Direct ethanol production from barley beta-glucan by sake yeast displaying Aspergillus oryzae beta-glucosidase and endoglucanase

Three beta-glucosidase- and two endoglucanase-encoding genes were cloned from Aspergillus oryzae, and their gene products were displayed on the cell surface of the sake yeast, Saccharomyces cerevisiae GRI-117-UK. GRI-117-UK/pUDB7 displaying beta-glucosidase AO090009000356 showed the highest activity against various substrates and efficiently produced ethanol from cellobiose. On the other hand, GRI-117-UK/pUDCB displaying endoglucanase AO090010000314 efficiently degraded barley beta-glucan to glucose and smaller cellooligosaccharides. GRI-117-UK/pUDB7CB codisplaying both beta-glucosidase AO090009000356 and endoglucanase AO090010000314 was constructed. When direct ethanol fermentation from 20 g/l barley beta-glucan as a model substrate was performed with the codisplaying strain, the ethanol concentration reached 7.94 g/l after 24 h of fermentation. The conversion ratio of ethanol from beta-glucan was 69.6% of the theoretical ethanol concentration produced from 20 g/l barley beta-glucan. These results showed that sake yeast displaying A. oryzae cellulolytic enzymes can be used to produce ethanol from cellulosic materials. Our constructs have higher ethanol production potential than the laboratory constructs previously reported.     

Raman Spectroscopic Barcode Use for Differentiation of Vegetable Oils and Determination of Their Major Fatty Acid Composition

In this study, differentiation of vegetable oils and determination of their major fatty acid (FA) composition were performed using Raman spectral barcoding approach. Samples from seven different sources (sunflower, corn, olive, canola, mustard, soybean and palm) were analyzed using Raman spectroscopy. Second derivative of the spectral data was utilized to generate unique barcodes of oils. Chemometric analyses, namely, principal component analysis (PCA) and partial least square (PLS) methods were used for data analysis. PCA was applied for classification of the samples according to the differences in their levels arising from their barcode data. A successful differentiation based on second derivative barcodes of Raman spectra (2D‐BRS) of vegetable oils was obtained. In addition, PLS method was applied on 2D‐BRS in order to determine the major FA composition of these samples. Coefficient of determination values for palmitic, stearic, oleic, linoleic, α‐linolenic, cis‐11 eicosenoic, erucic and nervonic acids were in the range of 0.970–0.989. Limit of detection and limit of quantification values were found to be satisfactory (0.09–8.09 and 0.30–26.95 % in oil) for these fatty acids . Advantages of both chemometric analysis and spectral barcoding approach have been utilized in the present study. Taking the second derivative of the Raman spectra has minimized background variability and sensitivity to intensity fluctuations. Spectral conversion to the barcodes has further increased the quality of information obtained from Raman spectra and also made it possible to improve the visualization of the data. Converting Raman spectra of oils into barcodes enables simpler presentation of the valuable information, and still allows further analysis such as classification of vegetable oils and prediction of their major fatty acids with high accuracy.     

Emulsifier‐free cationic latexes based on vinylbenzyl chloride and 2‐(dimethylamino)ethyl methacrylate with adjusted hydrophilic–hydrophobic properties

Functional emulsifier‐free cationic latexes based on styrenic monomer vinylbenzyl chloride (VBC) and acrylic monomer 2‐(dimethylamino)ethyl methacrylate (DMA) were successfully prepared with dual quaternary ammonium ions (36–63 mol %) on both monomer moieties in two‐stages. First, [2‐(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer (DMA(C₁₆)), prepared via quaternization of DMA with 1‐bromohexadecane, was utilized as a comonomer (5–20%) as well as a surfactant in the emulsion polymerization of VBC. Next, the quaternization of chloromethyl groups in the VBC moiety in latex particles with trimethylamine and N,N‐dimethylhexadecylamine created a second type of quaternized sites on the latex particles. The percentages of the quaternary ammonium ions of the first‐stage latexes (P[VBC‐DMA(C₁₆‐x)]) and the second‐stage latexes (P[VBC(R)‐DMA(C₁₆‐x)]) were determined using bromide and chloride ion‐selective electrodes. The particles were characterized with a scanning electron microscope, Zetasizer, measuring water contact angles of their pellets. The polymer structure and the alkyl group length in their quaternary ammonium ions played an important role on the sizes, zeta potentials and hydrophilic–hydrophobic balances of the latexes. The water contact angles of the pellets of the latex particles varied from 50.3 to 109.6° depending on both the polymer structure and the alkyl group length. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42775.     

