Growth and Potential Damage of Human Bone-Derived Cells on Fresh and Aged Fullerene C60 Films

Fullerenes are nanoparticles composed of carbon atoms arranged in a spherical hollow cage-like structure. Numerous studies have evaluated the therapeutic potential of fullerene derivates against oxidative stress-associated conditions, including the prevention or treatment of arthritis. On the other hand, fullerenes are not only able to quench, but also to generate harmful reactive oxygen species. The reactivity of fullerenes may change in time due to the oxidation and polymerization of fullerenes in an air atmosphere. In this study, we therefore tested the dependence between the age of fullerene films (from one week to one year) and the proliferation, viability and metabolic activity of human osteosarcoma cells (lines MG-63 and U-2 OS). We also monitored potential membrane and DNA damage and morphological changes of the cells. After seven days of cultivation, we did not observe any cytotoxic morphological changes, such as enlarged cells or cytosolic vacuole formation. Furthermore, there was no increased level of DNA damage. The increasing age of the fullerene films did not cause enhancement of cytotoxicity. On the contrary, it resulted in an improvement in the properties of these materials, which are more suitable for cell cultivation. Therefore, fullerene films could be considered as a promising material with potential use as a bioactive coating of cell carriers for bone tissue engineering.     

On the role of Nb-related sites of an oxidized β-TiNb alloy surface in its interaction with osteoblast-like MG-63 cells

β-Stabilized titanium (Ti) alloys containing non-toxic elements, particularly niobium (Nb), are promising materials for the construction of bone implants. Their biocompatibility can be further increased by oxidation of their surface. Therefore, in this study, the adhesion, growth and viability of human osteoblast-like MG 63 cells in cultures on oxidized surfaces of a β-TiNb alloy were investigated and compared with the cell behavior on thermally oxidized Ti, i.e. a metal commonly used for constructing bone implants. Four experimental groups of samples were prepared: Ti or TiNb samples annealed to 600 °C for 60 min in a stream of dry air, and Ti and TiNb samples treated in Piranha solution prior to annealing. We found that on all TiNb-based samples, the cell population densities on days 1, 3 and 7 after seeding were higher than on the corresponding Ti-based samples. As revealed by XPS and Raman spectroscopy, and also by isoelectric point measurements, these results can be attributed to the presence of T-Nb₂O₅ oxide phase in the surface of the alloy sample, which decreased its negative zeta (ζ)-potential in comparison with zeta (ζ)-potential of the Ti sample at physiological pH. This effect was tentatively explained by the presence of positively charged defects acting as Lewis sites of the surface Nb₂O₅ phase. Piranha treatment slightly decreases the biocompatibility of the samples, which for the alloy samples may be explained by a decrease in the number of defective sites with this treatment. Thus, the presence of Nb and thermal oxidation of β-stabilized Ti alloys play a significant role in the increased biocompatibility of TiNb alloys.     

Application of ultrasonic methods to determine elastic anisotropy of polycrystalline copper processed by equal-channel angular pressing

Anisotropy of elastic properties of ultrafine-grained polycrystalline copper after one, two and four passes of equal-channel angular pressing (ECAP) is investigated by means of ultrasonic methods. For each material, Young’s and shear moduli in the principal processing directions are evaluated and the symmetry and orientation of the anisotropy are identified. The relation between the determined symmetry and the processing mechanisms is discussed. It is shown that the material after one and two passes of ECAP exhibits a measurable anisotropy, while the material after the fourth pass behaves isotropically. Within the discussion, it is shown that the origin of the observed anisotropy may be attributed to the spatial arrangement of grain boundaries rather than to the crystallographic texture. In the light of this conclusion, the obtained results correspond well with optical and transmission electron microscopy observations of the microstructures of ECAPed materials documented in the literature.     

Semiconducting to metallic-like boron doping of nanocrystalline diamond films and its effect on osteoblastic cells

The impact of boron doping level of nanocrystalline diamond (NCD) films on the character of cell growth (i.e., adhesion, proliferation and differentiation) is presented. Intrinsic and boron-doped NCD films were grown on Si/SiO₂ substrates by microwave plasma CVD process. The boron-doped samples were grown by adding trimethylboron (TMB) to the gas mixture of methane and hydrogen. Highly resistive (0 ppm), semiconducting (133 or 1000 ppm), and metallic-like (6700 ppm) NCD films were tested as the artificial substrates for the cultivation of osteoblast-like MG 63 cells. The conductivity and surface charge increased monotonically with the increasing boron content. All NCD substrates showed good biocompatibility and stimulated the adhesion and growth of MG 63 cells. Higher osteocalcin concentration (by more than 30%) for the cells growing on 1000 and 6700 ppm boron-doped NCD films was found which indicates an enhancement in the cell growth biochemistry.     

