The organization and postnatal development of the commissural projection of the rat somatic sensory cortex

Anterograde and retrograde tracing experiments have been used to demonstrate the origin and terminal distribution of commissural fibers in the first somatosensory cortex (SI) of the rat. The commissural fibers originate from pyramidal cells of all layers, but predominantly from layers III and V. The fibers terminate in a series of approximately vertical bands. In each of these there are concentrations of terminals extending from the inner portion of the molecular layer to the deep portion of layer III as well as in the superficial part of layer V, and in layer VI. Discrete vertical bands of cortex are reciprocally connected across the midline to give both the origin and terminal regions of the projection a patchy or "columnar" appearance. The commissural fibers arise from and terminate in areas of the cortex that lie between and alongside the aggregations of granule cells that distinguish SI of the rat. No commissural fibers terminate within the aggregations of layer IV cells themselves but the more superficial terminal ramifications may come to overlie these aggregations. A heterotopic projection to the contralateral second somatosensory cortex has been observed and is similar in form to the homotopic projection to SI. Many commissural fibers have crossed the midline in the corpus callosum by the day of birth but lie in the underlying white matter and do not enter the cortical plate until at least the third postnatal day. During the first postnatal week these fibers grow somewhat diffusely into the maturing cortex and their topographic and laminar pattern of distribution attains its adult characteristics by the end of the first week. Commissural axons, thus, arise from immature cells but the maturation of cell form seems to precede the ingrowth of these axons and the acquisition of commissural synapses.     

Cell morphology and focal adhesion location alters internal cell stress

Extracellular mechanical cues have been shown to have a profound effect on osteogenic cell behaviour. However, it is not known precisely how these cues alter intracellular mechanics to initiate changes in cell behaviour. In this study, a combination of in vitro culture of MC3T3-E1 cells and finite-element modelling was used to investigate the effects of passive differences in substrate stiffness on intracellular mechanics. Cells on collagen-based substrates were classified based on the presence of cell processes and the dimensions of various cellular features were quantified. Focal adhesion (FA) density was quantified from immunohistochemical staining, while cell and substrate stiffnesses were measured using a live-cell atomic force microscope. Computational models of cell morphologies were developed using an applied contraction of the cell body to simulate active cell contraction. The results showed that FA density is directly related to cell morphology, while the effect of substrate stiffness on internal cell tension was modulated by both cell morphology and FA density, as investigated by varying the number of adhesion sites present in each morphological model. We propose that the cells desire to achieve a homeostatic stress state may play a role in osteogenic cell differentiation in response to extracellular mechanical cues.     

Invited review: Genetic considerations for various pasture-based dairy systems

Pasture-based dairy systems use grazing to supply significant percentages of the dry matter intake of cows and heifers. Such systems vary from those for which pasture is used only as a supplemental feed for cows primarily fed a total mixed ration to those for which pasture is the primary source of dry matter for the herd. Cows that are optimal in a pasture system share many general characteristics with cows that are appropriate for a nonpasture system, including feed efficiency, maintenance of body condition, reproductive fitness, udder health, longevity, and the ability to adapt to various management systems. However, in such divergent feeding systems, the relative importance of various traits can differ. In pasture systems where cow nutrient demand intentionally coincides with seasonal forage availability, the focus of selection has emphasized fertility and other fitness traits, as well as yields of milk or milk components. Breeds or strains with higher yields of protein and fat typically have advantages in grazing systems that supply milk to solids-based or cheese markets. Holstein cows with high percentages of North American ancestry can work well in grazing systems that include supplemental concentrates or partial mixed rations, particularly if calving intervals are less restrictive. Crossbred cows can be selected for use in specific grazing systems as well as for specific milk markets, with the added advantage of heterosis. Breeds and crosses with high fertility are important for seasonal breeding and calving. The ability of cattle to both milk and maintain sufficient body condition for reproduction is important for any dairy production system but is critical in a seasonal system. Dairy farms that depend on pasture for most of dry matter for cows typically have lower production per cow than nongrazing dairies but have the potential to be economically competitive because of lower operating and overhead costs. Although the principles of selection are similar across a variety of pasture-based and nonpasture systems, we document from studies and observations covered herein that optimal breeds, breed strains, and selection strategies can differ based on varying management constraints and objectives.     

