its genome sequence have given us an unprecedented opportunity to perform bioinformatics and genomics analysis on this class of viruses.Clinical tests like PCR and ELISA for rapid detection of this virus are urgently needed for early identification of infected patients.However,these techniques are expensive and not readily available for point-of-care(POC)applications.Currently,lack of any rapid,available,and reliable POC detection method gives rise to the progression of COVID-19 as a horrible global problem.To solve the negative features of clinical investigation,we provide a brief introduction of the general features of coronaviruses and describe various amplification assays,sensing,biosensing,immunosensing,and aptasensing for the determination of various groups of coronaviruses applied as a template for the detection of SARS-CoV-2.All sensing and biosensing techniques developed for the determination of various classes of coronaviruses are useful to recognize the newly immerged coronavirus,i.e.,SARS-CoV-2.Also,the introduction of sensing and biosensing methods sheds light on the way of designing a proper screening system to detect the virus at the early stage of infection to tranquilize the speed and vastity of spreading.Among other approaches investigated among molecular approaches and PCR or recognition of viral diseases,LAMP-based methods and LFAs are of great importance for their numerous benefits,which can be helpful to design a universal platform for detection of future emerging pathogenic viruses.