Porous cellulose acetate membrane prepared by thermally induced phase separation

Microporous cellulose acetate membranes were prepared by a thermally induced phase separation (TIPS) process. Two kinds of cellulose acetate with acetyl content of 51 and 55 mol % and two kinds of diluents, such as 2‐methyl‐2,4‐pentandiol and 2‐ethyl‐1,3‐hexanediol, were used. In all polymer‐diluent systems, cloud points were observed, which indicated that liquid–liquid phase separation occurred during the TIPS process. The growth of droplets formed after the phase separation was followed using three cooling conditions. The obtained pore structure was isotropic, that is, the pore size did not vary across the membrane. In addition, no macrovoids were formed. These pore structures were in contrast with those usually obtained by the immersion precipitation method. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3951–3955, 2003     

<Emphasis Type="Italic">Brassica rapa</Emphasis> var. <Emphasis Type="Italic">japonica</Emphasis> Leaf Extract Mediated Green Synthesis of Crystalline Silver Nanoparticles and Evaluation of Their Stability,Cytotoxicity and Antibacterial Activity

Silver nanoparticles (AgNPs) were successfully synthesized from the reduction of Ag⁺ using AgNO₃ solution as a precursor and Brassica rapa var. japonica leaf extract as a reducing and capping agent. This study was aimed at synthesis of AgNPs, exhibiting less toxicity with high antibacterial activity. The characterization of AgNPs was carried out using UV–Vis spectrometry, energy dispersive X-ray spectrometry, fourier transform infrared spectrometry, field emission scanning electron microscopy, X-ray diffraction, atomic absorption spectrometry, and transmission electron microscopy analyses. The analyses data revealed the successful synthesis of nano-crystalline Ag possessing more stability than commercial AgNPs. The cytotoxicity of Brassica AgNPs was compared with commercial AgNPs using in vitro PC12 cell model. Commercial AgNPs reduced cell viability to 23% (control 97%) and increased lactate dehydrogenase activity at a concentration of 3 ppm, whereas, Brassica AgNPs did not show any effects on both of the cytotoxicity parameters up to a concentration level of 10 ppm in PC12 cells. Moreover, Brassica AgNPs exhibited antibacterial activity in terms of zone of inhibition against E. coli (11.1?±?0.5 mm) and Enterobacter sp. (15?±?0.5 mm) which was higher than some previously reported green-synthesised AgNPs. Thus, this finding can be a matter of interest for the production and safe use of green-AgNPs in consumer products.     

Ultra-high-precision time control system over any long time delay for laser pump and synchrotron x-ray probe experiment

An ultra-high-precision clock system for long time delay has been developed for picosecond time-resolved x-ray diffraction measurements using synchrotron radiation (SR) pulses and synchronized femtosecond laser pulses. The time delay control between pump laser pulse and the probe SR pulse was achieved by combining an in-phase quadrature modulator and a synchronous counter. This method allowed us to change the delay time by a nearly infinite amount while maintaining the precision of +/-8.40 ps. Time-resolved diffraction measurements using the delay control system were demonstrated for precise measurement of an acoustic velocity in a single crystal of gallium arsenide.     

The Effects of Different Types of Maleic Anhydride-Modified Polypropylene on the Physical and Mechanical Properties of Polypropylene-based Wood/Plastic Composites

Maleic anhydride-modified polypropylene (MAPP) is a compatibilizer used to improve the physical and mechanical properties of many wood/plastic composites (WPCs). The properties of WPCs containing MAPP differ according to the characteristics of the specific MAPP that it is used. In this study, the physical and mechanical properties, including shear viscosity, of polypropylene-based WPCs containing different types of MAPP were investigated before and after water absorption. The shear viscosity of MAPP increased with increasing molecular weight, but remained nearly constant for WPCs containing different types of MAPP. In dry conditions, the strongest WPC contained the MAPP with the highest acid value. The highest flexural modulus was observed with the WPC containing the MAPP with the highest molecular weight. In wet conditions, the WPC exhibiting the best mechanical properties contained a MAPP with a molecular weight of 58,000.     

Effects of the introduction of the discrete energy loss process into Monte Carlo simulation of electron scattering

First, the single scattering model is briefly described. Next, the hybrid model is explained, which takes into consideration a part of the discrete energy loss processes. The Vriens or the Gryzinski cross section is used for core electron ionizations, and the Moller cross section for free electron excitations. The model is applied to the calculations of the energy distribution of transmitted electrons through a thin film and the depth distribution of generated x-rays. From comparisons among the calculated results with and without energy straggling and experimental data, it is found that the Gryzinski cross section shows the best result.     

