Cyclohexene oxide mid‐chain functional macromonomer of poly(ε‐caprolactone): Synthesis,characterization, and photoinitiated cationic homo‐ and copolymerization

In this study, a novel well‐defined epoxy mid‐chain functional macromonomer of poly(ε‐caprolactone) (PCL) has been synthesized by ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and epoxidation on workup with 3‐chloroperoxybenzoic acid. The ROP of ε‐CL monomer in bulk at 110°C, by means of a dihydroxy functional initiator namely, 3‐cyclohexene‐1,1‐dimethanol in conjunction with stannous‐2‐ethylhexanoate, (Sn(Oct)₂), yielded a well‐defined PCL with a cyclohexene mid‐chain group. The epoxidation of the cyclohexene (CH) mid‐chain group of PCL was performed using 3‐chloroperoxybenzoic acid. GPC, IR, and ¹H‐NMR analyses revealed that a low‐polydispersity macromonomer of PCL with the desired cyclohexene oxide (CHO) functionality at the mid‐chain was obtained. The photoinduced cationic polymerizations of this macromonomer yielded comb‐shaped and graft copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Dyeing properties of textiles by Turkish hazelnut (Corylus colurna): leaves,coat, shell and dice

Turkey has a great number of hazelnut trees that possess nutritious components. However, only the inside part of the hazelnut is used as a nutrient, while the rest of it is waste. This study suggests that the waste parts of the Turkish hazelnut could be used as a natural dye for dyeing textile fabrics. The dyeing properties of the leaves, coat, shell and dice of the hazelnut were studied on wool, cotton and viscose fabric by using three different mordants: copper sulphate, iron sulphate and aluminium sulphate. The selected dyed fibre sample surfaces were observed using a scanning electron microscope. The colour strength (K/S), light, washing, rubbing, and perspiration fastness levels of the dyed fabrics were investigated. The experimental natural dyeing results indicate that waste hazelnut‐based products can be used as a natural dye for textile coloration.     

Production of nano zinc borate (4ZnO·B2O3·H2O) and its effect on PVC

In this study, nano sized zinc borate powder with a formula of 4ZnO·B₂O₃·H₂O was synthesized using 2ZnO·3B₂O₃·3.0–3.5H₂O as a starting chemical which was produced using a wet chemical method. After dissolving 2ZnO·3B₂O₃·3.0–3.5H₂O in an ammonia solution, the clear solution was boiled until a white powder formed. The resultant powder was characterized with XRD, FTIR, TGA and TEM. XRD, FTIR and TGA results proved that the powder was belonged to the 4ZnO·B₂O₃·H₂O. Nano composites of 4ZnO·B₂O₃·H₂O–polyvinylchloride (PVC) were produced by injection moulding by adding 1 and 5 wt% zinc borate powders into PVC to enhance its flame retardancy. Limiting oxygen index (LOI) of virgin PVC increased from 41% to 47% and 54% for the 1 and 5 wt% zinc borate added PVC, respectively. Nano zinc borate addition into the PVC does not have considerable negative effect on the mechanical properties of zinc borate–PVC composites even at high amounts of 5 wt%.     

Nanostructured materials with biomimetic recognition abilities for chemical sensing

Binding features found in biological systems can be implemented into man-made materials to design nanostructured artificial receptor matrices which are suitable, e.g., for chemical sensing applications. A range of different non-covalent interactions can be utilized based on the chemical properties of the respective analyte. One example is the formation of coordinative bonds between a polymerizable ligand (e.g., N-vinyl-2-pyrrolidone) and a metal ion (e.g., Cu(II)). Optimized molecularly imprinted sensor layers lead to selectivity factors of at least 2 compared to other bivalent ions. In the same way, H-bonds can be utilized for such sensing purposes, as shown in the case of Escherichia coli. The respective molecularly imprinted polymer leads to the selectivity factor of more than 5 between the W and B strains, respectively. Furthermore, nanoparticles with optimized Pearson hardness allow for designing sensors to detect organic thiols in air. The ‘harder’ MoS₂ yields only about 40% of the signals towards octane thiol as compared to the ‘softer’ Cu₂S. However, both materials strongly prefer molecules with -SH functionality over others, such as hydrocarbon chains. Finally, selectivity studies with wheat germ agglutinin (WGA) reveal that artificial receptors yield selectivities between WGA and bovine serum albumin that are only about a factor of 2 which is smaller than natural ligands.     

Performance evaluation of a submerged membrane bioreactor for the treatment of brackish oil and natural gas field produced water

Produced water, which is co-produced during oil and gas manufacturing, represents one of the largest sources of oily wastewaters. Therefore, treatment of this produced water may improve the economic viability and lead to a new source of water for beneficial use. In this study a submerged hollow fiber membrane bioreactor (MBR) has been studied experimentally for the treatment of brackish oil and natural gas field produced water. This type of wastewater is also characterized with relatively moderate to high amount of salt, oil and total petroleum hydrocarbons (TPH). However, the bacteria which are growing in conventional activated sludge and MBR cannot survive at these strict conditions, therefore acclimation of the bacteria is of vital importance. The performance of the biological system, membrane permeability, the rate and extent of TPH biodegradability have been investigated under different sludge age and F/M ratios. The results obtained by gas chromatography analyses showed that the MBR system could be very effective in the removal of TPH from produced water and a significant improvement in the effluent quality was achieved.     