Estrogen content of dairy and swine wastes

Naturally occurring estrogens in animal wastes may cause negative environmental impacts, yet their abundance in animal waste treatment and storage structures is poorly documented. To better quantify estrogen concentrations in animal wastes, multiple waste samples were collected from treatment and storage structures at dairy and swine facilities and analyzed for concentrations of 17beta-estradiol (E2), estrone (E1), and 17alpha-estradiol by gas chromatography-mass spectroscopy and by enzyme linked immunosorbent assay (E2 only). Mass ratios of each estrogen to the macronutrients nitrogen, phosphorus, and potassium were also determined. Because manure application rates are typically macronutrient-based, estrogen to macronutrient ratios are proportional to areal mass application rates of estrogen to fields. Swine farrowing waste (from farrowing sows and piglets) had the highest ratios of E2 to macronutrients. Mean ratios in swine farrowing waste were roughly twice those in swine finishing waste (from growing male and nonpregnant female animals) and more than four times higher than those in dairy waste (from lactating cows in various stages of their reproductive cycles); these differences were statistically significant (alpha = 0.05). Estrone followed a similar trend. In contrast, ratios of 17alpha-estradiol to macronutrients were highest in dairy operations. These results can be used to better predict estrogen loading rates on fields receiving swine and dairy wastes.     

Ultrafine particle concentrations and exposures in seven residences in northern California

Human exposures to ultrafine particles (UFP) are poorly characterized given the potential associated health risks. Residences are important sites of exposure. To characterize residential exposures to UFP in some circumstances and to investigate governing factors, seven single-family houses in California were studied during 2007-2009. During multiday periods, time-resolved particle number concentrations were monitored indoors and outdoors and information was acquired concerning occupancy, source-related activities, and building operation. On average, occupants were home for 70% of their time. The geometric mean time-average residential exposure concentration for 21 study subjects was 14,500 particles per cm(3) (GSD = 1.8; arithmetic mean ± standard deviation = 17,000 ± 10,300 particles per cm(3)). The average contribution to residential exposures from indoor episodic sources was 150% of the contribution from particles of outdoor origin. Unvented natural-gas pilot lights contributed up to 19% to exposure for the two households where present. Episodic indoor source activities, most notably cooking, caused the highest peak exposures and most of the variation in exposure among houses. Owing to the importance of indoor sources and variations in the infiltration factor, residential exposure to UFP cannot be characterized by ambient measurements alone. PRACTICAL IMPLICATIONS: Indoor and outdoor sources each contribute to residential ultrafine particle (UFP) concentrations and exposures. Under the conditions investigated, peak exposure concentrations indoors were associated with cooking, using candles, or the use of a furnace. Active particle removal systems can mitigate exposure by reducing the persistence of particles indoors. Eliminating the use of unvented gas pilot lights on cooking appliances could also be beneficial. The study results indicate that characterization of human exposure to UFP, an air pollutant of emerging public health concern, cannot be accomplished without a good understanding of conditions inside residences.     

Effect of 2 herbal intramammary products on milk quantity and quality compared with conventional and no dry cow therapy

Dry cow therapy, administered at the end of lactation, is aimed at eliminating current and preventing future intramammary (IMM) bacterial infections and typically involves intramammary administration of antibiotics. Certified organic dairies in the United States are restricted from using antibiotics and must consider an alternative therapy or no dry cow therapy. The current study compared 2 herbal products to conventional dry cow therapy and no treatment for a total of 5 treatments over 2 trials. Trial 1 was conducted over 3 yr on 1 research farm and trial 2 included 4 commercial farms plus the research herd over 2 yr. Treatments included (1) a conventional IMM antibiotic and internal teat sealant (penicillin-dihydrostreptomycin and bismuth subnitrate; CON); (2) an herbal IMM product purported to act as a teat sealant (Cinnatube, New AgriTech Enterprises, Locke, NY; CIN); (3) an herbal IMM product (Phyto-Mast, Bovinity Health LLC, Narvon, PA; P-M); (4) Phyto-Mast and Cinnatube (PC); or (5) no dry cow therapy (NT). Each treatment group was balanced by breed, lactation number, due date, herd, and year. However, the CON treatment was used only in the research herd because of the intent to avoid antibiotic usage on the other 4 farms. Comparisons among treatments included the difference between pre- and posttreatment 305-d mature equivalent milk production (trial 1), somatic cell score change from dry-off to freshening at the cow and quarter levels (trials 1 and 2), and milk microbiology change over the dry period (trial 2). We detected no significant differences among treatments for milk yield differences between the lactation following treatment and the lactation preceding treatment. Changes in somatic cell score from one lactation to the next also did not differ significantly among treatments in either trial. Cure rates were not significantly different among treatments; only 19.6% of all quarters were infected at dry off. The proportion of quarters with new infections at 3 to 5 d postcalving did not significantly differ among treatments, except between CIN and NT. Percentages (least squares means ± standard error) of quarters with new infections were 24 ± 21% for CON, 15 ± 7% for CIN, 30 ± 10% for P-M, 32 ± 11% for PC, and 35 ± 11% for NT. The efficacy of the herbal products was similar to that of conventional therapy, and the herbal products had no apparent adverse effects.     

