Numerical simulation of developing natural convection in an enclosure due to rapid heating

Effects of thermoacoustic wave motion on the developing natural convection process in a compressible gas-filled square enclosure were investigated numerically. In the cases considered, the left wall temperature is raised rapidly (impulsively or gradually) while the right wall is held at a specified temperature. The top and the bottom walls of the enclosure considered are thermally insulated. The numerical solutions of the full Navier-Stokes equations were obtained by employing a highly accurate flux-corrected transport algorithm for the convection terms and by a central differencing scheme for the viscous and diffusive terms. The strength of the pressure waves associated with the thermoacoustic effect and resulting flow patterns are found to be strongly correlated to the rapidity of the wall heating process. Fluid thermal diffusivity was found to affect the strength of the thermoacoustic waves and the resulting interaction with the buoyancy-induced flow.     

Methacrylic acid–acrylamide-g-poly(ethyleneterephthalate) fibres for urea hydrolysis

This paper presents the results of urease immobilization onto methacrylic acid–acrylamide grafted poly(ethyleneterephthalate) fibres. The graft yield strongly affected the maximum activity of the immobilized enzyme up to a value of 70·2%. Higher grafting caused a decline in urease activity and led to the degradation of the fibres. The minor changes observed in K_m and V_max demonstrated that the conformational changes existed during immobilization were not extensive. However, 70·2% methacrylic acid–acrylamide-g-fibres containing urease were more stable towards acidic and alkaline pH, high temperature and storage conditions compared with free enzyme. Apart from the increase in stability to heat inactivation, the initial enzymatic activity of the urease–fibre system remained almost unchanged even after 40 repeated assays corresponding to 10 h of operation in 4 months, indicating the excellent durability of the system.     

Development of an Expert System for Selection of Dam Type on Alluvium Foundations

. A knowledge-based expert system was developed to aid in the selection of the type of dam. The dam type selector expert system (DTSA ES) was designed to determine the type of dam on the alluvium foundations. Detailed expert knowledge is required to estimate the type of dam and to develop an expert system. The DTSA ES utilizes rules of thumb used by an expert for determining the selection of the type of dam. The DTSA ES was developed using a shell program. The expert system was tested on several dam sites in order to validate the decision obtained. The use of this expert system, containing knowledge about the selection of dam type, can be helpful to students, potential owners or contractors in selecting dam types. The current prototype always needs additional parameters for more detailed analyses of new developments. However, the current DTSA ES is designed to include existing information about dam types.     

HihO: accelerating artificial intelligence interpretability for medical imaging in IoT applications using hierarchical occlusion

Neural Computing and Applications - In the medical imaging domain, nonlinear warping has enabled pixel-by-pixel mapping of one image dataset to a reference dataset. This co-registration of data...     

Lung nodules detection using semantic segmentation and classification with optimal features

Neural Computing and Applications - Lung cancer is a deadly disease if not diagnosed in its early stages. However, early detection of lung cancer is a challenging task due to the shape and size of...     

Prioritized Mobile Robot Exploration Based on Percolation Enhanced Entropy Based Fast SLAM

The major aim in search and rescue using mobile robots is to detect and reach trapped survivors and to support rescue operations through disaster environments. Our motivation is based on the fact that a search and rescue (SAR) robot can navigate within and penetrate a disaster area only if the area in question possesses connected voids. Traversability or penetrability of a disaster area is a primary factor that guides the navigation of a search and rescue (SAR) robot, since it is highly desirable that the robot, without hitting a dead end or getting stuck, keeps its mobility for its primary task of reconnaissance and mapping when searching the highly unstructured environment. We propose a novel percolation guidance that collaborates with entropy based SLAM under a switching control setting the priority to either position or map accuracy. This newly developed methodology has proven to combine the superiority of both percolator guidance and entropy based prioritization so that the active SLAM becomes speedy, with high coverage rate of the area as well as increased accuracy in localization. Our percolator guidance stems from a frontier based conditioning of a-posteriori occurrences of upcoming connected voids that uses the fact that every obstacle partially seen at the frontier of the explored domain has a spatial continuity into the unexplored area. The developed modular architecture is introduced in details and demonstrative examples are provided and discussed.     

Verifying anonymity in voting systems using CSP

We present formal definitions of anonymity properties for voting protocols using the process algebra CSP. We analyse a number of anonymity definitions, and give formal definitions for strong and weak anonymity, highlighting the difference between these definitions. We show that the strong anonymity definition is too strong for practical purposes; the weak anonymity definition, however, turns out to be ideal for analysing voting systems. Two case studies are presented to demonstrate the usefulness of the formal definitions: a conventional voting system, and Prêt à Voter, a paper-based, voter-verifiable scheme. In each case, we give a CSP model of the system, and analyse it against our anonymity definitions by specification checks using the Failures-Divergences Refinement (FDR2) model checker. We give a detailed discussion on the results from the analysis, emphasizing the assumptions that we made in our model as well as the challenges in modelling electronic voting systems using CSP.     

Prediction of suspended sediment concentration from water quality variables

This study investigates use of water quality (WQ) variables, namely total chromium concentration, total iron concentration, and turbidity for predicting suspended sediment concentration (SSC). For this purpose, the artificial neural networks (ANNs) and regression analysis (RA) models are employed. Seven different RA models are constructed, considering the functional relation between measured WQ variables and SSC. The WQ and SSC data are fortnightly obtained from six monitoring stations, located on the stream Harsit, Eastern Black Sea Basin, Turkey. A total of 132 water samples are collected from April 2009 to February 2010. Model prediction results reveal that ANN is able to predict SSC from WQ data, with mean absolute error (MAE) of 10.30 mg/L and root mean square error (RMSE) of 13.06 mg/L. Among seven RA models, the best one, which has the form including all independent parameters, produces results comparable to those of ANN, with MAE = 14.28 mg/L and RMSE = 15.35 mg/L. The sensitivity analysis results reveal that the most effective parameter on the SSC is total chromium concentration. These results have time- and cost-saving implications.     

CFD SIMULATION OF THE GAS-SOLID FLOW IN THE RISER OF A CIRCULATING FLUIDIZED BED WITH SECONDARY AIR INJECTION

A comprehensive investigation was carried out to study hydrodynamics aspects of secondary air injection in circulating fluidized beds. This article presents modeling and results of computational fluid dynamics simulations of gas-solid flow in the riser section of a laboratory-scale (ID = 0.23 m, height = 7.6 m) circulating fluidized bed with a radial secondary air injector. The gas-solid flow model is based on the two-fluid (Eulerian-Eulerian) approach, where both gas and solids phases are treated as interpenetrating continua. A granular kinetic theory model is used to describe the solids phase stresses. The simulation results are compared with measured pressure drop and axial particle velocity profiles; reasonable agreement is obtained. Qualitatively, excellent agreement is obtained in predicting the increase in solids volume fraction below secondary air ports, the accumulation of solids around the center of the riser due to momentum of secondary air jets, and the absence of the solids down-flow near the wall above the secondary air injection ports, which are the prominent features of secondary air injection observed in the experiments.