Effect of Dipping Temperature and Dipping Time on Drying Rate and Color Change of Grapes

Thompson seedless grapes (Vitis vinifera) were pretreated in potassium carbonate and ethyl oleate solutions for 1, 2, and 3 min at 30, 40, 50, and 60°C and dried in a convective air dryer at 60°C. The effect of dipping time and solution temperature on drying rate and color kinetics were investigated. Grapes dipped into the solution at 60°C for 2 and 3 min had the fastest drying rate. Among the seven semi theoretical models compared, the Midilli equation best described the drying curves of grapes for all dipping pretreatments. Color data were obtained using a machine vision system in CIE L*a*b* color space. Regardless of the dipping time and temperature applied, all raisins had varying degrees of brown coloring. At all dipping times and temperatures the highest R ² value was obtained for a* values, which followed zero-order reaction kinetics during drying.     

Surface-modified alumina nanoparticles-filled aramid fiber-reinforced epoxy nanocomposites: preparation and mechanical properties

Iranian Polymer Journal - Surface of Al2O3 nanoparticles was modified with a silane coupling agent, and aramid fiber-reinforced epoxy nanocomposites were produced using these particles. Three...     

Synthesis,characterization of poly‐2‐ (2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6, 7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile: Investigation of antibacterial activity and optical properties

The oxidative polycondensation reaction conditions of 2‐(2‐hydroxybenzylideneamino)‐6‐phenyl‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carbonitrile were examined. The magnitude of the reflectance of the polymer decreases sharply with increasing of wavelength up to 524 nm, then reflectance of the polymer increases slowly with increasing of wavelength. The refractive index values of the polymer vary from 1.474 to 2.350. The E_p and E_d values of the polymer were found to be 4.56 and 7.068 eV, respectively. Absorption coefficient K of the polymer is of the order 817.062–1434.77 m^?1. Angle values of incidence and refraction of the polymer vary from 57.36 to 66.95° and from 23.05 to 32.65°, respectively. The film‐phase thickness of the polymer increases with increasing photon energy. The thickness, d, of the polymer was of the order 439.3–4184.7 Å for 190 and 1100 nm, respectively. The real part of dielectric constant of the polymer decreases slowly with increasing of frequency up to about 600 THz, then the real part of dielectric constant of the polymer increases sharply with increasing of frequency. The real and imaginary parts of dielectric constant of the polymer vary from 2.17 to 5.52 and from 5.81 × 10^?5 to 3.58 × 10^?4, respectively. Finally, polymer was tested for antibacterial activities against some bacteria. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Characterization of tributyrin hydrolysis by immobilized lipase on woolen cloth using conventional batch and novel spinning cloth disc reactors

