Solubility of chlorine in aqueous hydrochloric acid solutions

The solubility of chlorine in aqueous hydrochloric acid solutions was studied. The effects of HCl concentration and temperature on the solubility were evaluated, and the thermodynamic parameters of the dissolution were calculated. It was found that the solubility isotherms had a minimum at about 0.5M HCl concentration at all the temperatures studied and that solubility decreased with the increase of temperature at all the HCl concentration range investigated.     

Immunohistochemical analysis of mycosis fungoides on paraffin-embedded tissue sections

Mycosis fungoides (MF) is typically characterized by dermal and epidermal infiltration of T lymphocytes with a helper/inducer phenotype. Immunophenotypic analysis of such cases was traditionally performed by flow cytometry or immunohistochemistry on cryostat sections. With the advent of new monoclonal antibodies developed against T-cell antigens, including CD3, CD4, CD5, and CD8, it is now possible to immunophenotype T-cell subpopulations in paraffin-embedded tissues. To investigate the potential use of these antibodies for the evaluation of cutaneous lesions, 35 specimens (34 skin and 1 lymph node) from 29 patients with MF were retrospectively reviewed and immunophenotyped in paraffin sections with antibodies to CD3 (T-cell CD3), CD4 (NCL-CD4-1F6), CD5 (NCL-CD5-4C7), CD8 (CD8/144B), and CD20 (L26). Epidermal and dermal distribution of T and B cells were analyzed, and we assessed the ratios of CD4+ to CD8+ T cells. All of our 35 cases demonstrated a predominant CD3+ T-cell population. In 32 cases, the neoplastic cells expressed CD3, CD4, and CD5 consistent with a T-helper/inducer phenotype. In three cutaneous cases, the neoplastic CD4+ T cells showed minimal or absent expression of CD5, indicating an aberrant phenotype. In the majority of cases, minimal CD8+ T cells were present in the background, but in four cases, the CD4:CD8 ratios were 2:1 or less. Thirty-two cutaneous cases demonstrated epidermotropism exclusively by CD4+ T cells; one case showed both CD4+ and CD8+ T cells. In 17 cutaneous cases, scattered dermal CD20+ B cells were found individually or in small clusters within the background surrounding the neoplastic infiltrates. We concluded, therefore, that the immunophenotypic analysis of T-cell subpopulations using monoclonal antibodies of CD3, CD4, CD5, and CD8 was useful for histologic evaluation and confirmation of MF lesions in paraffin-embedded tissue. These antibodies might also provide an effective method of immunophenotyping other neoplastic and non-neoplastic T-cell populations in paraffin-embedded tissues.     

Synthesis and characterization of conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester with pyrrole

A new polythiophene containing a cholesteryl side chain in the -position was chemically polymerised in nitromethane/carbontetrachloride using FeCl₃ as the oxidizing agent. Polymerisation was also achieved by constant current electrolysis in dichloromethane. Subsequently, conducting copolymers of thiophene-3-yl acetic acid cholesteryl ester (CM), PCM1 (obtained from chemical polymerisation method) and PCM4 (obtained from constant current electrolysis) with pyrrole were synthesized using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolyses. Characterizations of the samples were performed by CV, FTIR, NMR, DSC, TGA and SEM analyses. Electrical conductivities were measured by the four-probe technique.     

Investigation of Corrosion Behavior of Borided Gear Steels

In this study, corrosion behaviors of GS18NiMoCr36 (GS 18) and GS32NiCrMo6.4 (GS 32) gear steels borided in Ekabor-II powder at the temperature of 950 °C for 2 and 6 h were investigated in a 6 % M HCI acid solution. The boride layer was characterized by optical microscopy, X-ray diffraction technique and the Micro-Vickers hardness tester. X-ray diffraction analysis of boride layers on the surface of the steels revealed the existence of FeB, Fe₂B, CrB and Cr₂B compounds. The thickness of the boride layer increases by increasing boriding time for gear steels. The hardness of the boride compounds formed on the surface of the steels GS 18 and GS 32 ranged from 1,728 to 1,905 HV_0,05 and 1,815 to 2,034 HV_0,05 respectively, whereas Vickers hardness values of the untreated steels GS 18 and GS 32 were 335 HV_0,05 and 411 HV_0,05, respectively. The corrosion resistance of borided gear steels is higher compared with that of unborided steels. The boride layer increased the corrosion resistances of gear steels 4–6-fold.     

A comparative study on the diagnosis of maedi-visna infection in serum and colostrum samples using agar gel immunodiffusion (AGID) technique

Serum/colostrum pairs were collected from 245 ewes in 6 sheep herds which had been determined previously to be infected with MV virus and were tested against maedi-visna infection using AGID test. Positive rates were detected as 3.8-41.2% in tested flocks. Serum and colostrum samples obtained from 53 sheep were positive for MV virus specific antibodies by AGID test. 16 colostrum samples were negative although serum samples obtained from the same animals were found to be positive for MV antibodies. Of the 245 sera and colostrum pairs tested, there was total agreement of results (+ or -) in 229 and disagreement in the results with the other 16 serum/colostrum pairs. Of the latter, all serum samples were positive and all colostrum samples were negative for MV antibodies. This study compared colostrum and serum samples for the determination of MV antibodies using AGID test under field conditions on naturally infected animals and on healthy animals. The results show that colostrum antibodies can be detected using AGID test and that colostrum is a reliable material to determine anti-MV virus antibodies. The procedure can be used for herd diagnosis.     

Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution

An elastic-plastic thermal stress analysis was carried out on an orthotropic aluminum metal matrix composite disc with a hole by using an analytical solution. The thermal load distribution was chosen to vary parabolically from inner surface to outer surface. An aluminum composite disc reinforced curvilinearly by steel fibers was produced under hydraulic press. The mechanical properties of the composite disc were obtained from experiments by using strain gauges. A computer program was developed to calculate the thermal stresses under a parabolic temperature from inner surface to outer surface. The material was assumed to be non-linear hardening. The elastic-plastic solution was performed for the plastic region expanded around the inner surface by an analytical method. The magnitude of the tangential stress component for elastic and elastic-plastic was higher than the magnitude of the radial stress component. Besides, the tangential stress component was compressive on the inner surface and tensile on the outer surface. The magnitude of the tangential residual stress component was the highest on the inner surface of the composite disc. The plastic region began at the inner surface of disc. This paper was recommended for publication in revised form by Associate Editor Joo Ho Choi Gürkan Altan is a Research Assistant of Mechanical Engineering at the University of Pamukkale, Denizli, Turkey. Gürkan Altan received the B.E. degree (1999) in mechanical engineering from Dokuz Eylül University, Izmir, and the M.S. degree (2004) in mechanical engineering from Pamukkale University, Denizli. Gürkan Altan is interested in production and applications of composite materials. Currently he is involved in the development and application of joints of composite structures.     

Dissolution kinetics of an oxidized copper ore in water saturated by chlorine

Dissolution kinetics of an oxidized copper ore (mainly malachite) in water saturated by Cl₂ has been studied. The effect of particle size, flow rate of the gas, temperature and solid-liquid ratio has been determined. The dissolution rate increased with decrease in particle size and solid-liquid ratio and with increase in the gas flow rate and temperature. It has been found that the dissolution proceeds in two stages and is controlled by diffusion through the ash layer in each stage. The activation energies for the first and second stage are 27.15 and 20.21 kJ mol^?1, respectively.     

Deposition and Characterization of Tungsten Carbide Thin Films by DC Magnetron Sputtering for Wear-Resistant Applications

In this study, WC (tungsten carbide) thin films were deposited on high-speed steel (AISI M2) and Si (100) substrates by direct current magnetron sputtering of a tungsten carbide target having 7% cobalt as binding material. The properties of the coatings have been modified by the change in the bias voltages from grounded to 200 V. All the coatings were deposited at 250°C constant temperature. The microstructure and the thickness of the films were determined from cross-sectional field-emission gun scanning electron microscope micrographs. The chemical composition of the film was determined by electron probe micro analyzer. The x-ray diffractometer has been used for the phase analyses. Nanoindentation and wear tests were used to determine the mechanical and tribological properties of the films, respectively. It is found that the increase in the bias voltages increased drastically the hardness and elastic modulus, decreased the friction coefficient values and increased the wear resistance of tungsten carbide thin films by a phase transformation from metallic W (tungsten) to a nonstoichiometric WC_1?x (tungsten carbide) phase.     

Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy

Al4Cu2Ni2Mg alloy is an age-hardenable aluminum alloy. The effect of different solution and aging heat treatment conditions on the microstructure, hardness and wear resistance of the alloy was studied. The cast specimens were solution treated and then artificially aged. Optical microscopy and scanning electron microscopy were used to investigate the microstructures of the specimens. The hardness and wear tests were applied to understanding the effects of heat treatment. After aging for 8 h, the hardness of the alloy increases from HV₁₀ 96.5 to 151.1. Aging treatment for a longer duration causes a drop in the hardness because of over aging. Increasing the hardness of the alloy increases the wear resistance. As a result of all tests, solution heat treatment at 540 °C for 8 h and aging at 190 °C for 8 h were chosen for optimum heat treatment conditions for this alloy.     

Preparation and Characterisation of Novel Composites Based on a Radiation Grafted Membrane for Fuel Cells

Novel composites for fuel cells were prepared via two different methods using a radiation grafted membrane, prepared from poly(ethylene‐alt‐tetrafluoroethylene) (ETFE) and styrene, and commercial Nafion®112 as the substrates. The first method was based on chemical polymerisation of pyrrole (Py) on the membrane followed by platinum (Pt) deposition by chemical reduction. The second method was based on direct deposition of Pt on the membrane by several steps of initial composite formation and surface electrodeposition. Polypyrrole (PPy) was coated as a layer only on the surface of the membrane. The thickness of PPy layer, proton conductivity of the composites and Pt loading could be controlled with Py polymerisation time. Moreover, the deposition of Pt on the surface as the granular particles was achieved by the first method while Pt deposition occurred as the aggregates of particles on the surface of the membrane by the second method which yielded wavy and rough surfaces. The first method offered a simple, quick, reproducible and effective procedure, yet some of the Pt particles peeled off from the surface of the composites. The second method required complex, multistep and tedious procedure with a high amount of Pt precursor, while Pt particles were more stable in this case.