Spectroscopic and Photoluminescent Properties of Indium Zinc Oxide (IZO) and IZO/Ag/IZO Sandwiched Film

We report the ellipsometric and photoluminescence (PL) properties of Indium zinc oxide (IZO) films, which were grown by radio frequency sputtering under Ar and O₂ atmospheres. IZO films grown under an O₂ atmosphere (IZO (O₂)) showed enhanced PL properties when compared to the films grown under an Ar atmosphere (IZO (Ar)), particularly with respect to the band-edge emission. The enhancement of band-edge emission can be attributed to the reduction in the non-emissive defect states related to oxygen vacancies, which were repaired by sputtering under O₂ atmosphere, whereas the PL enhancement in green region is probably due to the formation of the different types of defects under the excess oxygen environment. This was also supported by the results of time-resolved PL measurements, where the band-edge emission of IZO (Ar) showed rapid decay with a 50 ps lifetime, which indicates the dominance of the relaxation pathway to underlying defect states. In contrast, the PL decay profiles of IZO (O₂) for band-edge and emissive defect states showed moderate decay with time-constants of 2.3 ns and 5.7 ns, respectively. The exciton relaxation dynamics were sensitive to the presence and its kinds of defect states, which were controlled by the growth conditions.     

高El和高λ型980MPa级冷轧钢板的特性

近年来,超高强度薄钢板越来越多地用于汽车车身部件,以提高汽车冲撞安全性和减轻车身重量,从而减少气体排放,保护环境。为适应这种需求．神户制钢已开发出几种980MPa级冷轧薄钢板。介绍了新开发的两种980MPa级冷轧薄钢板的特点：由于延展性和拉伸凸缘性的良好匹配而具有优良的成形性,同时还具有包括焊接性和化成处理性在内的良好的应用性能。     

Characterization of new types of mannosylerythritol lipids as biosurfactants produced from soybean oil by a basidiomycetous yeast, Pseudozyma shanxiensis

Mannosylerythritol lipids (MELs) are glycolipid biosurfactants produced by the yeast strains of the genus Pseudozyma. These show not only the excellent surface-active properties but also versatile biochemical actions. In course of MEL production from soybean oil by P. shanxiensis, new extracellular glycolipids (more hydrophilic than the previously reported MELs) were found in the culture medium. As a result of the structural characterization, the glycolipids were identified as a mixture of 4-O-[(2', 4'-di-O-acetyl-3'-O-alka(e)noyl)-beta-D-mannopyranosyl]-D-erythritol and 4-O-[(4'-O-acetyl-3'-O-alka(e)noyl-2'-O-butanoyl)-beta-D-mannopyranosyl]-D-erythritol. Interestingly, the new MELs possessed a much shorter chain (C(2) or C(4)) at the C-2' position of the mannose moiety compared to the MELs hitherto reported, which mainly possess a medium-chain acid (C(10)) at the position. They would thus show higher hydrophilicity and/or water-solubility, and expand the development of the environmentally advanced yeast biosurfactants.     

Microbial conversion of glycerol into glycolipid biosurfactants, mannosylerythritol lipids, by a basidiomycete yeast, Pseudozyma antarctica JCM 10317(T)

Microbial conversion of glycerol into functional bio-based materials was investigated, aiming to facilitate the utilization of waste glycerol. A basidiomycete yeast, Pseudozyma antarctica JCM 10317, efficiently produced mannosylerythritol lipids (MELs) as glycolipid biosurfactants from glycerol. The amount of MEL yield reached 16.3 g l(-1) by intermittent feeding of glycerol.     

Dual roles of proteasome in the metabolism of presenilin 1

Presenilin 1 (PS1) has been identified as a causative gene for most early-onset familial Alzheimer's disease. Biochemical studies revealed that PS1 exists predominantly as two processed fragments in cells and brain tissues. We prepared stably transfected cells expressing the wild-type and familial Alzheimer's disease-associated mutants of PS1 and investigated the enzyme that participates in the metabolism of PS1. After treatment of the cells with proteasome inhibitors, the full-length PS1 was significantly accumulated. The levels of N- and C-terminal fragments were also increased. The accumulation of PS1 with a deletion of exon 10, which is unable to be processed, on treatment of the transfected cells with lactacystin indicated that proteasome can degrade full-length PS1. A synthetic peptide that includes the processing region of PS1 was cleaved by 20S proteasome at the putative processing sites after Met288 and Glu299. Metabolic labeling experiments showed that the appearance of the N-terminal fragment was attenuated by the inhibitor. Finally, 28-kDa N- and 20-kDa C-terminal fragments were generated by purified PS1 in vitro. These data indicated that the proteasome pathway is involved in PS1 processing. These results demonstrate that the proteasome pathway plays dual roles in processing and degradation of PS1.