In vitro and in vivo studies on biocompatibility of carbon fibres

In the present study we focused on the in vitro and in vivo evaluation of two types of carbon fibres (CFs): hydroxyapatite modified carbon fibres and porous carbon fibres. Porous CFs used as scaffold for tissues regeneration could simultaneously serve as a support for drug delivery or biologically active agents which would stimulate the tissue growth; while addition of nanohydroxyapatite to CFs precursor can modify their biological properties (such as bioactivity) without subsequent surface modifications, making the process cost and time effective. Presented results indicated that fibre modification with HAp promoted formation of apatite on the fibre surface during incubation in simulated body fluid. The materials biocompatibility was determined by culturing human osteoblast-like cells of the line MG 63 in contact with both types of CFs. Both tested materials gave good support to adhesion and growth of bone-derived cells. Materials were implanted into the skeletal rat muscle and a comparative analysis of tissue reaction to the presence of the two types of CFs was done. Activities of marker metabolic enzymes: cytochrome c oxidase (CCO) and acid phosphatase were examined to estimate the effect of implants on the metabolic state of surrounding tissues. Presented results evidence the biocompatibility of porous CFs and activity that stimulates the growth of connective tissues. In case of CFs modified with hydroxyapatite the time of inflammatory reaction was shorter than in case of traditional CFs.     

Describing the sorption characteristics of a ternary system of benzene (1) and alcohol (2) in a nonporous polymer membrane (3) by the Flory–Huggins model

The Flory–Huggins equation was used to describe results of total and preferential sorption measurements for the binary liquid mixture of benzene (1) and alcohol (2) in one of two nonporous polymer membranes (3), low‐density polyethylene (LDPE) and Nafion membrane. The concentration dependence of binary and ternary interaction parameters was determined. The interaction parameters for the benzene – methanol binary mixture were obtained from binary vapor‐liquid equilibrium data in the literature to decrease the number of adjusted parameters. The results show that use of a ternary interaction parameter is necessary. Data treatment was performed assuming either no crystallinity or an average crystallinity typical for the studied membranes. Subsequently, the limiting activity coefficients of solutes in LDPE were calculated from the values of the interaction parameters and their values compared to values of the limiting activity coefficients of benzene and methanol in hypothetical liquid alkane with the same density as LDPE obtained by the UNIFAC method. POLYM. ENG. SCI., 55:1187–1195, 2015. © 2014 Society of Plastics Engineers     

Novel fabrication route for porous silicon carbide ceramics through the combination of in situ polymerization and reaction bonding techniques

For the first time, an in situ polymerization technique was applied to produce mullite‐bonded porous SiC ceramics via a reaction bonding technique. In this study, SiC microsized particles and alumina nanopowders were successfully coated by polyethylene (PE), which was synthesized from the particle surface in a slurry phase reactor with a Ziegler–Natta catalyst system. The thermal studies of the resulting samples were performed with differential scanning calorimetry and thermogravimetric analysis. The morphology analysis obtained by transmission electron microscopy and scanning electron microscopy (SEM) confirmed that PE was successfully grafted onto the particle surface. Furthermore, the obtained porous ceramics were characterized in terms of their morphologies, phase composition, open porosity, pore size distribution, and mechanical strength. SEM observations and mercury porosimtery analysis revealed that the quality of the dispersion of nanosized alumina powder into the microsized SiC particles was strongly enhanced when the particles were coated by polymers with in situ polymerization. This resulted in a higher strength and porosity of the formed ceramic porous materials with respect to the traditional process. In addition, the X‐ray diffraction results reveal that the amount of mullite as the binder increased significantly for the samples fabricated by this novel method. The effects of the sintering temperature, forming pressure, and polymer content on the physical and mechanical properties of the final porous ceramic were also evaluated in this study. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40425.