Optimal loading and operating conditions for a new, superior immobilization of amano lipase from Pseudomonas fluorescens on woolen cloth were determined. The optimal enzyme loading was 46.8 mg g dry cloth⁻¹ with activity of 200 U. A batch reactor was used to characterize process conditions important to industrial application of the wool immobilized lipase. The optimal pH for immobilized lipase in tributyrin hydrolysis was 7, slightly lower than that of free lipase (pH 8). The optimal temperature for both free and immobilized lipase was 45 °C. The immobilized lipase was more stable to reuse than some other lipase immobilizations, maintaining 85% of its activity after 6 long term runs and 75.8% of the original activity after storage of 40 weeks at 4 °C. The thermal stability of lipase was improved by 2.4 times after immobilization. The thermal deactivation rate of immobilized lipase followed the Arrhenius law with E_d = 199 kJ mol⁻¹. The Michaelis–Menten constant (K_m) of the lipase increased from 1.63 mM to 4.48 mM after immobilization. The immobilized lipase was also successfully applied for tributyrin hydrolysis in a novel enzyme process intensification technology – the spinning cloth disc reactor (SCDR): conversion increased by around 13% under similar conditions compared to a conventional batch stirred tank reactor. The SCDR is therefore key to exploiting the advantages of the wool immobilized lipase developed in this work.     

Investigation of UV and I–V characteristics of high refractive index polymer thin film for optoelectronic applications

In this study, high refractive index polymer (HRIP) [poly(pentabromobenzyl methacrylate-co-glycidyl methacrylate)] was investigated to obtain its optical and electrical performance for optoelectronic applications. UV characteristics of the polymer in solution of tetrahydrofuran were obtained and optical band gap energy of the polymer was calculated as 3.8 eV. I–V characteristics of the polymer were investigated after HRIP thin film was prepared using spin coating technique. The electrical parameters such as barrier height Φ_Bo, ideality factor n and reverse saturation current I_o were extracted from the forward biasing I–V characteristics. At the same time, series resistance R_s and Φ_Bo were determined by using a modified Norde function combined with conventional forward I–V method.     

From a Non-Local Ambrosio-Tortorelli Phase Field to a Randomized Part Hierarchy Tree

In its most widespread imaging and vision applications, Ambrosio and Tortorelli (AT) phase field is a technical device for applying gradient descent to Mumford and Shah simultaneous segmentation and restoration functional or its extensions. As such, it forms a diffuse alternative to sharp interfaces or level sets and parametric techniques. The functionality of the AT field, however, is not limited to segmentation and restoration applications. We demonstrate the possibility of coding parts—features that are higher level than edges and boundaries—after incorporating higher level influences via distances and averages. The iteratively extracted parts using the level curves with double point singularities are organized as a proper binary tree. Inconsistencies due to non-generic configurations for level curves as well as due to visual changes such as occlusion are successfully handled once the tree is endowed with a probabilistic structure. As a proof of concept, we present (1) the most probable configurations from our randomized trees; and (2) correspondence matching results between illustrative shape pairs. The work is a significant step towards establishing exponentially decaying diffuse distance fields as bridges between low level visual processing and shape computations.     

Variation of part thickness and compaction pressure in vacuum infusion process

In vacuum infusion (VI), it is difficult to manufacture a composite part with small dimensional tolerances, since the thickness of the part changes during resin injection. This change of thickness is due to the effect of varying compaction pressure on the upper mold part, a vacuum bag. In this study, random fabric layers with an embedded core distribution medium is used. The thickness of the composite part and resin pressure are monitored using multiple dial gages and pressure transducers; the results are compared with the model developed by Correia et al. [Correia NC, Robitaille F, Long AC, Rudd CD, Simacek P, Advani SG. Analysis of the vacuum infusion molding process: I. Analytical formulation. Composites Part A: Applied Science and Manufacturing 26, 2005. p. 1645–1656]. To use this model, two material characteristics databases are constructed based on the process parameters: (i) the thickness of a dry/wet fabric preform at different compaction pressures, and (ii) the permeability of the preform at different thicknesses. The dry-compacted preform under vacuum is further compacted due to fiber settling in wet form after resin reaches there; the part thickens afterwards as the resin pressure increases locally. The realistic model solution can be achieved only if the compaction characterization experiments are performed in such a way that the fabric is dry during loading, and wet during unloading, as in the actual resin infusion process. The model results can be used to design the process parameters such as vacuum pressure and locations of injection and ventilation tubes so that the dimensional tolerances can be kept small.