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The reactives were mixed to produce a homogeneous mixture, which was placed into a 50 mm mold and cured at two different curing temperatures (60 °C and room temperature), for 24 hours. After the curing process, the strengths of the samples were tested on days 1, 7, and 28. The water absorption, porosity, chemical composition, microstructure, XRD and FTIR analyses were studied. The results showed that the sample which was cured at 60 °C (LW2) produced the maximum compressive strength for all tests, (11.03 MPa, 17.59 MPa, and 18.19 MPa) for days 1, 7, and 28, respectively. Also, the water absorption and porosity of LW2 were reduced by 6.78% and 1.22% after 28 days, respectively. The SEM showed that the LW2 sample had a denser matrix than LW1. This was because LW2 was heat cured, which caused the geopolymerization rate to increase, producing a denser matrix. However for LW1, microcracks were present on the surface, which reduced the compressive strength and increased water absorption and porosity.     

Determining Frying Oil Degradation by Near Infrared Spectroscopy Using Chemometric Techniques

A rapid method for the determination of some important physicochemical properties in frying oils has been developed. Partial least square regression (PLS) calibration models were applied to the physicochemical parameters and near infrared spectroscopy (NIR) spectral data. PLS regression was used to find the NIR region and the data pre-processing method that give the best prediction of the chemical parameters. Calibration and validation were appropriated by leave one out cross validation and test set validation techniques for predicting free fatty acids (FFA), total polar materials (cTPM; measured by chromatographic method and iTPM measured by an instrumental method), viscosity and smoke point of the frying oil samples. For PLS models using the cross validation techniques, the best correlations (r) between NIR predicted data and the standard method data for iTPM in oils were 93.79 and root mean square error of prediction (RMSEP) values were 5.53. For PLS models using the test set validation techniques, the best correlations (r) between NIR predicted data and standard method data for FFA, cTPM, viscosity and smoke point in oils were 92.58, 94.61, 81.95 and 84.07 and RMSEP values were 0.121, 3.96, 22.30 and 8.74, respectively. In conclusion, NIR technique with chemometric analysis was found very effective in predicting frying oil quality changes.     

GC–MS analysis of oxysterols and their formation in cultivated liver cells (HepG2)

Oxysterols play a key role in many (patho)physiological processes and they are potential biomarkers for oxidative stress in several diseases. Here we developed a rapid gas chromatographic-mass spectrometry-based method for the separation and quantification of 11 biologically relevant oxysterols bearing hydroxy, epoxy, and dihydroxy groups. Efficient chromatographic separation (resolution ≥ 1.9) was achieved using a medium polarity 35%-diphenyl/65%-dimethyl polysiloxane stationary phase material (30 m × 0.25 mm inner diameter and 0.25 μm film thickness). Based on thorough analysis of the fragmentation during electron ionization we developed a strategy to deduce structural information of the oxysterols. Optimized sample preparation includes (i) extraction with a mixture of n-hexane/iso-propanol, (ii) removal of cholesterol by solid phase extraction with unmodified silica, and (iii) trimethylsilylation. The method was successfully applied on the analysis of brain samples, showing consistent results with previous studies and a good intra- and interday precision of ≤20%. Finally, we used the method for the investigation of oxysterol formation during oxidative stress in HepG2 cells. Incubation with tert-butyl hydroperoxide led to a massive increase in free radical formed oxysterols (7-keto-chol > 7β-OH-chol >> 7α-OH-chol), while 24 h incubation with the glutathione peroxidase 4 inhibitor RSL3 showed no increase in oxidative stress based on the oxysterol pattern. Overall, the new method described here enables the robust analysis of a biologically meaningful pattern of oxysterols with high sensitivity and precision allowing us to gain new insights in the biological formation and role of oxysterols.     

New Type Anode for Calcium Ion Batteries Based on Silicon Carbide Monolayer

Silicon - A theoretical research study was conducted into the possibility of using a two-dimensional graphene-like material silicon carbide nano-sheet (2D-SiCNS) as an anode in rechargeable Ca-ion...     

Effects of annealing on the structural and magnetic properties of flame spray pyrolyzed MnFe2O4 nanoparticles

In this study, manganese ferrite (MnFe₂O₄) nanoparticles were produced through flame spray pyrolysis (FSP). To investigate the effects of heat treatment, the nanoparticles were annealed between 400 and 650°C for 4 h in air in a comparative manner. The structural, chemical, morphological, and magnetic properties of the nanoparticles were evaluated using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), dynamic light scattering (DLS), and vibrating sample magnetometry (VSM), respectively. The XRD results showed that the nanoparticles synthesized by the FSP method exhibited the MnFe₂O₄ spinel ferrite structure. The annealing process led to the decomposition of MnFe₂O₄ into various phases. According to the morphological analysis, the as-synthesized particles were hemispherical–cubic in shape and had an average particle size of less than 100 nm. In addition, the chemical bond structures of the nanoparticles were confirmed in detail by XPS elemental analysis. The highest saturation magnetization was recorded as 33.50 emu/g for the as-produced nanoparticles. The saturation magnetization of the nanoparticles decreased with increasing annealing temperature, while coercivity increased.