A multiplicative model of software defect repair times

We hypothesize that software defect repair times can be characterized by the Laplace Transform of the Lognormal (LTLN) distribution. This hypothesis is rooted in the observation that software defect repair times are influenced by the multiplicative interplay of several factors, and the lognormal distribution is a natural choice to model rates of occurrence of such phenomenon. Conversion of the lognormal rate distribution to an occurrence time distribution yields the LTLN. We analyzed a total of more than 10,000 software defect repair times collected over nine products at Cisco Systems to confirm our LTLN hypothesis. Our results also demonstrate that the LTLN distribution provides a statistically better fit to the observed repair times than either of the two most widely used repair time distributions, namely, the lognormal and the exponential. Moreover, we show that the repair times of subsets of defects, partitioned according to the Orthogonal Defect Classification (ODC) scheme also follow the LTLN distribution. Finally, we describe how the insights that lead to the LTLN repair time model allow us to consider and evaluate alternative process improvement strategies.     

Evaluation of polycaprolactone − poly‐D,L‐lactide copolymer as biomaterial for breast tissue engineering

The potential of the copolymer polycaprolactone‐co‐ poly‐d ,l ‐lactic acid (PCLLA ) as a biomaterial for scaffold‐based therapy for breast tissue engineering applications was assessed. First, the synthesized PCLLA was evaluated for its processability by means of additive manufacturing (AM ). We found that the synthesized PCLLA could be fabricated into scaffolds with an overall gross morphology and porosity similar to that of polycaprolactone. The PCLLA scaffolds possessed a compressive Young's modulus (ca 46 kPa ) similar to that of native breast (0.5 ? 25 kPa ), but lacked thermal stability and underwent thermal degradation during the fabrication process. The PCLLA scaffolds underwent rapid degradation in vitro which was characterized by loss of the scaffolds' mechanical integrity and a drastic decrease in mass‐average molar mass (M _w) and number‐average molar mass (M _n) after 4 weeks of immersion in phosphate buffer solution maintained at 37 °C. The tin‐catalysed PCLLA scaffold was also found to have cytotoxic effects on cells. Although the initial mechanical properties of the PCLLA scaffolds generally showed potential for applications in breast tissue regeneration, the thermal stability of the copolymer for AM processes, biocompatibility towards cells and degradation rate is not satisfactory at this stage. Therefore, we conclude that research efforts should be geared towards fine‐tuning the copolymer synthesizing methods. © 2016 Society of Chemical Industry     

Evaluation of rib steak colour from Friesian, Hereford and Charolais heifers pastured or overwintered prior to slaughter

Heifers (n=10) were randomly selected from the slaughter line of a local factory each month for a period of 21 months. Rib steak (sampled at the 10th rib) from the left side of each carcass was taken for analysis. The cattle breeds selected during this study were Friesian, Hereford and Charolais. The mean weight of the left side for all carcasses was 146.6 (S.E.M.= 1.0kg). Graded carcasses selected for sampling during this trial were classified using the EUROP scale and the specific heifer grades chosen were factory grades EO4L and EO4H. Initial Hunter 'a' values (on the day of arrival in the laboratory) of rib steak from heifers finished between November and March (overwintered) were significantly (P<0.001) higher than Hunter 'a' values from heifers finished between April and October (pastured). After storage at 4?°C under simulated retail display conditions for 6 days, the Hunter 'a' values for overwintered samples were also significantly (P<0.001) greater than those for pastured samples. Breed also had an effect on the colour of the meat. After storage for 6 days, Hunter 'a' values of rib steak from Charolais were significantly (P<0.05) higher than either Friesian or Hereford. Pastured heifers had significantly (P<0.05) higher levels of the monounsaturated fatty acid C16.1 in the total lipid fraction of rib steak (neutral and polar) than samples taken from overwintered heifers. Pastured heifers had significantly (P<0.01) higher levels of the polyunsaturated fatty acid (PUFA) C18.3 in the phospholipid fraction than those from overwintered cattle. However, Hereford had significantly (P<0.05) higher levels of C14.0, C16.1 and C18.0 in the phospholipid fraction than those found in Friesian and Charolais. The level of α-tocopherol in the muscle was not affected by either pasturing/overwintering or breed. However, Continental breeds had significantly (P<0.05) higher levels of α-tocopherol in adipose tissue than Friesian.